TRACXP Calibration Gas: TXP-T40, Nitrogen, Cylinder, 105 L Cylinder Capacity, Carbon Dioxide
The TRACXP TXP-T40 Calibration Gas is a 105 L cylinder of nitrogen background gas with a 2.5% carbon dioxide mixture, designed for use with TXP-T40 fixed gas detectors. This calibration gas enables accurate sensor…
SKU 3G-OTH-551847
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TRACXP TXP-T40 Calibration Gas is a 105 L cylinder of nitrogen background gas with a 2.5% carbon dioxide mixture, designed for use with TXP-T40 fixed gas detectors. This calibration gas enables accurate sensor verification and span adjustment for CO2 detection applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is TRACXP TXP-T40 calibration gas used for?
The TRACXP TXP-T40 calibration gas is used to verify and adjust the accuracy of TXP-T40 fixed gas detectors. It contains 2.5% carbon dioxide in a nitrogen background, enabling precise sensor span calibration for CO2 detection in industrial safety applications.
What are the specifications of TRACXP TXP-T40 calibration gas?
The TRACXP TXP-T40 calibration gas is supplied in a 105 L cylinder with a nitrogen background and a 2.5% carbon dioxide mixture. It is designed specifically for use with TXP-T40 fixed gas detectors. The manufacturer part number is 37-0073-5264-2.
Where to buy TRACXP TXP-T40 calibration gas worldwide?
3G Electric supplies the TRACXP TXP-T40 calibration gas to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive the correct 105 L cylinder with 2.5% CO2 in nitrogen for your TXP-T40 detector. Contact us for a quote.
How to use TRACXP TXP-T40 calibration gas for detector calibration?
Connect the TRACXP TXP-T40 calibration gas cylinder to the TXP-T40 detector's calibration port. Apply the 2.5% CO2 mixture at the recommended flow rate, then follow the detector's manual to perform zero and span adjustments. Always use fresh gas and check the cylinder expiry date.
TRACXP Produk
3G Electric memasok TRACXP calibration gases for fixed gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
