UHMW Polyethylene Bar: 0.5 in Thick, 1.5 in x 4 ft, Opaque, White
The UHMW Polyethylene Bar (0.5 in Thick, 1.5 in x 4 ft, Opaque, White) is an acrylic adhesive backed UHMW sheet/bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-778). 3G…
SKU 3G-OTH-592479
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The UHMW Polyethylene Bar (0.5 in Thick, 1.5 in x 4 ft, Opaque, White) is an acrylic adhesive backed UHMW sheet/bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-778). 3G Electric interprets demand and delivers this genuine industrial part across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is UHMW Polyethylene Bar with acrylic adhesive used for?
This UHMW Polyethylene Bar (0.5 in thick, 1.5 in x 4 ft) with acrylic adhesive backing is used for wear strips, chute liners, and conveyor guides in material handling and packaging industries. Its low friction and high impact strength (16.0 ft-lb/in) reduce noise and wear on equipment.
What are the specifications of UHMW Polyethylene Bar BULK-PS-UHMW-778?
The UHMW Polyethylene Bar (MPN BULK-PS-UHMW-778) is 0.5 in thick, 1.5 in x 4 ft, opaque white. It has a tensile strength of 4,400 psi, impact strength of 16.0 ft-lb/in, and an acrylic adhesive backing. Clarity is opaque.
Where to buy UHMW Polyethylene Bar in worldwide?
3G Electric supplies and delivers this UHMW Polyethylene Bar (BULK-PS-UHMW-778) worldwide. We handle full logistics and customs clearance for global orders. Contact us to source this genuine industrial part across 14 departments, with specialist depth in combustion, pumps and controls.
How to install UHMW Polyethylene Bar with acrylic adhesive?
Clean the surface thoroughly, remove the acrylic adhesive liner, and press the UHMW bar firmly into place. Ensure the substrate is dry and free of oil or dust. For best adhesion, apply even pressure and allow 24 hours cure time before loading.
UHMW Produk
3G Electric memasok UHMW acrylic adhesive backed uhmw polyethylene sheets & bars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
