Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
USA INDUSTRIALS Nipel Pipa: Ukuran Pipa Nominal 1/8 in, Male NPT x Male NPT, Panjang 12 in, Schedule 40 - Schedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant
USA INDUSTRIALSSchedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant

USA INDUSTRIALS Nipel Pipa: Ukuran Pipa Nominal 1/8 in, Male NPT x Male NPT, Panjang 12 in, Schedule 40

Pipe Nipple merek USA INDUSTRIALS ini adalah komponen perpipaan berukuran 1/8 in Nominal Pipe Size dengan panjang 12 in, dirancang untuk aplikasi tekanan rendah. Terbuat dari baja Schedule 40 yang dilas (welded)…

SKU 3G-OTH-483600

Juga terdaftar sebagai: ZUSAPF22188 · ZUSA PF 22188

Merek
USA INDUSTRIALS
Item
Nipel Pipa: Ukuran Pipa Nominal 1/8 in, Male NPT x Male NPT, Panjang 12 in, Schedule 40
Kategori
Schedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

USA INDUSTRIALS
Manufacturer Part Number
ZUSA-PF-22188
Type
Male NPT x Male NPT, Schedule 40, Welded, PTFE
Lg
12 in
Connection Type
Male NPT x Male NPT
Thread Sealant Type
PTFE
Maximum Operating Pressure
125 psi @ 72°F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

USA INDUSTRIALS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Pipe Nipple merek USA INDUSTRIALS ini adalah komponen perpipaan berukuran 1/8 in Nominal Pipe Size dengan panjang 12 in, dirancang untuk aplikasi tekanan rendah. Terbuat dari baja Schedule 40 yang dilas (welded), produk ini memiliki sambungan Male NPT x Male NPT dan telah dilapisi sealant ulir PTFE untuk mencegah kebocoran. Dengan Maximum Operating Pressure 125 psi @ 72°F, pipe nipple ini cocok digunakan sebagai sambungan peralatan industri atau sistem perpipaan bertekanan rendah.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi Pipe Nipple USA INDUSTRIALS ZUSA-PF-22188?

Pipe Nipple USA INDUSTRIALS dengan part number ZUSA-PF-22188 memiliki ukuran 1/8 in Nominal Pipe Size, panjang 12 in, tipe Male NPT x Male NPT, Schedule 40, welded, dan dilengkapi sealant ulir PTFE. Maksimum tekanan operasi adalah 125 psi @ 72°F.

Untuk apa Pipe Nipple 1/8 in Schedule 40 digunakan?

Pipe Nipple ini digunakan sebagai sambungan pendek pada sistem perpipaan bertekanan rendah, misalnya untuk menghubungkan katup, regulator, atau peralatan lain ke jalur pipa. Dengan sambungan Male NPT x Male NPT dan sealant PTFE, produk ini cocok untuk aplikasi udara, air, atau minyak ringan di lingkungan industri.

Di mana beli Pipe Nipple USA INDUSTRIALS di Indonesia?

Anda dapat membeli Pipe Nipple USA INDUSTRIALS ZUSA-PF-22188 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima barang dengan mudah.

Apa perbedaan Pipe Nipple Schedule 40 dengan Schedule 80?

Berdasarkan spesifikasi produk ini, Pipe Nipple USA INDUSTRIALS ZUSA-PF-22188 adalah Schedule 40, yang memiliki dinding lebih tipis dan tekanan maksimum lebih rendah (125 psi @ 72°F) dibandingkan Schedule 80. Schedule 80 biasanya digunakan untuk tekanan lebih tinggi, namun data spesifik tidak disertakan di sini.

Digunakan dalam

Aplikasi umum untuk USA INDUSTRIALS
Chemical processing — USA INDUSTRIALS FEP-encapsulated silicone cam-and-groove gaskets for corrosion-resistant sealing in coupling systems.
Food and beverage — USA INDUSTRIALS food-grade FKM cam-and-groove gaskets for sanitary fluid transfer in processing lines.
Water treatment — USA INDUSTRIALS 304 stainless steel gate valves for isolation in piping systems handling non-potable water.
Oil and gas — USA INDUSTRIALS brass ball valves for manual shut-off in low-pressure gas or fluid lines.
Pharmaceutical manufacturing — USA INDUSTRIALS 316 stainless steel globe valves for precise flow control in clean-room environments.
General industrial MRO — USA INDUSTRIALS polypropylene cam-and-groove fittings for temporary hose connections in plant maintenance.

