Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
USA INDUSTRIALS Pipe Nipple: 3/8 in Nominal Pipe Size, Schedule 40, Welded, PTFE - Schedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant
USA INDUSTRIALSSchedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant

USA INDUSTRIALS Pipe Nipple: 3/8 in Nominal Pipe Size, Schedule 40, Welded, PTFE

USA INDUSTRIALS Pipe Nipple berukuran 3/8 in Nominal Pipe Size dengan panjang 2 in, tipe Male NPT x Male NPT, Schedule 40, dan dilapisi PTFE. Produk ini merupakan pipa bertekanan rendah yang dilas (welded) dan telah…

SKU 3G-OTH-483736

Juga terdaftar sebagai: ZUSAPF22291 · ZUSA PF 22291

Merek
USA INDUSTRIALS
Item
Pipe Nipple: 3/8 in Nominal Pipe Size, Schedule 40, Welded, PTFE
Kategori
Schedule 40 Low Pressure Pipe & Pipe Nipples with Thread Sealant
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

USA INDUSTRIALS
Manufacturer Part Number
ZUSA-PF-22291
Type
Male NPT x Male NPT, Schedule 40, Welded, PTFE
Lg
2 in
Connection Type
Male NPT x Male NPT
Thread Sealant Type
PTFE
Maximum Operating Pressure
125 psi @ 72°F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

USA INDUSTRIALS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

USA INDUSTRIALS Pipe Nipple berukuran 3/8 in Nominal Pipe Size dengan panjang 2 in, tipe Male NPT x Male NPT, Schedule 40, dan dilapisi PTFE. Produk ini merupakan pipa bertekanan rendah yang dilas (welded) dan telah dilengkapi thread sealant PTFE, cocok untuk aplikasi perpipaan industri yang membutuhkan sambungan kedap udara. Dengan Maximum Operating Pressure 125 psi @ 72°F, produk ini ideal untuk sistem perpipaan bertekanan rendah di berbagai sektor industri di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi USA INDUSTRIALS Pipe Nipple 3/8 in?

USA INDUSTRIALS Pipe Nipple ini memiliki ukuran 3/8 in Nominal Pipe Size, panjang 2 in, tipe Male NPT x Male NPT, Schedule 40, dan dilapisi PTFE. Maksimum tekanan operasi adalah 125 psi @ 72°F. Produk ini dilas (welded) dan sudah dilengkapi thread sealant PTFE.

Untuk apa Pipe Nipple 3/8 in Schedule 40 digunakan?

Pipe Nipple 3/8 in Schedule 40 dari USA INDUSTRIALS digunakan untuk menyambung dua pipa atau fitting berulir Male NPT dalam sistem perpipaan bertekanan rendah. Lapisan PTFE membantu mencegah kebocoran pada sambungan, cocok untuk aplikasi industri seperti saluran udara, air, atau bahan kimia ringan.

Di mana beli USA INDUSTRIALS Pipe Nipple 3/8 in di Indonesia?

Anda dapat membeli USA INDUSTRIALS Pipe Nipple 3/8 in melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah.

Apa perbedaan Pipe Nipple Schedule 40 dengan Schedule 80?

Pipe Nipple Schedule 40 memiliki dinding yang lebih tipis dibanding Schedule 80, sehingga tekanan operasi maksimumnya lebih rendah. Untuk USA INDUSTRIALS Pipe Nipple 3/8 in Schedule 40, tekanan maksimum adalah 125 psi @ 72°F. Schedule 80 biasanya digunakan untuk aplikasi tekanan lebih tinggi.

Apakah thread sealant PTFE sudah terpasang pada produk ini?

Ya, USA INDUSTRIALS Pipe Nipple 3/8 in ini sudah dilengkapi thread sealant PTFE yang terintegrasi pada ulir. Hal ini memudahkan pemasangan dan membantu mencegah kebocoran tanpa perlu menambahkan sealant tambahan.

Digunakan dalam

Aplikasi umum untuk USA INDUSTRIALS
Chemical processing — USA INDUSTRIALS FEP-encapsulated silicone cam-and-groove gaskets for corrosion-resistant sealing in coupling systems.
Food and beverage — USA INDUSTRIALS food-grade FKM cam-and-groove gaskets for sanitary fluid transfer in processing lines.
Water treatment — USA INDUSTRIALS 304 stainless steel gate valves for isolation in piping systems handling non-potable water.
Oil and gas — USA INDUSTRIALS brass ball valves for manual shut-off in low-pressure gas or fluid lines.
Pharmaceutical manufacturing — USA INDUSTRIALS 316 stainless steel globe valves for precise flow control in clean-room environments.
General industrial MRO — USA INDUSTRIALS polypropylene cam-and-groove fittings for temporary hose connections in plant maintenance.
Not sure this is the right part? Photo-identify it→

