TRITAN Pillow Block Bearing: 50 mm Bore, Cast Iron, Set Screws, 57.1 mm Shaft Ht
The TRITAN Pillow Block Bearing with a 50 mm bore is a general purpose pillow block ball bearing designed for metric applications. This cast iron unit features set screws, a 57.1 mm shaft height, and a 206 mm overall…
SKU 3G-OTH-105881
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TRITAN Pillow Block Bearing with a 50 mm bore is a general purpose pillow block ball bearing designed for metric applications. This cast iron unit features set screws, a 57.1 mm shaft height, and a 206 mm overall length, with an M12 mounting bolt size. It meets ISO standards and is identified by manufacturer part number UCP210-50MM.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TRITAN UCP210-50MM pillow block bearing used for?
The TRITAN UCP210-50MM is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery. It is suitable for metric applications such as conveyors, fans, and material handling equipment where a 50 mm bore and cast iron housing provide reliable alignment and load support.
What are the specifications of the TRITAN pillow block bearing 50 mm bore?
The TRITAN UCP210-50MM has a 50 mm bore, cast iron housing with set screws, 57.1 mm shaft height, 206 mm overall length, and M12 mounting bolt size. It meets ISO standards and uses metric measurements. The manufacturer part number is UCP210-50MM.
Where to buy TRITAN pillow block bearings worldwide?
3G Electric supplies TRITAN pillow block bearings worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the UCP210-50MM or other TRITAN bearing models for your application.
How to install a TRITAN set screw pillow block bearing?
To install the TRITAN UCP210-50MM, mount the bearing on a clean, flat surface using M12 bolts through the base slots. Align the shaft through the bore, then tighten the set screws evenly against the shaft to secure it. Ensure proper lubrication before operation and check alignment to prevent premature wear.
Digunakan dalam
Aplikasi umum untuk TRITANTRITAN Produk
3G Electric memasok TRITAN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
