USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, Male NPT x Male NPT, 1 1/8 in Lg
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with a 1/2 in nominal pipe size, featuring Male NPT x Male NPT connections and a 1 1/8 in length. It is welded with PTFE thread sealant and…
SKU 3G-OTH-483615
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40 low-pressure pipe nipple with a 1/2 in nominal pipe size, featuring Male NPT x Male NPT connections and a 1 1/8 in length. It is welded with PTFE thread sealant and rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This USA INDUSTRIALS pipe nipple connects two male NPT threaded fittings in low-pressure piping systems up to 125 psi @ 72°F. It is commonly used in water, air, and gas lines where a short, welded Schedule 40 nipple with PTFE thread sealant is required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22124 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22124 is a 1/2 in nominal pipe size, Schedule 40, welded pipe nipple with Male NPT x Male NPT connections, 1 1/8 in length, PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this Schedule 40 nipple with PTFE sealant to your facility, regardless of location.
How to install a USA INDUSTRIALS Schedule 40 pipe nipple?
Apply pipe thread compound or PTFE tape to the male NPT threads, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex ends for final tightening, but avoid overtightening to prevent cracking the Schedule 40 welded steel.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
