Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
USA INDUSTRIALS Nipel Pipa: 3 in Ukuran Pipa Nominal, NPT Pria x NPT Pria, 8 in Panjang, Schedule 40 - Schedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant
USA INDUSTRIALSSchedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant

USA INDUSTRIALS Nipel Pipa: 3 in Ukuran Pipa Nominal, NPT Pria x NPT Pria, 8 in Panjang, Schedule 40

USA INDUSTRIALS menghadirkan Pipe Nipple dengan ukuran nominal 3 inci, tipe Schedule 40 Low Pressure yang dilengkapi ulir Male NPT x Male NPT dan sealant PTFE. Produk ini memiliki panjang 8 inci, dibuat dengan…

SKU 3G-OTH-483773

Juga terdaftar sebagai: ZUSAPF22256 · ZUSA PF 22256

Merek
USA INDUSTRIALS
Item
Nipel Pipa: 3 in Ukuran Pipa Nominal, NPT Pria x NPT Pria, 8 in Panjang, Schedule 40
Kategori
Schedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

USA INDUSTRIALS
Manufacturer Part Number
ZUSA-PF-22256
Type
Male NPT x Male NPT, Schedule 40, Welded, PTFE
Lg
8 in
Connection Type
Male NPT x Male NPT
Thread Sealant Type
PTFE
Maximum Operating Pressure
125 psi @ 72°F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

USA INDUSTRIALS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

USA INDUSTRIALS menghadirkan Pipe Nipple dengan ukuran nominal 3 inci, tipe Schedule 40 Low Pressure yang dilengkapi ulir Male NPT x Male NPT dan sealant PTFE. Produk ini memiliki panjang 8 inci, dibuat dengan konstruksi las (welded), dan mampu menahan tekanan operasi maksimum 125 psi pada suhu 72°F. Cocok untuk aplikasi perpipaan industri bertekanan rendah yang membutuhkan sambungan kedap bocor.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi dari Pipe Nipple USA INDUSTRIALS ukuran 3 inci?

Pipe Nipple ini memiliki ukuran nominal 3 inci, panjang 8 inci, tipe Schedule 40 dengan ulir Male NPT x Male NPT. Dilengkapi sealant PTFE, tekanan operasi maksimum 125 psi pada suhu 72°F, dan diproduksi oleh USA INDUSTRIALS dengan nomor part ZUSA-PF-22256.

Untuk apa Pipe Nipple Schedule 40 dengan sealant PTFE digunakan?

Pipe Nipple ini digunakan untuk menyambung pipa bertekanan rendah dalam sistem perpipaan industri. Sealant PTFE membantu mencegah kebocoran pada sambungan ulir, cocok untuk aplikasi yang membutuhkan ketahanan terhadap tekanan hingga 125 psi pada suhu 72°F.

Di mana beli Pipe Nipple USA INDUSTRIALS 3 inci di Indonesia?

Anda dapat membeli Pipe Nipple USA INDUSTRIALS ukuran 3 inci melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan untuk memastikan produk sampai ke lokasi Anda.

Apa perbedaan antara Pipe Nipple Schedule 40 dengan Schedule 80?

Berdasarkan spesifikasi produk ini, Pipe Nipple Schedule 40 memiliki ketebalan dinding standar untuk tekanan rendah hingga 125 psi pada suhu 72°F. Schedule 80 umumnya memiliki dinding lebih tebal untuk tekanan lebih tinggi, namun data spesifik tidak tersedia pada produk ini.

Bagaimana cara memilih Pipe Nipple yang tepat untuk sistem perpipaan saya?

Pilih Pipe Nipple berdasarkan ukuran nominal (3 inci), jenis ulir (Male NPT x Male NPT), tekanan operasi (maksimum 125 psi pada 72°F), dan material sealant (PTFE). Pastikan panjang (8 inci) sesuai dengan kebutuhan sambungan Anda.

Digunakan dalam

Aplikasi umum untuk USA INDUSTRIALS
Chemical processing — USA INDUSTRIALS FEP-encapsulated silicone cam-and-groove gaskets for corrosion-resistant sealing in coupling systems.
Food and beverage — USA INDUSTRIALS food-grade FKM cam-and-groove gaskets for sanitary fluid transfer in processing lines.
Water treatment — USA INDUSTRIALS 304 stainless steel gate valves for isolation in piping systems handling non-potable water.
Oil and gas — USA INDUSTRIALS brass ball valves for manual shut-off in low-pressure gas or fluid lines.
Pharmaceutical manufacturing — USA INDUSTRIALS 316 stainless steel globe valves for precise flow control in clean-room environments.
General industrial MRO — USA INDUSTRIALS polypropylene cam-and-groove fittings for temporary hose connections in plant maintenance.

