UHMW Polyethylene Bar: 0.125 in Thick, 1 in x 24 in, Opaque, White
The UHMW Polyethylene Bar (0.125 in Thick, 1 in x 24 in, Opaque, White) is an acrylic adhesive backed UHMW polyethylene sheet/bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN…
SKU 3G-OTH-592443
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The UHMW Polyethylene Bar (0.125 in Thick, 1 in x 24 in, Opaque, White) is an acrylic adhesive backed UHMW polyethylene sheet/bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-599).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is UHMW polyethylene bar used for?
UHMW polyethylene bar is used for wear strips, chute liners, conveyor guides, and material-handling components where low friction and high impact resistance are needed. Its acrylic adhesive backing simplifies installation on flat surfaces in industrial machinery, packaging lines, and food-processing equipment.
What are the specifications of UHMW polyethylene bar 0.125 in thick?
This UHMW polyethylene bar is 0.125 in thick, 1 in x 24 in, opaque white, with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in. It features an acrylic adhesive backing for easy mounting. The manufacturer part number is BULK-PS-UHMW-599.
Where to buy UHMW polyethylene bar with adhesive backing worldwide?
3G Electric supplies and delivers UHMW polyethylene bar with acrylic adhesive backing worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, regardless of location. Contact us for availability and lead time.
How to install UHMW polyethylene bar with acrylic adhesive?
Clean the mounting surface thoroughly to remove grease and debris. Peel the release liner from the acrylic adhesive backing, press the UHMW bar firmly into place, and apply even pressure for several seconds. For best adhesion, install at temperatures above 50 °F and allow 24 hours for full bond strength.
UHMW Produk
3G Electric memasok UHMW acrylic adhesive backed uhmw polyethylene sheets & bars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