USA INDUSTRIALS Produk

3G Electric memasok USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This pipe nipple is a Schedule 40 low-pressure fitting with 1 in nominal pipe size, 1 1/2 in length, and Male NPT x Male NPT connections. It features welded construction and PTFE thread sealant applied to the threads. Rated for maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil systems
USA INDUSTRIALS
This pipe nipple is a Schedule 40 low-pressure fitting with 1 in nominal pipe size, 1 1/2 in length, and Male NPT x Male NPT connections. It features welded construction and PTFE thread sealant applied to the threads. Rated for maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil systems
Male NPT x Male NPT pipe nipple with Schedule 40 wall, welded construction, and factory-applied PTFE thread sealant. Nominal pipe size 1/4 in, length 7/8 in. Maximum operating pressure 125 psi at 72°F. Suitable for connecting threaded fittings in low-pressure plumbing, pneumatic, and fluid-handling systems
USA INDUSTRIALS
Male NPT x Male NPT pipe nipple with Schedule 40 wall, welded construction, and factory-applied PTFE thread sealant. Nominal pipe size 1/4 in, length 7/8 in. Maximum operating pressure 125 psi at 72°F. Suitable for connecting threaded fittings in low-pressure plumbing, pneumatic, and fluid-handling systems
Schedule 40 welded steel pipe nipple with 3/8 in nominal size, 36 in length, and male NPT threads on both ends. Pre-applied PTFE thread sealant aids in leak prevention. Rated for 125 psi at 72°F. Used to extend or connect piping in low-pressure plumbing, air, water, and gas systems
USA INDUSTRIALS
Schedule 40 welded steel pipe nipple with 3/8 in nominal size, 36 in length, and male NPT threads on both ends. Pre-applied PTFE thread sealant aids in leak prevention. Rated for 125 psi at 72°F. Used to extend or connect piping in low-pressure plumbing, air, water, and gas systems
This Schedule 40 welded pipe nipple is 48 inches long with a 3/8 inch nominal pipe size and male NPT threads on both ends. It is pre-applied with PTFE thread sealant for leak-resistant connections in low-pressure piping systems. Suitable for water, air, and gas lines in industrial plants, HVAC systems, and process equipment where a 48-inch extension is needed. Maximum operating pressure is 125 psi at 72°F
USA INDUSTRIALS
This Schedule 40 welded pipe nipple is 48 inches long with a 3/8 inch nominal pipe size and male NPT threads on both ends. It is pre-applied with PTFE thread sealant for leak-resistant connections in low-pressure piping systems. Suitable for water, air, and gas lines in industrial plants, HVAC systems, and process equipment where a 48-inch extension is needed. Maximum operating pressure is 125 psi at 72°F
Male NPT x Male NPT pipe nipple with Schedule 40 wall thickness, welded construction, and pre-applied PTFE thread sealant. Nominal size 3/8 in, length 8 in, maximum operating pressure 125 psi at 72°F. Used for connecting threaded fittings in low-pressure water, air, and non-corrosive gas lines
USA INDUSTRIALS
Male NPT x Male NPT pipe nipple with Schedule 40 wall thickness, welded construction, and pre-applied PTFE thread sealant. Nominal size 3/8 in, length 8 in, maximum operating pressure 125 psi at 72°F. Used for connecting threaded fittings in low-pressure water, air, and non-corrosive gas lines
Schedule 40 welded pipe nipple with 1 in nominal size, 18 in length, and Male NPT x Male NPT connections. Includes PTFE thread sealant for leak-resistant joints. Rated for maximum operating pressure of 125 psi at 72°F. Suitable for low-pressure fluid or air systems in plumbing and HVAC applications
USA INDUSTRIALS
Schedule 40 welded pipe nipple with 1 in nominal size, 18 in length, and Male NPT x Male NPT connections. Includes PTFE thread sealant for leak-resistant joints. Rated for maximum operating pressure of 125 psi at 72°F. Suitable for low-pressure fluid or air systems in plumbing and HVAC applications