USA INDUSTRIALS Produk

3G Electric memasok USA INDUSTRIALS schedule 40 low pressure pipe & pipe nipples with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari USA INDUSTRIALS

Lihat semua USA INDUSTRIALS suku cadang →
Schedule 40 welded steel pipe nipple with male NPT threads on both ends. Pre-applied PTFE thread sealant for leak-resistant joints. Rated for 125 psi at 72°F. Used to extend or connect piping in low-pressure water, air, and gas systems
USA INDUSTRIALS
Schedule 40 welded steel pipe nipple with male NPT threads on both ends. Pre-applied PTFE thread sealant for leak-resistant joints. Rated for 125 psi at 72°F. Used to extend or connect piping in low-pressure water, air, and gas systems
This Schedule 40 welded pipe nipple features male NPT threads on both ends and is pre-applied with PTFE thread sealant for leak-resistant connections. Rated for 125 psi at 72°F, it is commonly used in low-pressure plumbing, HVAC, and industrial piping systems for water, air, and non-corrosive fluids
USA INDUSTRIALS
This Schedule 40 welded pipe nipple features male NPT threads on both ends and is pre-applied with PTFE thread sealant for leak-resistant connections. Rated for 125 psi at 72°F, it is commonly used in low-pressure plumbing, HVAC, and industrial piping systems for water, air, and non-corrosive fluids
Schedule 40 welded pipe nipple with 1 in nominal size, 4 in length, and Male NPT threads on both ends. Factory-applied PTFE thread sealant aids in creating leak-resistant joints. Maximum operating pressure 125 psi at 72°F. Suitable for low-pressure fluid or gas connections in plumbing and industrial piping systems
USA INDUSTRIALS
Schedule 40 welded pipe nipple with 1 in nominal size, 4 in length, and Male NPT threads on both ends. Factory-applied PTFE thread sealant aids in creating leak-resistant joints. Maximum operating pressure 125 psi at 72°F. Suitable for low-pressure fluid or gas connections in plumbing and industrial piping systems
This Schedule 40 welded pipe nipple has male NPT threads on both ends and a 1/2 in nominal size. It is 18 in long and includes PTFE thread sealant. Rated for 125 psi at 72°F, it is used in low-pressure water, air, and gas piping systems
USA INDUSTRIALS
This Schedule 40 welded pipe nipple has male NPT threads on both ends and a 1/2 in nominal size. It is 18 in long and includes PTFE thread sealant. Rated for 125 psi at 72°F, it is used in low-pressure water, air, and gas piping systems
Schedule 40 welded pipe nipple with 1-1/2 in nominal pipe size, 60 in length, and Male NPT x Male NPT connections. Includes PTFE thread sealant. Maximum operating pressure 125 psi at 72°F. Used in low-pressure water, air, and gas lines
USA INDUSTRIALS
Schedule 40 welded pipe nipple with 1-1/2 in nominal pipe size, 60 in length, and Male NPT x Male NPT connections. Includes PTFE thread sealant. Maximum operating pressure 125 psi at 72°F. Used in low-pressure water, air, and gas lines
Schedule 40 welded steel pipe nipple with 3/4 in nominal size, 3 in length, and male NPT threads on both ends. PTFE thread sealant applied. Rated for 125 psi maximum operating pressure at 72°F. Used for connecting threaded fittings in low-pressure plumbing, air, water, and gas systems
USA INDUSTRIALS
Schedule 40 welded steel pipe nipple with 3/4 in nominal size, 3 in length, and male NPT threads on both ends. PTFE thread sealant applied. Rated for 125 psi maximum operating pressure at 72°F. Used for connecting threaded fittings in low-pressure plumbing, air, water, and gas systems
Schedule 40 low-pressure pipe nipple with 1/2 in nominal size, 3 in length, and Male NPT threads on both ends. Welded construction with PTFE thread sealant applied. Rated for 125 psi at 72°F. Used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil lines
USA INDUSTRIALS
Schedule 40 low-pressure pipe nipple with 1/2 in nominal size, 3 in length, and Male NPT threads on both ends. Welded construction with PTFE thread sealant applied. Rated for 125 psi at 72°F. Used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil lines
This Schedule 40 welded pipe nipple is designed for low-pressure applications up to 125 psi at 72°F. It features male NPT threads on both ends and factory-applied PTFE thread sealant to facilitate leak-resistant connections. Commonly used in plumbing, pneumatic, and fluid-handling systems for joining threaded pipes
USA INDUSTRIALS
This Schedule 40 welded pipe nipple is designed for low-pressure applications up to 125 psi at 72°F. It features male NPT threads on both ends and factory-applied PTFE thread sealant to facilitate leak-resistant connections. Commonly used in plumbing, pneumatic, and fluid-handling systems for joining threaded pipes