USA INDUSTRIALS Produk

3G Electric memasok USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Male NPT x Male NPT pipe nipple with Schedule 40 wall, welded construction, and factory-applied PTFE thread sealant. Nominal pipe size 1/4 in, length 7/8 in. Maximum operating pressure 125 psi at 72°F. Suitable for connecting threaded fittings in low-pressure plumbing, pneumatic, and fluid-handling systems
USA INDUSTRIALS
Male NPT x Male NPT pipe nipple with Schedule 40 wall, welded construction, and factory-applied PTFE thread sealant. Nominal pipe size 1/4 in, length 7/8 in. Maximum operating pressure 125 psi at 72°F. Suitable for connecting threaded fittings in low-pressure plumbing, pneumatic, and fluid-handling systems
Male NPT x Male NPT pipe nipple with Schedule 40 wall thickness, welded construction, and pre-applied PTFE thread sealant. Nominal size 3/8 in, length 8 in, maximum operating pressure 125 psi at 72°F. Used for connecting threaded fittings in low-pressure water, air, and non-corrosive gas lines
USA INDUSTRIALS
Male NPT x Male NPT pipe nipple with Schedule 40 wall thickness, welded construction, and pre-applied PTFE thread sealant. Nominal size 3/8 in, length 8 in, maximum operating pressure 125 psi at 72°F. Used for connecting threaded fittings in low-pressure water, air, and non-corrosive gas lines
This Schedule 40 welded pipe nipple is 48 inches long with a 3/8 inch nominal pipe size and male NPT threads on both ends. It is pre-applied with PTFE thread sealant for leak-resistant connections in low-pressure piping systems. Suitable for water, air, and gas lines in industrial plants, HVAC systems, and process equipment where a 48-inch extension is needed. Maximum operating pressure is 125 psi at 72°F
USA INDUSTRIALS
This Schedule 40 welded pipe nipple is 48 inches long with a 3/8 inch nominal pipe size and male NPT threads on both ends. It is pre-applied with PTFE thread sealant for leak-resistant connections in low-pressure piping systems. Suitable for water, air, and gas lines in industrial plants, HVAC systems, and process equipment where a 48-inch extension is needed. Maximum operating pressure is 125 psi at 72°F
This pipe nipple is a Schedule 40 low-pressure fitting with 1 in nominal pipe size, 1 1/2 in length, and Male NPT x Male NPT connections. It features welded construction and PTFE thread sealant applied to the threads. Rated for maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil systems
USA INDUSTRIALS
This pipe nipple is a Schedule 40 low-pressure fitting with 1 in nominal pipe size, 1 1/2 in length, and Male NPT x Male NPT connections. It features welded construction and PTFE thread sealant applied to the threads. Rated for maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil systems
This Schedule 40 low-pressure pipe nipple has a 1 in nominal pipe size and 2 1/2 in length with Male NPT threads on both ends. It is welded and pre-applied with PTFE thread sealant for leak prevention. Rated for a maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or gas lines
USA INDUSTRIALS
This Schedule 40 low-pressure pipe nipple has a 1 in nominal pipe size and 2 1/2 in length with Male NPT threads on both ends. It is welded and pre-applied with PTFE thread sealant for leak prevention. Rated for a maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or gas lines
This Schedule 40 welded pipe nipple has male NPT threads on both ends and a pre-applied PTFE thread sealant for leak-resistant joints. It is rated for a maximum operating pressure of 125 psi at 72°F. Commonly used in low-pressure plumbing, pneumatic, and fluid-handling systems for connecting threaded pipes
USA INDUSTRIALS
This Schedule 40 welded pipe nipple has male NPT threads on both ends and a pre-applied PTFE thread sealant for leak-resistant joints. It is rated for a maximum operating pressure of 125 psi at 72°F. Commonly used in low-pressure plumbing, pneumatic, and fluid-handling systems for connecting threaded pipes

