TWECO Conduit Liner: 0.045 in x 15 ft, Steel
The TWECO Conduit Liner (MPN 14201141) is a steel liner for Tweco MIG Guns, part of Liner Series 42 and Model 42-4045-15. It measures 0.045 in x 15 ft.
SKU 3G-OTH-357691
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TWECO Conduit Liner (MPN 14201141) is a steel liner for Tweco MIG Guns, part of Liner Series 42 and Model 42-4045-15. It measures 0.045 in x 15 ft.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TWECO Conduit Liner 14201141 used for?
The TWECO Conduit Liner 14201141 is a steel liner designed for Tweco MIG Guns. It guides welding wire from the feeder to the gun, ensuring smooth wire delivery during MIG welding. This liner is suitable for industrial fabrication, automotive repair, and general metalworking applications where consistent wire feed is critical.
What are the specifications of the TWECO Conduit Liner 14201141?
The TWECO Conduit Liner 14201141 is a steel liner from Liner Series 42, Model 42-4045-15. It measures 0.045 in diameter and 15 ft in length. The manufacturer part number is 14201141. This liner is designed for use with Tweco MIG Guns to deliver welding wire reliably.
Where to buy the TWECO Conduit Liner 14201141 worldwide?
3G Electric supplies the TWECO Conduit Liner 14201141 worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time. We source and deliver this genuine TWECO liner to support your welding operations.
How to install the TWECO Conduit Liner 14201141?
To install the TWECO Conduit Liner 14201141, first disconnect the MIG gun from the welder. Remove the old liner by pulling it out from the gun end. Insert the new steel liner through the gun cable, ensuring it seats fully at both ends. Trim any excess length if needed, then reconnect the gun and test wire feed.
Digunakan dalam
Aplikasi umum untuk TWECOTWECO Produk
3G Electric memasok TWECO liners for tweco mig guns. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
