USA INDUSTRIALS Plug: 1 1/2 in, Threaded, Class 150, 150 psi @ 72°F, Plug
The USA INDUSTRIALS Low-Pressure Threaded Pipe Fitting is a 1 1/2 in, threaded, Class 150 plug made of malleable iron, rated for a maximum operating pressure of 150 psi @ 72 °F. 3G Electric interprets this demand and…
SKU 3G-OTH-478109
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Low-Pressure Threaded Pipe Fitting is a 1 1/2 in, threaded, Class 150 plug made of malleable iron, rated for a maximum operating pressure of 150 psi @ 72 °F. 3G Electric interprets this demand and sources the genuine fitting, backed by our specialist expertise in combustion, pumps and controls across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 1 1/2 in threaded plug used for?
This USA INDUSTRIALS malleable iron plug seals threaded openings in low-pressure piping systems. It is rated Class 150 with a maximum operating pressure of 150 psi @ 72 °F, commonly used in water, air, and steam lines across industrial departments.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23068 plug?
The USA INDUSTRIALS ZUSA-PF-23068 is a 1 1/2 in threaded plug, Class 150, made of malleable iron. Its maximum operating pressure is 150 psi @ 72 °F. It is a low-pressure threaded pipe fitting with thread sealant, suitable for general industrial applications.
Where to buy USA INDUSTRIALS pipe fittings worldwide?
3G Electric supplies USA INDUSTRIALS pipe fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine parts like the ZUSA-PF-23068 plug and support across 14 departments including combustion, pumps, and controls.
How to install a threaded malleable iron plug?
Clean the male and female threads thoroughly. Apply a compatible thread sealant or PTFE tape to the plug's threads. Hand-tighten the plug into the fitting, then use a wrench for final snugging—avoid overtightening to prevent cracking the malleable iron. Test the joint at operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
