Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
TRITAN UCPK205-15 Low-Base Pillow Block Ball Bearing - Low-Base Pillow Block Ball Bearings
TRITANLow-Base Pillow Block Ball Bearings

TRITAN UCPK205-15 Low-Base Pillow Block Ball Bearing

Bantalan blok bantal (pillow block bearing) TRITAN tipe UCPK205-15 adalah komponen peralatan industri yang dirancang untuk menopang poros berukuran 15/16 inci. Terbuat dari besi cor dengan sistem pengunci set screw…

SKU 3G-OTH-103204

Juga terdaftar sebagai: UCPK20515 · UCPK205 15

Merek
TRITAN
Item
UCPK205-15 Low-Base Pillow Block Ball Bearing
Kategori
Low-Base Pillow Block Ball Bearings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

TRITAN
Manufacturer Part Number
UCPK205-15
Type
Cast Iron, Set Screws
Shaft Ht
1 19/64 in
Standards
AFBMA
Mounting Bolt Size
M10
System of Measurement
Inch

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

TRITAN Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Bantalan blok bantal (pillow block bearing) TRITAN tipe UCPK205-15 adalah komponen peralatan industri yang dirancang untuk menopang poros berukuran 15/16 inci. Terbuat dari besi cor dengan sistem pengunci set screw, bantalan ini memiliki tinggi poros (shaft ht) 1 19/64 inci dan ukuran baut pemasangan M10. Produk ini memenuhi standar AFBMA, menjadikannya pilihan andal untuk aplikasi mekanis yang memerlukan dukungan poros presisi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi TRITAN Pillow Block Bearing UCPK205-15?

TRITAN Pillow Block Bearing UCPK205-15 memiliki ukuran lubang poros (bore) 15/16 inci, tinggi poros 1 19/64 inci, dan ukuran baut pemasangan M10. Terbuat dari besi cor dengan sistem set screws dan memenuhi standar AFBMA.

Untuk apa pillow block bearing TRITAN digunakan?

Pillow block bearing TRITAN digunakan untuk menopang poros berputar pada berbagai peralatan industri seperti konveyor, pompa, dan mesin pabrik. Desain low-base memudahkan pemasangan pada permukaan datar.

Di mana beli TRITAN Pillow Block Bearing di Indonesia?

Anda dapat membeli TRITAN Pillow Block Bearing UCPK205-15 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman lancar.

Bagaimana cara memilih pillow block bearing yang tepat?

Pilih pillow block bearing berdasarkan ukuran poros (bore), material, dan beban yang ditopang. TRITAN UCPK205-15 cocok untuk poros 15/16 inci dengan material besi cor dan set screws, ideal untuk aplikasi industri ringan hingga menengah.

Digunakan dalam

Aplikasi umum untuk TRITAN
Poultry processing conveyors — TRITAN food-grade radial ball bearings (SS3829 2RS FM222) with double contact seals
Material handling systems — TRITAN spherical insert bearings (SB205-16G) with set screw locking for shaft mounting
High-temperature oven rollers — TRITAN miniature ball bearings (SSRI814 ZZ SRL) rated to 302°F
Self-lubricating pivot joints — TRITAN spherical plain bearings (GE 30TE 2RS) with PTFE sliding surface
Flange-mounted conveyor idlers — TRITAN 4-bolt flange bearings (UCF210-31) in cast iron housings
Chain drive repairs — TRITAN offset links (40-1R OSL) for ANSI #40 roller chains

TRITAN Produk

3G Electric memasok TRITAN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
TRITAN Pillow Block Bearing: 1 in Bore, Cast Iron, Eccentric Collar, 1 27/64 in Shaft Ht (MPN HCP205-16)
TRITAN
TRITAN Pillow Block Bearing: 1 in Bore, Cast Iron, Eccentric Collar, 1 27/64 in Shaft Ht (MPN HCP205-16)
TRITAN Pillow Block Bearing: 1 1/2 in Bore, Cast Iron, Eccentric Collar, 1 59/64 in Shaft Ht (MPN HCP208-24)
TRITAN
TRITAN Pillow Block Bearing: 1 1/2 in Bore, Cast Iron, Eccentric Collar, 1 59/64 in Shaft Ht (MPN HCP208-24)
Radial/deep groove ball insert bearing with double-sealed closure and set-screw locking. Bore 2 7/16 in, OD 4 21/64 in, outer ring width 1.252 in. Inch system. Used in industrial machinery such as conveyors and agricultural equipment for radial load support and shaft misalignment accommodation
TRITAN
Radial/deep groove ball insert bearing with double-sealed closure and set-screw locking. Bore 2 7/16 in, OD 4 21/64 in, outer ring width 1.252 in. Inch system. Used in industrial machinery such as conveyors and agricultural equipment for radial load support and shaft misalignment accommodation
Inch-system radial/deep groove ball insert bearing with 1 1/4 in bore, 2 7/16 in OD, and 0.748 in outer ring width. Double-sealed closure and set-screw shaft locking. Suitable for moderate-speed, moderate-load applications such as conveyors, fans, and agricultural equipment where shaft misalignment must be accommodated
TRITAN
Inch-system radial/deep groove ball insert bearing with 1 1/4 in bore, 2 7/16 in OD, and 0.748 in outer ring width. Double-sealed closure and set-screw shaft locking. Suitable for moderate-speed, moderate-load applications such as conveyors, fans, and agricultural equipment where shaft misalignment must be accommodated
Inch-system radial/deep groove ball bearing with 1 3/8 in bore, 2 53/64 in OD, and 0.937 in outer ring width. Double-sealed closure with set-screw locking. Used in power transmission and material handling equipment such as conveyors and fans where moderate radial and axial loads occur
TRITAN
Inch-system radial/deep groove ball bearing with 1 3/8 in bore, 2 53/64 in OD, and 0.937 in outer ring width. Double-sealed closure with set-screw locking. Used in power transmission and material handling equipment such as conveyors and fans where moderate radial and axial loads occur
Inch-system radial/deep groove ball insert bearing with double-sealed closure. Bore 1 7/8 in, OD 3 17/32 in, outer ring width 1.126 in. Secured by set screws. Used in conveyors, agricultural equipment, and material handling systems requiring radial load support and misalignment accommodation
TRITAN
Inch-system radial/deep groove ball insert bearing with double-sealed closure. Bore 1 7/8 in, OD 3 17/32 in, outer ring width 1.126 in. Secured by set screws. Used in conveyors, agricultural equipment, and material handling systems requiring radial load support and misalignment accommodation

