Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Nipel Pipa USA INDUSTRIALS: Ukuran Pipa Nominal 1/4 in, Panjang 5 in, Schedule 40, Baja Galvanis - Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
USA INDUSTRIALSSchedule 40 Threaded on Both Ends Pipe with Thread Sealant

Nipel Pipa USA INDUSTRIALS: Ukuran Pipa Nominal 1/4 in, Panjang 5 in, Schedule 40, Baja Galvanis

USA INDUSTRIALS menghadirkan Pipe Nipple berukuran 1/4 in Nominal Pipe Size dengan panjang 5 in, terbuat dari Galvanized Steel Schedule 40 yang dilengkapi ulir di kedua ujung (Male NPT x Male NPT) dan sealant PTFE…

SKU 3G-OTH-464518

Juga terdaftar sebagai: ZUSAPF22362 · ZUSA PF 22362

Merek
USA INDUSTRIALS
Item
Nipel Pipa USA INDUSTRIALS: Ukuran Pipa Nominal 1/4 in, Panjang 5 in, Schedule 40, Baja Galvanis
Kategori
Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

USA INDUSTRIALS
Manufacturer Part Number
ZUSA-PF-22362
Type
Schedule 40, Galvanized Steel, Threaded on Both Ends
Lg
5 in
Pipe Material
Galvanized Steel
Connection Type
Male NPT x Male NPT
Thread Sealant Type
PTFE
Maximum Operating Pressure
125 psi @ 72°F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

USA INDUSTRIALS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

USA INDUSTRIALS menghadirkan Pipe Nipple berukuran 1/4 in Nominal Pipe Size dengan panjang 5 in, terbuat dari Galvanized Steel Schedule 40 yang dilengkapi ulir di kedua ujung (Male NPT x Male NPT) dan sealant PTFE. Produk ini dirancang untuk aplikasi perpipaan industri dengan tekanan operasi maksimum 125 psi @ 72°F, cocok untuk sistem udara, air, atau minyak ringan. Cari pipa nipple galvanis untuk kebutuhan proyek Anda? Produk ini adalah pilihan tepat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi pipa nipple USA INDUSTRIALS ini?

Pipe Nipple USA INDUSTRIALS memiliki ukuran 1/4 in Nominal Pipe Size, panjang 5 in, material Galvanized Steel Schedule 40, ulir Male NPT x Male NPT, dan dilengkapi sealant PTFE. Tekanan operasi maksimum mencapai 125 psi @ 72°F.

Untuk apa pipa nipple galvanis 1/4 in digunakan?

Pipa nipple ini digunakan untuk menyambung dua komponen perpipaan berulir NPT, seperti katup, regulator, atau fitting, pada sistem udara bertekanan, air, atau minyak ringan di lingkungan industri. Material galvanis memberikan ketahanan korosi yang baik.

Di mana beli pipa nipple USA INDUSTRIALS di Indonesia?

Anda dapat membeli Pipe Nipple USA INDUSTRIALS ZUSA-PF-22362 melalui 3G Electric, distributor resmi yang melayani pengiriman ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga produk tiba dengan aman di lokasi proyek Anda.

Apa perbedaan pipa nipple Schedule 40 dengan Schedule 80?

Schedule 40 memiliki dinding lebih tipis dibanding Schedule 80, sehingga tekanan maksimumnya lebih rendah. Untuk produk ini, tekanan maksimum adalah 125 psi @ 72°F. Schedule 80 biasanya digunakan untuk aplikasi tekanan lebih tinggi.

Apakah pipa nipple ini sudah dilapisi sealant?

Ya, produk ini sudah dilengkapi sealant PTFE pada ulirnya, sehingga siap dipasang langsung tanpa perlu menambahkan pita PTFE atau sealant lain. Pastikan ulir bersih sebelum pemasangan untuk hasil optimal.

Digunakan dalam

Aplikasi umum untuk USA INDUSTRIALS
Chemical processing — USA INDUSTRIALS FEP-encapsulated silicone cam-and-groove gaskets for corrosion-resistant sealing in coupling systems.
Food and beverage — USA INDUSTRIALS food-grade FKM cam-and-groove gaskets for sanitary fluid transfer in processing lines.
Water treatment — USA INDUSTRIALS 304 stainless steel gate valves for isolation in piping systems handling non-potable water.
Oil and gas — USA INDUSTRIALS brass ball valves for manual shut-off in low-pressure gas or fluid lines.
Pharmaceutical manufacturing — USA INDUSTRIALS 316 stainless steel globe valves for precise flow control in clean-room environments.
General industrial MRO — USA INDUSTRIALS polypropylene cam-and-groove fittings for temporary hose connections in plant maintenance.

