USA INDUSTRIALS Metal Pipe Elbow: 90° Elbow, 1/8 in x 1/8 in, Class 125
The USA INDUSTRIALS Metal Pipe Elbow is a 90° elbow, a chrome-plated threaded low-pressure pipe fitting. It is a 1/8 in x 1/8 in, Class 125 fitting made from C89833 brass, with a maximum operating pressure of 125 psi.
SKU 3G-OTH-458352
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Metal Pipe Elbow is a 90° elbow, a chrome-plated threaded low-pressure pipe fitting. It is a 1/8 in x 1/8 in, Class 125 fitting made from C89833 brass, with a maximum operating pressure of 125 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 90° pipe elbow used for?
This chrome-plated brass 90° elbow connects two pipes at a right angle in low-pressure plumbing, instrumentation, or HVAC systems. It is suitable for applications up to 125 psi, such as water or air lines, where a corrosion-resistant, decorative finish is needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22690 elbow?
This is a 1/8 in x 1/8 in, Class 125, 90° elbow made from chrome-plated C89833 brass. It has a maximum operating pressure of 125 psi and is manufactured by USA INDUSTRIALS under part number ZUSA-PF-22690.
Where to buy USA INDUSTRIALS pipe fittings worldwide?
3G Electric supplies and delivers USA INDUSTRIALS chrome-plated brass elbows to customers worldwide. We handle full logistics and customs clearance, ensuring you receive genuine industrial fittings like the ZUSA-PF-22690 for your low-pressure piping needs.
How to install a chrome-plated brass 90° elbow?
Apply thread sealant to the male threads and hand-tighten the elbow onto the pipe, then use a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent cracking the chrome plating. Always verify the system pressure does not exceed 125 psi.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS chrome-plated threaded low-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
