USA INDUSTRIALS Plastic Welding Rod: LDPE, Round, 1/8 in x 3,150 ft, Off-White
USA INDUSTRIALS LDPE Welding Rods are round, off-white plastic welding rods measuring 1/8 in x 3,150 ft and weighing 15 lb (MPN BULK-WR-LDPE-4). These LDPE rods are designed for plastic welding applications.
SKU 3G-OTH-367242
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
USA INDUSTRIALS LDPE Welding Rods are round, off-white plastic welding rods measuring 1/8 in x 3,150 ft and weighing 15 lb (MPN BULK-WR-LDPE-4). These LDPE rods are designed for plastic welding applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is USA INDUSTRIALS LDPE plastic welding rod used for?
This LDPE welding rod is used for repairing or fabricating low-density polyethylene tanks, pipes, liners, and chemical containers. It is commonly applied in chemical processing, water treatment, and industrial storage applications where corrosion resistance and weld strength are required.
What are the specifications of USA INDUSTRIALS BULK-WR-LDPE-4?
This welding rod is round, 1/8 inch diameter, 3,150 feet long, off-white color, and weighs 15 lb. It is made from LDPE material and manufactured by USA INDUSTRIALS under MPN BULK-WR-LDPE-4. The rod is designed for hot-air or extrusion welding of LDPE substrates.
Where to buy USA INDUSTRIALS LDPE welding rod in worldwide?
3G Electric supplies USA INDUSTRIALS LDPE welding rods worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this MPN BULK-WR-LDPE-4.
How to weld with USA INDUSTRIALS LDPE plastic welding rod?
Clean the joint area and preheat the LDPE base material to about 300 °C. Use a hot-air welder set to 350 °C and feed the rod at a 90° angle while applying steady pressure. Allow the weld to cool slowly for maximum bond strength. Always follow the welder manufacturer's instructions.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS ldpe welding rods. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
