USA INDUSTRIALS Pipe Nipple: 4 in Nominal Pipe Size, Male NPT x Male NPT, 5 in Lg, Schedule 40
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with a 4-inch nominal pipe size, 5-inch length, and Male NPT x Male NPT connections. It features a welded construction with PTFE thread…
SKU 3G-OTH-483768
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with a 4-inch nominal pipe size, 5-inch length, and Male NPT x Male NPT connections. It features a welded construction with PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This 4-inch pipe nipple connects male NPT threaded pipes in low-pressure industrial plumbing, HVAC, and material handling systems. Its welded Schedule 40 construction and PTFE sealant suit water, air, and non-corrosive fluid lines up to 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22301 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22301 is a 4-inch nominal size, 5-inch long, Schedule 40 welded pipe nipple with Male NPT x Male NPT connections. It includes PTFE thread sealant and has a maximum operating pressure of 125 psi at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-22301 or similar Schedule 40 nipples for your project.
How to install a Schedule 40 pipe nipple with PTFE sealant?
Apply pipe thread compound or PTFE tape over the male threads, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex ends for final tightening—avoid overtightening to prevent cracking. Always verify pressure rating (125 psi max) before use.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
