UHMW Polyethylene Bar: 0.25 in Thick, 0.5 in x 12 in, Opaque, White
3G Electric supplies the UHMW Polyethylene Bar (0.25 in Thick, 0.5 in x 12 in, Opaque, White) with an Acrylic Adhesive backing, offering 4,400 psi tensile strength and 16.0 ft-lb/in impact strength (MPN…
SKU 3G-OTH-592460
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
3G Electric supplies the UHMW Polyethylene Bar (0.25 in Thick, 0.5 in x 12 in, Opaque, White) with an Acrylic Adhesive backing, offering 4,400 psi tensile strength and 16.0 ft-lb/in impact strength (MPN BULK-PS-UHMW-658). We interpret demand and source this genuine industrial material across 14 departments—with specialist depth in combustion, pumps, and controls—ensuring you get the right solution, not just a catalog.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is UHMW Polyethylene Bar with acrylic adhesive used for?
This UHMW Polyethylene Bar (0.25 in thick, 0.5 in x 12 in, opaque white) is used as a wear-resistant liner or guide in material handling, conveyor systems, and chute linings. The acrylic adhesive backing simplifies installation on clean surfaces, reducing downtime in industrial machinery.
What are the specifications of the UHMW Polyethylene Bar (MPN BULK-PS-UHMW-658)?
This bar has a tensile strength of 4,400 psi and an impact strength of 16.0 ft-lb/in. It is 0.25 in thick, 0.5 in x 12 in, opaque white, with an acrylic adhesive backing. The manufacturer part number is BULK-PS-UHMW-658.
Where to buy UHMW Polyethylene Bar with acrylic adhesive worldwide?
3G Electric supplies this UHMW Polyethylene Bar (MPN BULK-PS-UHMW-658) worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine materials across 14 departments, including specialist expertise in combustion, pumps, and controls.
How to install UHMW Polyethylene Bar with acrylic adhesive?
Clean the mounting surface thoroughly to remove grease and dust. Peel the release liner from the acrylic adhesive backing, press the bar firmly into place, and apply even pressure for 30 seconds. For best adhesion, install at temperatures above 50 °F and avoid immediate heavy loading.
UHMW Produk
3G Electric memasok UHMW acrylic adhesive backed uhmw polyethylene sheets & bars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
