USA INDUSTRIALS Pipe Nipple: 1 in Nominal Pipe Size, 2 1/2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FK6) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 in nominal pipe size and 2 1/2 in length. It features Male NPT x Male NPT connections, PTFE thread sealant…
SKU 3G-OTH-473268
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FK6) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 in nominal pipe size and 2 1/2 in length. It features Male NPT x Male NPT connections, PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
This galvanized steel Schedule 40 pipe nipple connects two male NPT threaded fittings in plumbing, compressed air, and low-pressure fluid systems. It is commonly used in industrial piping, water lines, and structural applications where a durable, corrosion-resistant joint is needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22335 pipe nipple?
The USA INDUSTRIALS pipe nipple has a 1 in nominal pipe size, 2 1/2 in length, Schedule 40 wall thickness, galvanized steel construction, and welded seam. It uses Male NPT x Male NPT connections with PTFE thread sealant and is rated for 125 psi @ 72°F maximum operating pressure.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples and handles full logistics, customs clearance, and delivery to worldwide destinations. As a global industrial sourcing partner, we provide genuine parts like the ZUSA-PF-22335 with reliable lead times and compliance support for international orders.
How to install a galvanized steel pipe nipple?
Apply PTFE tape or pipe dope to the male NPT threads, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section to achieve a snug seal without over-tightening. Avoid using on systems exceeding 125 psi @ 72°F to prevent joint failure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