USA INDUSTRIALS Produk

3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Schedule 40 galvanized steel pipe threaded on both ends with PTFE thread sealant. Features Male NPT x Male NPT connections. Rated for maximum operating pressure of 125 psi at 72°F. Used to connect two male NPT fittings in plumbing, compressed air, and low-pressure fluid systems
USA INDUSTRIALS
Schedule 40 galvanized steel pipe threaded on both ends with PTFE thread sealant. Features Male NPT x Male NPT connections. Rated for maximum operating pressure of 125 psi at 72°F. Used to connect two male NPT fittings in plumbing, compressed air, and low-pressure fluid systems
Galvanized steel pipe nipple with Schedule 40 wall thickness, threaded male NPT on both ends. Includes PTFE thread sealant. Rated for 125 psi at 72°F. Used for connecting pipe fittings in plumbing, compressed air, and water systems
USA INDUSTRIALS
Galvanized steel pipe nipple with Schedule 40 wall thickness, threaded male NPT on both ends. Includes PTFE thread sealant. Rated for 125 psi at 72°F. Used for connecting pipe fittings in plumbing, compressed air, and water systems
Male NPT x Male NPT pipe nipple with Schedule 40 wall thickness, welded construction, and pre-applied PTFE thread sealant. Nominal size 3/8 in, length 8 in, maximum operating pressure 125 psi at 72°F. Used for connecting threaded fittings in low-pressure water, air, and non-corrosive gas lines
USA INDUSTRIALS
Male NPT x Male NPT pipe nipple with Schedule 40 wall thickness, welded construction, and pre-applied PTFE thread sealant. Nominal size 3/8 in, length 8 in, maximum operating pressure 125 psi at 72°F. Used for connecting threaded fittings in low-pressure water, air, and non-corrosive gas lines
This pipe nipple is a Schedule 40 low-pressure fitting with 1 in nominal pipe size, 1 1/2 in length, and Male NPT x Male NPT connections. It features welded construction and PTFE thread sealant applied to the threads. Rated for maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil systems
USA INDUSTRIALS
This pipe nipple is a Schedule 40 low-pressure fitting with 1 in nominal pipe size, 1 1/2 in length, and Male NPT x Male NPT connections. It features welded construction and PTFE thread sealant applied to the threads. Rated for maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or oil systems
This Schedule 40 welded pipe nipple is 48 inches long with a 3/8 inch nominal pipe size and male NPT threads on both ends. It is pre-applied with PTFE thread sealant for leak-resistant connections in low-pressure piping systems. Suitable for water, air, and gas lines in industrial plants, HVAC systems, and process equipment where a 48-inch extension is needed. Maximum operating pressure is 125 psi at 72°F
USA INDUSTRIALS
This Schedule 40 welded pipe nipple is 48 inches long with a 3/8 inch nominal pipe size and male NPT threads on both ends. It is pre-applied with PTFE thread sealant for leak-resistant connections in low-pressure piping systems. Suitable for water, air, and gas lines in industrial plants, HVAC systems, and process equipment where a 48-inch extension is needed. Maximum operating pressure is 125 psi at 72°F
This Schedule 40 low-pressure pipe nipple has a 1 in nominal pipe size and 2 1/2 in length with Male NPT threads on both ends. It is welded and pre-applied with PTFE thread sealant for leak prevention. Rated for a maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or gas lines
USA INDUSTRIALS
This Schedule 40 low-pressure pipe nipple has a 1 in nominal pipe size and 2 1/2 in length with Male NPT threads on both ends. It is welded and pre-applied with PTFE thread sealant for leak prevention. Rated for a maximum operating pressure of 125 psi at 72°F, it is used to connect two male NPT fittings in low-pressure plumbing, air, water, or gas lines

