USA INDUSTRIALS Metal Pipe Elbow: 45° Elbow, 1/2 in x 1/2 in, Class 125
The USA INDUSTRIALS Metal Pipe Elbow is a 45° elbow, a chrome-plated threaded low-pressure pipe fitting. It is a 1/2 in x 1/2 in, Class 125 fitting made from C89833 brass, with a maximum operating pressure of 125 psi.
SKU 3G-OTH-458340
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Metal Pipe Elbow is a 45° elbow, a chrome-plated threaded low-pressure pipe fitting. It is a 1/2 in x 1/2 in, Class 125 fitting made from C89833 brass, with a maximum operating pressure of 125 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 45° metal pipe elbow used for?
This 45° elbow changes the direction of piping in low-pressure systems. It is commonly used in plumbing, HVAC, and industrial fluid handling where a gradual turn is needed. The chrome-plated C89833 brass construction resists corrosion in water and air applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22702 pipe elbow?
This is a 45° elbow with 1/2 in x 1/2 in female threaded connections. It is rated Class 125 with a maximum operating pressure of 125 psi. The fitting is made from chrome-plated C89833 brass, offering durability in low-pressure environments.
Where to buy USA INDUSTRIALS pipe fittings worldwide?
3G Electric supplies USA INDUSTRIALS pipe fittings to customers worldwide. We handle full logistics, customs clearance, and delivery for global orders. Contact our team to source this chrome-plated brass elbow or any other industrial fitting you need.
How to install a threaded brass pipe elbow?
Apply thread sealant or PTFE tape to the male pipe threads. Hand-tighten the elbow onto the pipe, then use a wrench for an additional 1-2 turns. Avoid overtightening to prevent cracking the brass. Always verify the system pressure does not exceed 125 psi.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS chrome-plated threaded low-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