Lainnya dari USA INDUSTRIALS

Lihat semua USA INDUSTRIALS suku cadang →
Schedule 40 welded steel pipe nipple with male NPT threads on both ends. Pre-applied PTFE thread sealant for leak-resistant joints. Rated for 125 psi at 72°F. Used to extend or connect piping in low-pressure water, air, and gas systems
USA INDUSTRIALS
Schedule 40 welded steel pipe nipple with male NPT threads on both ends. Pre-applied PTFE thread sealant for leak-resistant joints. Rated for 125 psi at 72°F. Used to extend or connect piping in low-pressure water, air, and gas systems
This Schedule 40 welded pipe nipple features male NPT threads on both ends and is pre-applied with PTFE thread sealant for leak-resistant connections. Rated for 125 psi at 72°F, it is commonly used in low-pressure plumbing, HVAC, and industrial piping systems for water, air, and non-corrosive fluids
USA INDUSTRIALS
This Schedule 40 welded pipe nipple features male NPT threads on both ends and is pre-applied with PTFE thread sealant for leak-resistant connections. Rated for 125 psi at 72°F, it is commonly used in low-pressure plumbing, HVAC, and industrial piping systems for water, air, and non-corrosive fluids
Schedule 40 welded pipe nipple with 1 in nominal size, 4 in length, and Male NPT threads on both ends. Factory-applied PTFE thread sealant aids in creating leak-resistant joints. Maximum operating pressure 125 psi at 72°F. Suitable for low-pressure fluid or gas connections in plumbing and industrial piping systems
USA INDUSTRIALS
Schedule 40 welded pipe nipple with 1 in nominal size, 4 in length, and Male NPT threads on both ends. Factory-applied PTFE thread sealant aids in creating leak-resistant joints. Maximum operating pressure 125 psi at 72°F. Suitable for low-pressure fluid or gas connections in plumbing and industrial piping systems
This Schedule 40 welded pipe nipple has male NPT threads on both ends and a 1/2 in nominal size. It is 18 in long and includes PTFE thread sealant. Rated for 125 psi at 72°F, it is used in low-pressure water, air, and gas piping systems
USA INDUSTRIALS
This Schedule 40 welded pipe nipple has male NPT threads on both ends and a 1/2 in nominal size. It is 18 in long and includes PTFE thread sealant. Rated for 125 psi at 72°F, it is used in low-pressure water, air, and gas piping systems
Schedule 40 welded pipe nipple with 1-1/2 in nominal pipe size, 60 in length, and Male NPT x Male NPT connections. Includes PTFE thread sealant. Maximum operating pressure 125 psi at 72°F. Used in low-pressure water, air, and gas lines
USA INDUSTRIALS
Schedule 40 welded pipe nipple with 1-1/2 in nominal pipe size, 60 in length, and Male NPT x Male NPT connections. Includes PTFE thread sealant. Maximum operating pressure 125 psi at 72°F. Used in low-pressure water, air, and gas lines
Schedule 40 welded steel pipe nipple with 3/4 in nominal size, 3 in length, and male NPT threads on both ends. PTFE thread sealant applied. Rated for 125 psi maximum operating pressure at 72°F. Used for connecting threaded fittings in low-pressure plumbing, air, water, and gas systems
USA INDUSTRIALS
Schedule 40 welded steel pipe nipple with 3/4 in nominal size, 3 in length, and male NPT threads on both ends. PTFE thread sealant applied. Rated for 125 psi maximum operating pressure at 72°F. Used for connecting threaded fittings in low-pressure plumbing, air, water, and gas systems
Schedule 40 low-pressure pipe nipple with 1/2 in nominal size, 3 in length, and Male NPT threads on both ends. Welded construction with PTFE thread sealant applied. Rated for 125 psi at 72°F. Used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil lines
USA INDUSTRIALS
Schedule 40 low-pressure pipe nipple with 1/2 in nominal size, 3 in length, and Male NPT threads on both ends. Welded construction with PTFE thread sealant applied. Rated for 125 psi at 72°F. Used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil lines
This Schedule 40 welded pipe nipple is designed for low-pressure applications up to 125 psi at 72°F. It features male NPT threads on both ends and factory-applied PTFE thread sealant to facilitate leak-resistant connections. Commonly used in plumbing, pneumatic, and fluid-handling systems for joining threaded pipes
USA INDUSTRIALS
This Schedule 40 welded pipe nipple is designed for low-pressure applications up to 125 psi at 72°F. It features male NPT threads on both ends and factory-applied PTFE thread sealant to facilitate leak-resistant connections. Commonly used in plumbing, pneumatic, and fluid-handling systems for joining threaded pipes