Lainnya dari TRITAN

Lihat semua TRITAN suku cadang →
This low-base pillow block ball bearing features a cast iron housing with an eccentric collar for secure shaft locking. Designed for metric shafts, it has a 33.3 mm shaft height and uses M10 mounting bolts. Manufactured to ISO standards, it is suitable for supporting rotating shafts in conveyors, fans, and material handling equipment
TRITAN
This low-base pillow block ball bearing features a cast iron housing with an eccentric collar for secure shaft locking. Designed for metric shafts, it has a 33.3 mm shaft height and uses M10 mounting bolts. Manufactured to ISO standards, it is suitable for supporting rotating shafts in conveyors, fans, and material handling equipment
This TRITAN low-base pillow block ball bearing features a cast iron housing with set screws for shaft retention. It has a 1-1/4 in shaft height and 5 in overall length, with M10 mounting bolts. Designed to AFBMA standards, it supports rotating shafts in conveyors, industrial machinery, and material handling equipment for moderate-load applications
TRITAN
This TRITAN low-base pillow block ball bearing features a cast iron housing with set screws for shaft retention. It has a 1-1/4 in shaft height and 5 in overall length, with M10 mounting bolts. Designed to AFBMA standards, it supports rotating shafts in conveyors, industrial machinery, and material handling equipment for moderate-load applications
TRITAN Pillow Block Bearing: 20 mm Bore, Cast Iron, Set Screws, 31.7 mm Shaft Ht, 127 mm Overall Lg (MPN HCPK204-12)
TRITAN
TRITAN Pillow Block Bearing: 20 mm Bore, Cast Iron, Set Screws, 31.7 mm Shaft Ht, 127 mm Overall Lg (MPN HCPK204-12)
Cast iron housing with set-screw locking for shaft retention. Bore 1 1/4 in, shaft height 1 51/64 in, mounting bolt size M12. Manufactured to AFBMA standards. Supports rotating shafts in conveyors, fans, and pumps
TRITAN
Cast iron housing with set-screw locking for shaft retention. Bore 1 1/4 in, shaft height 1 51/64 in, mounting bolt size M12. Manufactured to AFBMA standards. Supports rotating shafts in conveyors, fans, and pumps
TRITAN Pillow Block Bearing: 1 1/2 in Bore, Cast Iron, Eccentric Collar, 1 59/64 in Shaft Ht (MPN HCPK208-24)
TRITAN
TRITAN Pillow Block Bearing: 1 1/2 in Bore, Cast Iron, Eccentric Collar, 1 59/64 in Shaft Ht (MPN HCPK208-24)
Cast iron low-base pillow block ball bearing with set screw locking for shaft retention. Bore 1 in, shaft height 1 27/64 in, mounting bolt size M10. Rated for temperatures up to 250°F. Meets AFBMA standards. Suitable for supporting rotating shafts in conveyors, fans, and pumps
TRITAN
Cast iron low-base pillow block ball bearing with set screw locking for shaft retention. Bore 1 in, shaft height 1 27/64 in, mounting bolt size M10. Rated for temperatures up to 250°F. Meets AFBMA standards. Suitable for supporting rotating shafts in conveyors, fans, and pumps
TRITAN Pillow Block Bearing: 1 15/16 in Bore, Cast Iron, Eccentric Collar, 2 3/16 in Shaft Ht (MPN HCPK210-31)
TRITAN
TRITAN Pillow Block Bearing: 1 15/16 in Bore, Cast Iron, Eccentric Collar, 2 3/16 in Shaft Ht (MPN HCPK210-31)
This low-base pillow block ball bearing features a cast iron housing with an eccentric collar for secure shaft mounting and alignment. It has a 1 19/64 in shaft height and a 5/8 in mounting bolt size, conforming to ISO standards. Suitable for supporting rotating shafts in industrial machinery such as conveyors, fans, and pumps
TRITAN
This low-base pillow block ball bearing features a cast iron housing with an eccentric collar for secure shaft mounting and alignment. It has a 1 19/64 in shaft height and a 5/8 in mounting bolt size, conforming to ISO standards. Suitable for supporting rotating shafts in industrial machinery such as conveyors, fans, and pumps