USA INDUSTRIALS Pipe Nipple: 4 in Nominal Pipe Size, Male NPT x Male NPT, 10 in Lg, Schedule 40
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with a 4-inch nominal pipe size, 10-inch length, and Male NPT x Male NPT connections. It features a welded construction with PTFE thread…
SKU 3G-OTH-483763
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with a 4-inch nominal pipe size, 10-inch length, and Male NPT x Male NPT connections. It features a welded construction with PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This USA INDUSTRIALS pipe nipple connects male NPT threaded pipes in low-pressure industrial plumbing, HVAC, and material handling systems. Its 4-inch nominal size and 10-inch length suit water, air, and non-corrosive fluid lines up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22302 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22302 is a Schedule 40 welded pipe nipple with 4-inch nominal pipe size, 10-inch length, and Male NPT x Male NPT connections. It includes PTFE thread sealant and has a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine parts like the ZUSA-PF-22302 to any location, ensuring compliance with local import requirements.
How to install a Schedule 40 pipe nipple with PTFE sealant?
Apply pipe thread compound sparingly to male threads, avoiding the first thread to prevent sealant entry into the system. Hand-tighten the nipple, then use wrenches on both ends for a secure joint without over-torquing. For the USA INDUSTRIALS nipple, ensure operating pressure stays below 125 psi @ 72°F.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
