Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
TIMKEN YTU 1-1/2 SGT General Purpose Take-Up Unit Bearing - General Purpose Take-Up Unit Bearings
TIMKENGeneral Purpose Take-Up Unit Bearings

TIMKEN YTU 1-1/2 SGT General Purpose Take-Up Unit Bearing

TIMKEN Take-Up Bearing YTU 1 1/2 SGT adalah bantalan tarik (take-up bearing) serbaguna yang dirancang untuk aplikasi industri berat. Produk ini memiliki lubang (bore) 1 1/2 inci, tipe radial ball dengan insert baja…

SKU 3G-OTH-103325

Juga terdaftar sebagai: YTU112SGT · YTU 1 1 2 SGT · YTU-1-1-2-SGT

Merek
TIMKEN
Item
YTU 1-1/2 SGT General Purpose Take-Up Unit Bearing
Kategori
General Purpose Take-Up Unit Bearings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

TIMKEN
Manufacturer Part Number
YTU 1-1/2 SGT
Type
Radial Ball, Steel Insert, Cast Iron Housing
Bore
1 1/2 in
Expansion Type
Fixed
Compatible Frame
TU5 Frame
System of Measurement
Inch
Bearing Insert Material
Steel

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

TIMKEN Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

TIMKEN Take-Up Bearing YTU 1 1/2 SGT adalah bantalan tarik (take-up bearing) serbaguna yang dirancang untuk aplikasi industri berat. Produk ini memiliki lubang (bore) 1 1/2 inci, tipe radial ball dengan insert baja dan rumah besi cor (cast iron housing). Bearing ini termasuk tipe fixed (ekspansi tetap) dan kompatibel dengan frame TU5 Frame. Sebagai komponen peralatan industri yang andal, TIMKEN YTU 1 1/2 SGT merupakan pilihan tepat untuk sistem konveyor dan permesinan yang memerlukan penyesuaian tegangan sabuk.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi TIMKEN Take-Up Bearing YTU 1 1/2 SGT?

TIMKEN Take-Up Bearing YTU 1 1/2 SGT memiliki lubang (bore) 1 1/2 inci, tipe radial ball dengan insert baja dan rumah besi cor (cast iron housing). Bearing ini termasuk tipe fixed (ekspansi tetap) dan kompatibel dengan frame TU5 Frame. Sistem pengukuran menggunakan inci.

Untuk apa TIMKEN Take-Up Bearing YTU 1 1/2 SGT digunakan?

TIMKEN Take-Up Bearing YTU 1 1/2 SGT digunakan pada sistem konveyor dan peralatan industri untuk menyesuaikan tegangan sabuk atau rantai. Bearing ini membantu menjaga posisi poros tetap stabil dan mengurangi getaran, sehingga memperpanjang umur komponen mesin.

Di mana beli TIMKEN Take-Up Bearing YTU 1 1/2 SGT di Indonesia?

Anda dapat membeli TIMKEN Take-Up Bearing YTU 1 1/2 SGT melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai, sehingga Anda dapat fokus pada operasional pabrik.

Bagaimana cara memilih TIMKEN Take-Up Bearing yang tepat?

Pilih TIMKEN Take-Up Bearing berdasarkan ukuran lubang (bore), tipe ekspansi (fixed atau expansion), dan kompatibilitas frame. Untuk YTU 1 1/2 SGT, pastikan bore 1 1/2 inci dan frame TU5 Frame sesuai dengan kebutuhan aplikasi Anda. Konsultasikan dengan teknisi untuk memastikan kesesuaian.

Digunakan dalam

Aplikasi umum untuk TIMKEN
Conveyor systems — TIMKEN RA115RRB spherical insert bearings for idler rollers and pulleys
Agricultural equipment — TIMKEN RCSM1 cartridge bearing units for tillage and harvesting machinery
Material handling — TIMKEN YASM 1-7/16 pillow block bearings for belt conveyors and elevators
Industrial fans — TIMKEN 6319 radial ball bearings for high-speed fan shafts
Pump drives — TIMKEN SCJ 5/8 flange-mount bearings for close-coupled pump applications
Packaging machinery — TIMKEN YCJ 30 SGT flange-mount bearings for indexing and feed mechanisms

