UHMW Polyethylene Bar: 0.25 in Thick, 1.5 in x 4 ft, Opaque, White
The UHMW Polyethylene Bar (0.25 in Thick, 1.5 in x 4 ft, Opaque, White) is an acrylic adhesive backed UHMW polyethylene sheet/bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN…
SKU 3G-OTH-592449
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The UHMW Polyethylene Bar (0.25 in Thick, 1.5 in x 4 ft, Opaque, White) is an acrylic adhesive backed UHMW polyethylene sheet/bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-669). 3G Electric interprets demand and supplies this product across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is UHMW Polyethylene Bar with acrylic adhesive backing used for?
This UHMW Polyethylene Bar (0.25 in thick, 1.5 in x 4 ft) with acrylic adhesive backing is used for wear strips, chute liners, and conveyor guides in material handling and packaging industries. Its low friction and high impact resistance (16.0 ft-lb/in) reduce wear on equipment.
What are the specifications of UHMW Polyethylene Bar BULK-PS-UHMW-669?
The UHMW Polyethylene Bar (MPN BULK-PS-UHMW-669) is 0.25 in thick, 1.5 in x 4 ft, opaque white. It has a tensile strength of 4,400 psi, impact strength of 16.0 ft-lb/in, and acrylic adhesive backing for easy installation.
Where to buy UHMW Polyethylene Bar with adhesive backing worldwide?
3G Electric supplies this UHMW Polyethylene Bar (BULK-PS-UHMW-669) worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source across 14 departments including material handling and machining.
How to install UHMW Polyethylene Bar with acrylic adhesive backing?
Clean the surface thoroughly, remove the acrylic adhesive liner, and press the UHMW bar firmly into place. Ensure the substrate is dry and free of oil or dust. For best adhesion, apply pressure evenly and allow 24 hours for full bond strength.
UHMW Produk
3G Electric memasok UHMW acrylic adhesive backed uhmw polyethylene sheets & bars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