Lainnya dari USA INDUSTRIALS

Lihat semua USA INDUSTRIALS suku cadang →
This galvanized steel pipe is Schedule 40, threaded on both ends with Male NPT connections and pre-applied PTFE thread sealant. Rated for 125 psi at 72°F, it is used to connect fittings in plumbing, compressed air, and low-pressure fluid systems
USA INDUSTRIALS
This galvanized steel pipe is Schedule 40, threaded on both ends with Male NPT connections and pre-applied PTFE thread sealant. Rated for 125 psi at 72°F, it is used to connect fittings in plumbing, compressed air, and low-pressure fluid systems
This Schedule 40 galvanized steel pipe is threaded on both ends with male NPT connections and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 125 psi at 72°F. Commonly used to extend or connect piping in low-pressure fluid, compressed air, and industrial plumbing systems
USA INDUSTRIALS
This Schedule 40 galvanized steel pipe is threaded on both ends with male NPT connections and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 125 psi at 72°F. Commonly used to extend or connect piping in low-pressure fluid, compressed air, and industrial plumbing systems
Schedule 40 black coated steel pipe with male NPT threads on both ends and pre-applied PTFE thread sealant. Nominal pipe size 2 in, length 7 in. Rated for maximum operating pressure of 125 psi at 72°F. Used for connecting threaded fittings in low-pressure air, water, or fluid piping systems
USA INDUSTRIALS
Schedule 40 black coated steel pipe with male NPT threads on both ends and pre-applied PTFE thread sealant. Nominal pipe size 2 in, length 7 in. Rated for maximum operating pressure of 125 psi at 72°F. Used for connecting threaded fittings in low-pressure air, water, or fluid piping systems
Galvanized steel pipe nipple, Schedule 40, 5 in length, threaded both ends with Male NPT x Male NPT connections. Includes PTFE thread sealant. Maximum operating pressure 125 psi at 72°F. Used to connect male NPT threaded fittings in plumbing, compressed air, and low-pressure fluid systems
USA INDUSTRIALS
Galvanized steel pipe nipple, Schedule 40, 5 in length, threaded both ends with Male NPT x Male NPT connections. Includes PTFE thread sealant. Maximum operating pressure 125 psi at 72°F. Used to connect male NPT threaded fittings in plumbing, compressed air, and low-pressure fluid systems
This Schedule 40 galvanized steel pipe is threaded on both ends with male NPT connections and pre-applied PTFE thread sealant. It is suitable for connecting male threaded fittings in low-pressure fluid, compressed air, and plumbing systems. Rated for maximum operating pressure of 125 psi at 72°F
USA INDUSTRIALS
This Schedule 40 galvanized steel pipe is threaded on both ends with male NPT connections and pre-applied PTFE thread sealant. It is suitable for connecting male threaded fittings in low-pressure fluid, compressed air, and plumbing systems. Rated for maximum operating pressure of 125 psi at 72°F
Galvanized steel Schedule 40 pipe with male NPT threads on both ends and pre-applied PTFE thread sealant. Designed for connecting fittings in low-pressure water, air, and gas lines up to 125 psi at 72°F. Welded construction provides corrosion resistance for general industrial plumbing applications
USA INDUSTRIALS
Galvanized steel Schedule 40 pipe with male NPT threads on both ends and pre-applied PTFE thread sealant. Designed for connecting fittings in low-pressure water, air, and gas lines up to 125 psi at 72°F. Welded construction provides corrosion resistance for general industrial plumbing applications
This Schedule 40 galvanized steel pipe is threaded on both ends with Male NPT x Male NPT connections and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 125 psi at 72°F. Commonly used in low-pressure plumbing, compressed air, and water systems for connecting two male NPT fittings
USA INDUSTRIALS
This Schedule 40 galvanized steel pipe is threaded on both ends with Male NPT x Male NPT connections and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 125 psi at 72°F. Commonly used in low-pressure plumbing, compressed air, and water systems for connecting two male NPT fittings
This Schedule 40 galvanized steel pipe is threaded on both ends with male NPT connections and pre-applied PTFE thread sealant. It is used for connecting fittings in low-pressure water, air, and fluid lines requiring corrosion resistance. Maximum operating pressure is 125 psi at 72°F
USA INDUSTRIALS
This Schedule 40 galvanized steel pipe is threaded on both ends with male NPT connections and pre-applied PTFE thread sealant. It is used for connecting fittings in low-pressure water, air, and fluid lines requiring corrosion resistance. Maximum operating pressure is 125 psi at 72°F