UHMW Polyethylene Bar: 0.25 in Thick, 4 in x 24 in, Opaque, White
The UHMW Polyethylene Bar (0.25 in Thick, 4 in x 24 in, Opaque, White) is an acrylic adhesive backed sheet/bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-677). 3G…
SKU 3G-OTH-592462
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The UHMW Polyethylene Bar (0.25 in Thick, 4 in x 24 in, Opaque, White) is an acrylic adhesive backed sheet/bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-677). 3G Electric interprets demand and delivers this genuine industrial material across 14 departments — with specialist depth in combustion, pumps and controls as an authorised distributor — ensuring you get the right answer, not just a catalog.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is UHMW Polyethylene Bar with acrylic adhesive backing used for?
This UHMW Polyethylene Bar (0.25 in thick, 4 in x 24 in) with acrylic adhesive backing is used for wear strips, chute liners, and conveyor guides in material handling and packaging industries. Its high impact strength (16.0 ft-lb/in) and low friction reduce wear on equipment.
What are the specifications of UHMW Polyethylene Bar BULK-PS-UHMW-677?
The UHMW Polyethylene Bar (MPN BULK-PS-UHMW-677) is 0.25 in thick, 4 in x 24 in, opaque white. It has a tensile strength of 4,400 psi, impact strength of 16.0 ft-lb/in, and an acrylic adhesive backing for easy installation.
Where to buy UHMW Polyethylene Bar in worldwide?
3G Electric supplies and delivers this UHMW Polyethylene Bar (BULK-PS-UHMW-677) to worldwide locations. We handle full logistics and customs clearance as a global industrial solutions provider, ensuring you get the right material for your application.
How to install UHMW Polyethylene Bar with acrylic adhesive backing?
Clean the surface thoroughly, remove the liner from the acrylic adhesive backing, and press the UHMW bar firmly into place. For best adhesion, apply pressure evenly and allow 24 hours cure time at room temperature before exposing to load.
UHMW Produk
3G Electric memasok UHMW acrylic adhesive backed uhmw polyethylene sheets & bars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
