USA INDUSTRIALS Cap: 3/4 in, Threaded, Class 150, 150 psi @ 72°F, Cap
The USA INDUSTRIALS Cap is a 3/4 in, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for 150 psi at 72°F. This cap is part of our threaded pipe fittings category, supplied with thread…
SKU 3G-OTH-478174
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Cap is a 3/4 in, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for 150 psi at 72°F. This cap is part of our threaded pipe fittings category, supplied with thread sealant for secure installation.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 3/4 in threaded pipe cap used for?
This malleable iron cap seals the end of a 3/4 in threaded pipe in low-pressure systems up to 150 psi at 72°F. It is commonly used in water, air, and steam lines across industrial plumbing, HVAC, and process piping applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23056 cap?
The USA INDUSTRIALS cap has a 3/4 in threaded connection, Class 150 rating, and a maximum operating pressure of 150 psi at 72°F. It is made of malleable iron and supplied with thread sealant for a leak-tight joint.
Where to buy USA INDUSTRIALS pipe fittings in worldwide?
3G Electric supplies USA INDUSTRIALS pipe fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on the ZUSA-PF-23056 cap or any threaded fitting in your system.
How to install a threaded pipe cap with thread sealant?
Clean the male pipe threads, apply the supplied thread sealant evenly, then hand-tighten the cap. Use a wrench for an additional 1–2 turns to achieve a secure seal without over-tightening. Test the joint at operating pressure before putting the line into service.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
