USA INDUSTRIALS Pipe Nipple: 4 in Nominal Pipe Size, Male NPT x Male NPT, 36 in Lg, Schedule 40
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with a 4-inch nominal pipe size, 36-inch length, and Male NPT x Male NPT connections. It features a welded construction with PTFE thread…
SKU 3G-OTH-483761
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with a 4-inch nominal pipe size, 36-inch length, and Male NPT x Male NPT connections. It features a welded construction with PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This USA INDUSTRIALS pipe nipple connects low-pressure piping systems in industrial applications such as water, air, and gas lines. Its 4-inch nominal size, 36-inch length, and Male NPT x Male NPT threads make it suitable for extending or joining pipe runs where Schedule 40 strength is sufficient.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22300 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22300 pipe nipple has a 4-inch nominal pipe size, 36-inch length, Male NPT x Male NPT connections, Schedule 40 wall thickness, welded construction, and PTFE thread sealant. Maximum operating pressure is 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-22300 or other sizes for your low-pressure piping needs.
How to install a Schedule 40 pipe nipple with PTFE sealant?
Apply pipe joint compound or PTFE tape over the factory-applied PTFE sealant for added leak protection. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final torque. Avoid overtightening to prevent thread damage or cracking.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
