TRITAN 2 Bolt Flange Bearing: Radial Ball, 3/4 in Bore, Cast Iron, Set Screws
The TRITAN 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 3/4 in cylindrical bore and a cast iron housing. It features set screws for shaft retention and uses NLGI #2 equivalent…
SKU 3G-OTH-101022
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TRITAN 2 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 3/4 in cylindrical bore and a cast iron housing. It features set screws for shaft retention and uses NLGI #2 equivalent lubricant. The bearing has a 5/16 in mounting bolt size and a 3 35/64 in length, with an inch system of measurement.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a TRITAN 2 Bolt Flange Bearing used for?
This TRITAN flange bearing supports rotating shafts in conveyors, fans, and light industrial machinery. Its cast iron housing and set-screw locking suit moderate loads and speeds. 3G Electric supplies this bearing across 14 industrial departments, including power transmission and material handling.
What are the specifications of the TRITAN SBLF204-12G flange bearing?
The TRITAN SBLF204-12G has a 3/4 in cylindrical bore, cast iron housing with set screws, and NLGI #2 equivalent lubricant. Mounting bolt size is 5/16 in, overall length is 3 35/64 in, and it uses inch-system measurements. 3G Electric sources this genuine TRITAN part for global delivery.
Where to buy TRITAN flange bearings worldwide?
3G Electric supplies TRITAN flange bearings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source genuine parts like the SBLF204-12G and deliver to your facility. Contact us for availability and lead time.
How to install a TRITAN 2 Bolt Flange Bearing with set screws?
Align the bearing squarely on the mounting surface, tighten bolts to the specified torque, then secure the shaft by tightening the set screws evenly. Use a thread-locking compound on the set screws to prevent loosening under vibration. 3G Electric can advise on proper installation practices.
Digunakan dalam
Aplikasi umum untuk TRITANTRITAN Produk
3G Electric memasok TRITAN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
