TRITAN Pillow Block Bearing: 30 mm Bore, Cast Iron, Set Screws, 42.8 mm Shaft Ht
The TRITAN Pillow Block Bearing (30 mm Bore) is a general purpose pillow block ball bearing with a cast iron housing and set screw locking. It features a 30 mm bore, 42.8 mm shaft height, 160 mm overall length, and…
SKU 3G-OTH-104657
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TRITAN Pillow Block Bearing (30 mm Bore) is a general purpose pillow block ball bearing with a cast iron housing and set screw locking. It features a 30 mm bore, 42.8 mm shaft height, 160 mm overall length, and M12 mounting bolt size, conforming to ISO standards in metric measurement (MPN UCP206-30MM).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a TRITAN pillow block bearing used for?
A TRITAN pillow block bearing supports rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast iron housing and set screw locking provide reliable alignment and load support in general purpose applications across manufacturing, material handling, and HVAC systems.
What are the specifications of the TRITAN UCP206-30MM pillow block bearing?
The TRITAN UCP206-30MM has a 30 mm bore, 42.8 mm shaft height, 160 mm overall length, and M12 mounting bolt size. It features a cast iron housing with set screw locking, conforms to ISO standards, and uses metric measurement. This is a general purpose pillow block ball bearing.
Where to buy TRITAN pillow block bearings worldwide?
3G Electric supplies TRITAN pillow block bearings worldwide, handling full logistics and customs clearance for international delivery. As a global industrial solutions provider, we source and deliver genuine TRITAN components to support your maintenance and production needs across any region.
How to install a TRITAN pillow block bearing with set screws?
Mount the bearing on a clean, level surface using M12 bolts through the base slots. Align the shaft through the bore, then tighten the set screws evenly against the shaft using a hex key. Ensure the housing is not distorted and the shaft rotates freely before final torque.
Digunakan dalam
Aplikasi umum untuk TRITANTRITAN Produk
3G Electric memasok TRITAN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
