Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Flensa Pipa Logam USA INDUSTRIALS: Datar, Diameter Luar Flensa 11 in, Kelas 125 - Class 125 Slip-On Flanges
USA INDUSTRIALSClass 125 Slip-On Flanges

Flensa Pipa Logam USA INDUSTRIALS: Datar, Diameter Luar Flensa 11 in, Kelas 125

USA INDUSTRIALS menghadirkan Metal Pipe Flange tipe Flat dengan model Slip-On Flange, dirancang sesuai standar ANSI/ASME B16.1 untuk aplikasi perpipaan industri. Flange ini memiliki diameter luar 11 in, 8 lubang…

SKU 3G-OTH-650624

Juga terdaftar sebagai: BULKPF845 · BULK PF 845

Merek
USA INDUSTRIALS
Item
Flensa Pipa Logam USA INDUSTRIALS: Datar, Diameter Luar Flensa 11 in, Kelas 125
Kategori
Class 125 Slip-On Flanges
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

USA INDUSTRIALS
Manufacturer Part Number
BULK-PF-845
Type
Class 125
Standards
ANSI/ASME B16.1
Bolt Holes
8
Flange Outside Dia
11 in
Maximum Operating Pressure
125 psi @ 72 °F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

USA INDUSTRIALS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

USA INDUSTRIALS menghadirkan Metal Pipe Flange tipe Flat dengan model Slip-On Flange, dirancang sesuai standar ANSI/ASME B16.1 untuk aplikasi perpipaan industri. Flange ini memiliki diameter luar 11 in, 8 lubang baut, dan kelas 125 dengan tekanan operasi maksimum 125 psi pada suhu 72 °F. Produk ini cocok digunakan sebagai komponen sambungan pipa pada sistem perpipaan bertekanan rendah hingga menengah di berbagai sektor industri di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi flange USA INDUSTRIALS ini?

Flange ini adalah tipe Slip-On Flat dengan standar ANSI/ASME B16.1, kelas 125. Diameter luar flange 11 in, memiliki 8 lubang baut, dan tekanan operasi maksimum 125 psi pada suhu 72 °F. Nomor komponen: BULK-PF-845.

Untuk apa flange ini digunakan?

Flange ini digunakan sebagai komponen sambungan pada sistem perpipaan industri, khususnya untuk menyambung pipa dengan metode slip-on. Cocok untuk aplikasi bertekanan rendah hingga menengah, seperti pada instalasi air, uap, atau minyak di pabrik.

Di mana beli flange USA INDUSTRIALS di Indonesia?

Anda dapat membeli flange USA INDUSTRIALS ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan langsung ke Indonesia. Kami menangani logistik dan bea cukai sehingga produk tiba di lokasi Anda tanpa repot. Hubungi kami untuk minta penawaran.

Bagaimana cara memilih flange yang tepat untuk sistem perpipaan saya?

Pilih flange berdasarkan kelas tekanan (Class 125), standar (ANSI/ASME B16.1), diameter luar (11 in), dan jumlah lubang baut (8). Pastikan flange sesuai dengan ukuran pipa dan tekanan operasi sistem Anda, maksimum 125 psi pada 72 °F.

Digunakan dalam

Aplikasi umum untuk USA INDUSTRIALS
Chemical processing — USA INDUSTRIALS FEP-encapsulated silicone cam-and-groove gaskets for corrosion-resistant sealing in coupling systems.
Food and beverage — USA INDUSTRIALS food-grade FKM cam-and-groove gaskets for sanitary fluid transfer in processing lines.
Water treatment — USA INDUSTRIALS 304 stainless steel gate valves for isolation in piping systems handling non-potable water.
Oil and gas — USA INDUSTRIALS brass ball valves for manual shut-off in low-pressure gas or fluid lines.
Pharmaceutical manufacturing — USA INDUSTRIALS 316 stainless steel globe valves for precise flow control in clean-room environments.
General industrial MRO — USA INDUSTRIALS polypropylene cam-and-groove fittings for temporary hose connections in plant maintenance.

USA INDUSTRIALS Produk

3G Electric memasok USA INDUSTRIALS class 125 slip-on flanges. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari USA INDUSTRIALS

