Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
TUBOLIT Polyethylene Straight Tube Insulation
TUBOLITPolyethylene Straight Tube Insulation

TUBOLIT Polyethylene Straight Tube Insulation

TUBOLIT Pipe Insulation: Polyethylene adalah insulasi pipa berbahan polietilena tipe straight tube yang dirancang untuk aplikasi isolasi termal pada sistem perpipaan industri. Produk ini memiliki ketebalan 1 in…

SKU 3G-OTH-742051

Juga terdaftar sebagai: DGT 11810 · DGT-11810

Merek
TUBOLIT
Item
Polyethylene Straight Tube Insulation
Part Number
DGT11810
Kategori
Polyethylene Straight Tube Insulation
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Required — additional freight charges may applyThis item requires special shipping, additional charges may apply.

Spesifikasi Teknis

TUBOLIT
Manufacturer Part Number
DGT11810
Type
Semi-Slit, Black/Gray
Lg
6 ft
ID
1 1/8 in
Form
Tube
Color
Black/Gray
Thick
1 in
Density
1.15 lb/cu ft
K Value
0.270 BTU @ 75°F
R-Value
6.3
Features
Acceptable for Use with Heat Tracing/Heat Tape; Low Thermal Conductivity
Thickness
1 in Thickness The thickness of the insulation measured in inches. In general, the thicker the insulation, the greater the insulation effectiveness and the higher the R-value.
Flexibility
Flexible
Catalog Page
N/A
Size (W X L)
6 ft
Plenum Rating
Plenum Rated Plenum Rating The insulation meets building codes that require all materials installed in an air-filled space to have fire and smoke-inhibiting qualities.
Foam Cell Type
Closed Foam Cell Type The cell structure of the foam insulation.
Overall Length
6 ft
Sealing Method
Contact Adhesive
Inside Diameter
1-1/8 in Inside Diameter
Outside Diameter
82-3/10 mm
Country of Origin
USA (subject to change)
For Piping System
Chilled Water; Hot Water
Flame Spread Index
25
Installation Style
Semi-Slit Installation Style The way in which the insulation closes around the pipe or tube.
Insulation R-Value
6.3 Insulation R-Value Insulation effectiveness is measured by an R-value based on the density and cell structure of the foam. The higher the R-value, the more effective the insulation.
Insulation Material
Polyethylene
Product Description
Polyethylene foam rubber insulation tubes cover a length of straight pipe or tubing. This insulation is factory cut-to-length and preformed to save fabrication time in the field.
Smoke Developed Index
50
Water Vapor Absorption
0.2%
Water Vapor Permeability
0.02 perm-in
Outdoor Weather Protection
Painting with WB Finish; Protective Jacket
Maximum Operating Temperature
200 °F
Minimum Operating Temperature
-297 °F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

TUBOLIT Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

TUBOLIT Pipe Insulation: Polyethylene adalah insulasi pipa berbahan polietilena tipe straight tube yang dirancang untuk aplikasi isolasi termal pada sistem perpipaan industri. Produk ini memiliki ketebalan 1 in, panjang 6 ft, dan diameter dalam 1 1/8 in, dengan R-Value 6.3 serta rating plenum (Plenum Rated) untuk keamanan instalasi. Tersedia dalam varian Semi-Slit dengan warna Black/Gray, insulasi ini cocok digunakan pada sistem HVAC, pendingin, dan perpipaan yang memerlukan efisiensi energi tinggi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa TUBOLIT Pipe Insulation: Polyethylene digunakan?

TUBOLIT Pipe Insulation: Polyethylene digunakan sebagai isolasi termal pada pipa sistem HVAC, pendingin, dan perpipaan industri untuk mengurangi kehilangan panas atau kondensasi. Dengan R-Value 6.3 dan rating plenum, produk ini cocok untuk instalasi di area plenum yang memerlukan standar keamanan tinggi.

Apa spesifikasi TUBOLIT Pipe Insulation: Polyethylene Straight Tube?

Spesifikasi produk ini meliputi diameter dalam 1 1/8 in, panjang 6 ft, ketebalan 1 in, R-Value 6.3, tipe Semi-Slit dengan warna Black/Gray, dan rating Plenum Rated. Material polietilena ini dirancang untuk isolasi pipa yang efisien dan tahan lama.

Di mana beli TUBOLIT Pipe Insulation: Polyethylene di Indonesia?

Anda dapat membeli TUBOLIT Pipe Insulation: Polyethylene melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk informasi lebih lanjut.

Bagaimana cara memilih TUBOLIT Pipe Insulation yang tepat?

Pilih TUBOLIT Pipe Insulation berdasarkan diameter pipa Anda, misalnya ID 1 1/8 in, dan ketebalan yang sesuai seperti 1 in. Pastikan R-Value 6.3 memenuhi kebutuhan isolasi termal Anda. Untuk aplikasi plenum, pilih varian Plenum Rated seperti produk ini.