TIMKEN Produk

3G Electric memasok TIMKEN general purpose take-up unit bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Inch-system radial/deep groove ball insert bearing with 1 11/16 in bore, 3 17/32 in OD, and 0.866 in outer ring width. Double-sealed closure protects against contaminants. Suitable for applications such as conveyors, fans, and agricultural machinery where moderate radial and axial loads occur
TIMKEN
Inch-system radial/deep groove ball insert bearing with 1 11/16 in bore, 3 17/32 in OD, and 0.866 in outer ring width. Double-sealed closure protects against contaminants. Suitable for applications such as conveyors, fans, and agricultural machinery where moderate radial and axial loads occur
Inch-system radial/deep groove ball insert bearing with 1 3/4 in bore, 3 17/32 in OD, and 0.866 in outer ring width. Double-sealed closure protects against contaminants. Suitable for applications such as conveyors, fans, and agricultural machinery where moderate radial and axial loads are present
TIMKEN
Inch-system radial/deep groove ball insert bearing with 1 3/4 in bore, 3 17/32 in OD, and 0.866 in outer ring width. Double-sealed closure protects against contaminants. Suitable for applications such as conveyors, fans, and agricultural machinery where moderate radial and axial loads are present
This TIMKEN pillow block ball bearing features a cast iron housing with set screws for shaft mounting and a shroud. It has a 1 1/4 in bore, 1 43/64 in shaft height, and a maximum speed of 5,500 RPM with grease. The bearing uses a 1/2 in mounting bolt and is designed for supporting rotating shafts in industrial machinery such as conveyors, fans, and pumps
TIMKEN
This TIMKEN pillow block ball bearing features a cast iron housing with set screws for shaft mounting and a shroud. It has a 1 1/4 in bore, 1 43/64 in shaft height, and a maximum speed of 5,500 RPM with grease. The bearing uses a 1/2 in mounting bolt and is designed for supporting rotating shafts in industrial machinery such as conveyors, fans, and pumps
TIMKEN YA103RR is an inch-system radial/deep groove ball insert bearing with a 1 3/16 in bore, 2 7/16 in OD, and 0.709 in outer ring width. It features double sealed closure and set screw locking. Suitable for applications such as conveyors, fans, and agricultural machinery where moderate radial and axial loads are present
TIMKEN
TIMKEN YA103RR is an inch-system radial/deep groove ball insert bearing with a 1 3/16 in bore, 2 7/16 in OD, and 0.709 in outer ring width. It features double sealed closure and set screw locking. Suitable for applications such as conveyors, fans, and agricultural machinery where moderate radial and axial loads are present

Lainnya dari TIMKEN

Lihat semua TIMKEN suku cadang →
Fixed expansion take-up unit bearing with a steel radial ball insert and 1 11/16 in bore. Designed for TU5 frame, inch system. Used in conveyor systems and material handling equipment to support rotating shafts and maintain belt tension
TIMKEN
Fixed expansion take-up unit bearing with a steel radial ball insert and 1 11/16 in bore. Designed for TU5 frame, inch system. Used in conveyor systems and material handling equipment to support rotating shafts and maintain belt tension
Radial ball take-up unit bearing with a 1 1/4 in bore, steel insert, and cast iron housing. Fixed expansion type for use with TU3 Frame. Suitable for maintaining belt tension in conveyor systems and other industrial machinery requiring radial load support and shaft alignment
TIMKEN
Radial ball take-up unit bearing with a 1 1/4 in bore, steel insert, and cast iron housing. Fixed expansion type for use with TU3 Frame. Suitable for maintaining belt tension in conveyor systems and other industrial machinery requiring radial load support and shaft alignment
Radial ball take-up unit bearing with steel insert and cast iron housing. Bore diameter 1 7/16 in, fixed expansion type, compatible with TU3 frame. Used in conveyor systems and material handling equipment for belt tension adjustment under moderate loads
TIMKEN
Radial ball take-up unit bearing with steel insert and cast iron housing. Bore diameter 1 7/16 in, fixed expansion type, compatible with TU3 frame. Used in conveyor systems and material handling equipment for belt tension adjustment under moderate loads
Radial ball bearing unit with fixed expansion type, steel insert, and cast iron housing. Bore diameter 2 7/16 inches. Suitable for industrial conveyor systems and material handling equipment requiring shaft alignment adjustments under radial loads
TIMKEN
Radial ball bearing unit with fixed expansion type, steel insert, and cast iron housing. Bore diameter 2 7/16 inches. Suitable for industrial conveyor systems and material handling equipment requiring shaft alignment adjustments under radial loads
Radial ball bearing unit with steel insert and cast iron housing, 1 in bore, fixed expansion type, for TU1 frame. Used in conveyor systems and industrial machinery to support rotating shafts and maintain belt tension
TIMKEN
Radial ball bearing unit with steel insert and cast iron housing, 1 in bore, fixed expansion type, for TU1 frame. Used in conveyor systems and industrial machinery to support rotating shafts and maintain belt tension
Radial ball bearing unit with fixed expansion type, steel insert, and cast iron housing. 25 mm bore. Suitable for conveyor systems and industrial machinery requiring shaft support and belt tension adjustment
TIMKEN
Radial ball bearing unit with fixed expansion type, steel insert, and cast iron housing. 25 mm bore. Suitable for conveyor systems and industrial machinery requiring shaft support and belt tension adjustment
Fixed expansion take-up unit bearing with a 1 3/4 in bore, steel insert, and cast iron housing. Designed for TU5 Frame, suitable for maintaining belt tension in conveyor systems and other industrial machinery
TIMKEN
Fixed expansion take-up unit bearing with a 1 3/4 in bore, steel insert, and cast iron housing. Designed for TU5 Frame, suitable for maintaining belt tension in conveyor systems and other industrial machinery
Radial ball bearing with steel insert and cast iron housing. Fixed expansion type for use with TU3 Frame. 1 3/16 in bore, inch system. Suitable for conveyor systems and industrial machinery requiring belt tension maintenance and shaft support
TIMKEN
Radial ball bearing with steel insert and cast iron housing. Fixed expansion type for use with TU3 Frame. 1 3/16 in bore, inch system. Suitable for conveyor systems and industrial machinery requiring belt tension maintenance and shaft support