USA INDUSTRIALS Metal Pipe Tee: Tee, 3/4 in x 1/4 in x 3/4 in, Class 125
The USA INDUSTRIALS Metal Pipe Tee is a chrome-plated threaded low-pressure pipe fitting, type 3/4 in x 1/4 in x 3/4 in, Class 125, made from C89833 brass. It has a maximum operating pressure of 125 psi @ 72 °F.
SKU 3G-OTH-458331
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Metal Pipe Tee is a chrome-plated threaded low-pressure pipe fitting, type 3/4 in x 1/4 in x 3/4 in, Class 125, made from C89833 brass. It has a maximum operating pressure of 125 psi @ 72 °F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Metal Pipe Tee used for?
This chrome-plated brass tee connects three pipes in low-pressure plumbing, HVAC, or gas systems. Its 3/4 in x 1/4 in x 3/4 in configuration allows branch-line takeoffs from a main run, common in commercial and industrial water or air distribution.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22711 pipe tee?
The USA INDUSTRIALS ZUSA-PF-22711 is a Class 125 threaded tee with a 3/4 in x 1/4 in x 3/4 in size. It is made of chrome-plated C89833 brass and has a maximum operating pressure of 125 psi @ 72 °F. The part number is ZUSA-PF-22711.
Where to buy USA INDUSTRIALS pipe fittings worldwide?
3G Electric supplies USA INDUSTRIALS pipe fittings like the ZUSA-PF-22711 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this chrome-plated brass tee or other industrial fittings.
How to install a chrome-plated brass pipe tee?
Apply thread sealant to male NPT threads and hand-tighten the tee into the run pipe, then align the branch outlet. Use two wrenches—one on the tee body, one on the pipe—to avoid over-torquing. Do not exceed 125 psi @ 72 °F operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS chrome-plated threaded low-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