Not sure this is the right part? Photo-identify it→

TUBOLIT Produk

3G Electric memasok TUBOLIT polyethylene straight tube insulation. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari TUBOLIT

Lihat semua TUBOLIT suku cadang →
Semi-slit polyethylene pipe insulation for reducing heat loss or gain on plumbing and HVAC pipes. The 2 in ID fits standard pipes; 1 in thickness provides R-Value 5.4. Plenum rated for use in air-handling spaces such as drop ceilings and mechanical rooms. Black finish, 6 ft length
TUBOLIT
Semi-slit polyethylene pipe insulation for reducing heat loss or gain on plumbing and HVAC pipes. The 2 in ID fits standard pipes; 1 in thickness provides R-Value 5.4. Plenum rated for use in air-handling spaces such as drop ceilings and mechanical rooms. Black finish, 6 ft length
Polyethylene straight tube insulation with a slit-and-adhesive closure for easy installation on existing pipes. Designed to reduce heat loss and prevent condensation on plumbing and HVAC lines. Features a 1-5/8 in inner diameter, 3/8 in thickness, 6 ft length, and R-Value of 1.8. Plenum rated for use in air-handling spaces
TUBOLIT
Polyethylene straight tube insulation with a slit-and-adhesive closure for easy installation on existing pipes. Designed to reduce heat loss and prevent condensation on plumbing and HVAC lines. Features a 1-5/8 in inner diameter, 3/8 in thickness, 6 ft length, and R-Value of 1.8. Plenum rated for use in air-handling spaces
This semi-slit polyethylene tube insulation is designed for thermal insulation of pipes in HVAC and plumbing systems. With a 2-inch inner diameter and 1/2-inch thickness, it fits standard pipes and provides an R-value of 2.5. The plenum rating allows use in air-handling spaces. The 6-foot length and slit design facilitate installation on existing lines
TUBOLIT
This semi-slit polyethylene tube insulation is designed for thermal insulation of pipes in HVAC and plumbing systems. With a 2-inch inner diameter and 1/2-inch thickness, it fits standard pipes and provides an R-value of 2.5. The plenum rating allows use in air-handling spaces. The 6-foot length and slit design facilitate installation on existing lines
Semi-slit polyethylene tube insulation for pipes. Features a 2 3/8 in inner diameter, 1 in thickness, and 6 ft length. Provides an R-Value of 5.2. Plenum rated for use in air-handling spaces. Suitable for insulating pipes in HVAC, plumbing, and industrial systems to reduce heat loss and prevent condensation
TUBOLIT
Semi-slit polyethylene tube insulation for pipes. Features a 2 3/8 in inner diameter, 1 in thickness, and 6 ft length. Provides an R-Value of 5.2. Plenum rated for use in air-handling spaces. Suitable for insulating pipes in HVAC, plumbing, and industrial systems to reduce heat loss and prevent condensation
Polyethylene straight tube insulation with semi-slit design for easy installation over 7/8 in OD pipes. Provides thermal insulation with R-Value of 3. Plenum rated for use in air-handling spaces where fire safety codes require low flame-spread materials. Suitable for industrial piping systems requiring thermal efficiency
TUBOLIT
Polyethylene straight tube insulation with semi-slit design for easy installation over 7/8 in OD pipes. Provides thermal insulation with R-Value of 3. Plenum rated for use in air-handling spaces where fire safety codes require low flame-spread materials. Suitable for industrial piping systems requiring thermal efficiency
Semi-slit polyethylene pipe insulation with 1 in thickness, 1 5/8 in inner diameter, and 6 ft length. Provides an R-Value of 5.9 and is plenum rated for use in air-handling spaces. Suitable for thermal insulation and condensation control on piping in HVAC, plumbing, and refrigeration systems
TUBOLIT
Semi-slit polyethylene pipe insulation with 1 in thickness, 1 5/8 in inner diameter, and 6 ft length. Provides an R-Value of 5.9 and is plenum rated for use in air-handling spaces. Suitable for thermal insulation and condensation control on piping in HVAC, plumbing, and refrigeration systems
Polyethylene straight tube insulation with a slit and adhesive closure. Designed for insulating pipes in HVAC and plumbing systems, it helps reduce heat loss, prevent condensation, and provide sound dampening. Plenum rated for use in air-handling spaces. Specifications: 2 in ID, 1 in thickness, 6 ft length, R-Value 5.5, black
TUBOLIT
Polyethylene straight tube insulation with a slit and adhesive closure. Designed for insulating pipes in HVAC and plumbing systems, it helps reduce heat loss, prevent condensation, and provide sound dampening. Plenum rated for use in air-handling spaces. Specifications: 2 in ID, 1 in thickness, 6 ft length, R-Value 5.5, black
Polyethylene straight tube insulation with slit and adhesive closure for easy installation on existing pipes. Designed to reduce heat loss or gain on plumbing and HVAC lines. Plenum rated for use in air-handling spaces such as ductwork plenums and mechanical rooms
TUBOLIT
Polyethylene straight tube insulation with slit and adhesive closure for easy installation on existing pipes. Designed to reduce heat loss or gain on plumbing and HVAC lines. Plenum rated for use in air-handling spaces such as ductwork plenums and mechanical rooms

Ulasan pelanggan

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first