Lainnya dari USA INDUSTRIALS

Lihat semua USA INDUSTRIALS suku cadang →
Schedule 40 welded steel pipe nipple with male NPT threads on both ends. Pre-applied PTFE thread sealant for leak-resistant joints. Rated for 125 psi at 72°F. Used to extend or connect piping in low-pressure water, air, and gas systems
USA INDUSTRIALS
Schedule 40 welded steel pipe nipple with male NPT threads on both ends. Pre-applied PTFE thread sealant for leak-resistant joints. Rated for 125 psi at 72°F. Used to extend or connect piping in low-pressure water, air, and gas systems
This Schedule 40 welded pipe nipple features male NPT threads on both ends and is pre-applied with PTFE thread sealant for leak-resistant connections. Rated for 125 psi at 72°F, it is commonly used in low-pressure plumbing, HVAC, and industrial piping systems for water, air, and non-corrosive fluids
USA INDUSTRIALS
This Schedule 40 welded pipe nipple features male NPT threads on both ends and is pre-applied with PTFE thread sealant for leak-resistant connections. Rated for 125 psi at 72°F, it is commonly used in low-pressure plumbing, HVAC, and industrial piping systems for water, air, and non-corrosive fluids
Schedule 40 welded pipe nipple with 1 in nominal size, 4 in length, and Male NPT threads on both ends. Factory-applied PTFE thread sealant aids in creating leak-resistant joints. Maximum operating pressure 125 psi at 72°F. Suitable for low-pressure fluid or gas connections in plumbing and industrial piping systems
USA INDUSTRIALS
Schedule 40 welded pipe nipple with 1 in nominal size, 4 in length, and Male NPT threads on both ends. Factory-applied PTFE thread sealant aids in creating leak-resistant joints. Maximum operating pressure 125 psi at 72°F. Suitable for low-pressure fluid or gas connections in plumbing and industrial piping systems
This Schedule 40 welded pipe nipple has male NPT threads on both ends and a 1/2 in nominal size. It is 18 in long and includes PTFE thread sealant. Rated for 125 psi at 72°F, it is used in low-pressure water, air, and gas piping systems
USA INDUSTRIALS
This Schedule 40 welded pipe nipple has male NPT threads on both ends and a 1/2 in nominal size. It is 18 in long and includes PTFE thread sealant. Rated for 125 psi at 72°F, it is used in low-pressure water, air, and gas piping systems
Schedule 40 welded pipe nipple with 1-1/2 in nominal pipe size, 60 in length, and Male NPT x Male NPT connections. Includes PTFE thread sealant. Maximum operating pressure 125 psi at 72°F. Used in low-pressure water, air, and gas lines
USA INDUSTRIALS
Schedule 40 welded pipe nipple with 1-1/2 in nominal pipe size, 60 in length, and Male NPT x Male NPT connections. Includes PTFE thread sealant. Maximum operating pressure 125 psi at 72°F. Used in low-pressure water, air, and gas lines
Schedule 40 welded steel pipe nipple with 3/4 in nominal size, 3 in length, and male NPT threads on both ends. PTFE thread sealant applied. Rated for 125 psi maximum operating pressure at 72°F. Used for connecting threaded fittings in low-pressure plumbing, air, water, and gas systems
USA INDUSTRIALS
Schedule 40 welded steel pipe nipple with 3/4 in nominal size, 3 in length, and male NPT threads on both ends. PTFE thread sealant applied. Rated for 125 psi maximum operating pressure at 72°F. Used for connecting threaded fittings in low-pressure plumbing, air, water, and gas systems
Schedule 40 low-pressure pipe nipple with 1/2 in nominal size, 3 in length, and Male NPT threads on both ends. Welded construction with PTFE thread sealant applied. Rated for 125 psi at 72°F. Used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil lines
USA INDUSTRIALS
Schedule 40 low-pressure pipe nipple with 1/2 in nominal size, 3 in length, and Male NPT threads on both ends. Welded construction with PTFE thread sealant applied. Rated for 125 psi at 72°F. Used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil lines
This Schedule 40 welded pipe nipple is designed for low-pressure applications up to 125 psi at 72°F. It features male NPT threads on both ends and factory-applied PTFE thread sealant to facilitate leak-resistant connections. Commonly used in plumbing, pneumatic, and fluid-handling systems for joining threaded pipes
USA INDUSTRIALS
This Schedule 40 welded pipe nipple is designed for low-pressure applications up to 125 psi at 72°F. It features male NPT threads on both ends and factory-applied PTFE thread sealant to facilitate leak-resistant connections. Commonly used in plumbing, pneumatic, and fluid-handling systems for joining threaded pipes