Lihat semua USA INDUSTRIALS suku cadang →
This Class 125 slip-on flange has a 7 1/2 in outside diameter and 4 bolt holes. It is rated for a maximum operating pressure of 125 psi at 72 °F and conforms to ANSI/ASME B16.1 standards. The flange slides over the pipe and is welded inside and out for a secure joint, suitable for low-pressure water, steam, or air lines in general plant piping and HVAC systems
USA INDUSTRIALS
This Class 125 slip-on flange has a 7 1/2 in outside diameter and 4 bolt holes. It is rated for a maximum operating pressure of 125 psi at 72 °F and conforms to ANSI/ASME B16.1 standards. The flange slides over the pipe and is welded inside and out for a secure joint, suitable for low-pressure water, steam, or air lines in general plant piping and HVAC systems
This Class 125 slip-on flange has a 16 in outside diameter and 12 bolt holes, meeting ANSI/ASME B16.1 standards. It is designed for low-pressure piping systems such as water, steam, and air lines, where it slides over the pipe and is welded both inside and outside for a secure joint. Maximum operating pressure is 125 psi at 72 °F
USA INDUSTRIALS
This Class 125 slip-on flange has a 16 in outside diameter and 12 bolt holes, meeting ANSI/ASME B16.1 standards. It is designed for low-pressure piping systems such as water, steam, and air lines, where it slides over the pipe and is welded both inside and outside for a secure joint. Maximum operating pressure is 125 psi at 72 °F
Class 125 slip-on flange with 9 in outside diameter and 8 bolt holes. Manufactured to ANSI/ASME B16.1 standards. Maximum operating pressure 125 psi at 72 °F. Used to connect pipes in low-pressure water, steam, or air systems; slides over pipe and is welded both inside and out
USA INDUSTRIALS
Class 125 slip-on flange with 9 in outside diameter and 8 bolt holes. Manufactured to ANSI/ASME B16.1 standards. Maximum operating pressure 125 psi at 72 °F. Used to connect pipes in low-pressure water, steam, or air systems; slides over pipe and is welded both inside and out
This Class 125 slip-on flange has a 13 1/2 in outside diameter and 8 bolt holes, rated for 125 psi at 72 °F. Manufactured to ANSI/ASME B16.1 standards, it is used to connect pipes in low-pressure piping systems such as water, steam, or air lines. The flange slides over the pipe and is welded both inside and outside for secure attachment
USA INDUSTRIALS
This Class 125 slip-on flange has a 13 1/2 in outside diameter and 8 bolt holes, rated for 125 psi at 72 °F. Manufactured to ANSI/ASME B16.1 standards, it is used to connect pipes in low-pressure piping systems such as water, steam, or air lines. The flange slides over the pipe and is welded both inside and outside for secure attachment
This Class 125 slip-on flange has a 19 in outside diameter and 12 bolt holes, conforming to ANSI/ASME B16.1 standards. It is rated for a maximum operating pressure of 125 psi at 72 °F. Slip-on flanges are used to connect pipes, valves, and equipment in low-pressure piping systems, such as water, steam, and gas lines
USA INDUSTRIALS
This Class 125 slip-on flange has a 19 in outside diameter and 12 bolt holes, conforming to ANSI/ASME B16.1 standards. It is rated for a maximum operating pressure of 125 psi at 72 °F. Slip-on flanges are used to connect pipes, valves, and equipment in low-pressure piping systems, such as water, steam, and gas lines
This Class 125 slip-on flange is designed for low-pressure piping systems, including water, steam, and HVAC applications. It slides over the pipe and is welded both inside and out to create a secure joint. The flange has a 10 in outside diameter, 8 bolt holes, and meets ANSI/ASME B16.1 standards with a maximum operating pressure of 125 psi at 72 °F
USA INDUSTRIALS
This Class 125 slip-on flange is designed for low-pressure piping systems, including water, steam, and HVAC applications. It slides over the pipe and is welded both inside and out to create a secure joint. The flange has a 10 in outside diameter, 8 bolt holes, and meets ANSI/ASME B16.1 standards with a maximum operating pressure of 125 psi at 72 °F
This Class 125 slip-on flange has an 8 1/4 in outside diameter with 8 bolt holes, rated for 125 psi at 72 °F. It is manufactured to ANSI/ASME B16.1 standards. Used to connect pipes in low-pressure water, steam, or air systems, it slides over the pipe and is welded for a secure joint
USA INDUSTRIALS
This Class 125 slip-on flange has an 8 1/4 in outside diameter with 8 bolt holes, rated for 125 psi at 72 °F. It is manufactured to ANSI/ASME B16.1 standards. Used to connect pipes in low-pressure water, steam, or air systems, it slides over the pipe and is welded for a secure joint
This Class 125 slip-on flange has a 13 1/2 in outside diameter and 8 bolt holes. It is rated for a maximum operating pressure of 125 psi at 72 °F and conforms to ANSI/ASME B16.1 standards. The flange slides over pipe and is welded inside and outside for a secure joint, suitable for low-pressure water, steam, or air lines
USA INDUSTRIALS
This Class 125 slip-on flange has a 13 1/2 in outside diameter and 8 bolt holes. It is rated for a maximum operating pressure of 125 psi at 72 °F and conforms to ANSI/ASME B16.1 standards. The flange slides over pipe and is welded inside and outside for a secure joint, suitable for low-pressure water, steam, or air lines