Topog-E Series 3000 Gaskets – expanded PTFE high pressure

[{"filename":"Topog-E-3G-OTH-02633-DataSheet-Rev1-1.pdf","text":"Topog-E® Series 3000 Gaskets\n\n MATERIAL COMPOSITION AND APPLICATION SIZES\nTopog-E® S-3000 gaskets are especially designed for inspection ports of boilers and tanks. Topog-E® Series 3000 gaskets are\n available in almost any shape or size.\nThey provide reliable sealability with low stress and exceptional dimension stability.\n As a standard, Topog-E® S-3000 is\n provided in 1/8\" (3.2mm) thickness.\nThis form of gasketing is processed by layering over 150 thin films of expanded pure Other thicknesses are available\npolytetrafluoroethylene (PTFE). The result is a bi-directional, soft, highly compressible upon request.\ngasket for longer life and trouble-free sealing. Its form-in-place versatility is perfect for\n ORDERING\nsealing boiler plates that are worn, warped or scored. The high compressibility of the\nTopog-E® S-3000 gasket enables it to effectively fill flange imperfections for a tight, leak- Please either contact your local\nfree seal. Unlike conventional PTFE which is prone to cold flow Topog-E® S-3000 has good distributor for Topog-E® Series 3000\n gaskets or contact Topog-E® directly\ncreep resistance and bolt torque retention properties. It does not support bacterial growth for details of your nearest distributor.\nor cause product contamination and is FDA compliant. It has virtually no shelf-life concerns\nsince PTFE is unaffected by normal environmental conditions. SERVICE SUMMARY\n Temperature: -450°F (-268°C) to\nTopog-E® S-3000 has excellent resistance properties to chemical attack. It is ideal for most +600°F (+315°C)\nchemical services at temperatures to -450°F (-268°C ) to 600°F (315°C) and pressure Pressure: 3,000 psig (206 bar)\nto 3,000 psi (206 bar). When high levels of CO2 in the steam and condensate require M Factor: 2 (Smooth Flange Surface)\n Y Stress: 2,800 psi\nincreased levels of neutralizing amines to prevent condensate corrosion. This chemical (Smooth Flange Surface)\ninjection with increasing alkalinity could potentially contest the upper limits of resistance\nwith other gasket compounds. In challenging thermal cycling and elevated temperature\napplications, the Topog-E® S-3000 gasket solution can reduce the process safety and\nproduction downtime risks caused by the use of an incorrect gasket material.\n\n\nTopog-E® Series 3000 gasket advantages:\nHigh adaptability, suitable for flanges with corrosion and with uneven sealing surface\nPressure test and service with the same gasket\nVery easy installation and removal\nAnti-sticking material, low effort for surface cleaning when installing a new gasket\nNo embrittlement of the gasket in storage or in service\nPure PTFE, conforms to FDA standards\n\n\n\n\n Topog-E, LLC · 1150 Guadalupe Drive · Cibolo, Texas 78108\n 918-587-6649 · info@topog-e.com · www.topog-e.com\n All information in this data sheet is based on data believed to be reliable; however, we make no guarantee or warranty of the perfor-\n mance of Topog-E® Series 3000 gaskets. Due to numerous application-specific factors that can influence service life, it is always advis-\n able to first test Topog-E® Series 3000 gaskets in a particular application to determine their ultimate suitability."}]