Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
USA INDUSTRIALS Low-Pressure Threaded Pipe Fitting - Low-Pressure Threaded Pipe Fittings
USA INDUSTRIALSLow-Pressure Threaded Pipe Fittings

USA INDUSTRIALS Low-Pressure Threaded Pipe Fitting

USA INDUSTRIALS Metal Pipe Elbow adalah sambungan pipa ulir bertekanan rendah dengan konfigurasi Female NPT Threaded x Female NPT Threaded, sudut 90°, dan ukuran fitting pipa 1/2 in x 1/4 in. Dengan tekanan operasi…

SKU 3G-OTH-653191

Juga terdaftar sebagai: ZUSAPF22961 · ZUSA PF 22961

Merek
USA INDUSTRIALS
Item
Low-Pressure Threaded Pipe Fitting
Kategori
Low-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

USA INDUSTRIALS
Manufacturer Part Number
ZUSA-PF-22961
Type
Female NPT Threaded x Female NPT Threaded, 150 psi
Elbow
90°
Fitting Pipe Size
1/2 in x 1/4 in
Maximum Operating Pressure
150 psi

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

USA INDUSTRIALS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

USA INDUSTRIALS Metal Pipe Elbow adalah sambungan pipa ulir bertekanan rendah dengan konfigurasi Female NPT Threaded x Female NPT Threaded, sudut 90°, dan ukuran fitting pipa 1/2 in x 1/4 in. Dengan tekanan operasi maksimum 150 psi, produk ini cocok untuk aplikasi perpipaan industri yang membutuhkan perubahan arah aliran secara presisi. Sebagai distributor resmi, 3G Electric menyediakan sambungan pipa ini untuk kebutuhan peralatan industri di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi USA INDUSTRIALS Metal Pipe Elbow 1/2 in x 1/4 in?

USA INDUSTRIALS Metal Pipe Elbow memiliki tipe Female NPT Threaded x Female NPT Threaded, sudut 90°, ukuran fitting pipa 1/2 in x 1/4 in, dan tekanan operasi maksimum 150 psi. Nomor komponennya adalah ZUSA-PF-22961.

Untuk apa Metal Pipe Elbow 1/2 in x 1/4 in digunakan?

Metal Pipe Elbow 90° ini digunakan untuk mengubah arah aliran fluida dalam sistem perpipaan bertekanan rendah hingga 150 psi. Cocok untuk aplikasi industri seperti saluran udara, air, atau minyak dengan koneksi Female NPT.

Di mana beli USA INDUSTRIALS Metal Pipe Elbow di Indonesia?

Anda dapat membeli USA INDUSTRIALS Metal Pipe Elbow melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman tepat waktu.

Bagaimana cara memilih sambungan pipa ulir yang tepat?

Pilih sambungan pipa berdasarkan ukuran fitting (misalnya 1/2 in x 1/4 in), jenis ulir (Female NPT), tekanan operasi (maksimum 150 psi), dan sudut yang dibutuhkan (90°). Pastikan kompatibel dengan sistem perpipaan Anda.

Digunakan dalam

Aplikasi umum untuk USA INDUSTRIALS
Chemical processing — USA INDUSTRIALS FEP-encapsulated silicone cam-and-groove gaskets for corrosion-resistant sealing in coupling systems.
Food and beverage — USA INDUSTRIALS food-grade FKM cam-and-groove gaskets for sanitary fluid transfer in processing lines.
Water treatment — USA INDUSTRIALS 304 stainless steel gate valves for isolation in piping systems handling non-potable water.
Oil and gas — USA INDUSTRIALS brass ball valves for manual shut-off in low-pressure gas or fluid lines.
Pharmaceutical manufacturing — USA INDUSTRIALS 316 stainless steel globe valves for precise flow control in clean-room environments.
General industrial MRO — USA INDUSTRIALS polypropylene cam-and-groove fittings for temporary hose connections in plant maintenance.
Not sure this is the right part? Photo-identify it→

USA INDUSTRIALS Produk

3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This 90° elbow fitting connects two female NPT threaded pipes of different sizes, 1/2 in and 1/4 in, for low-pressure fluid or air systems. Rated to 150 psi, it is suitable for applications requiring a directional change in plumbing, pneumatic, or hydraulic lines
USA INDUSTRIALS
This 90° elbow fitting connects two female NPT threaded pipes of different sizes, 1/2 in and 1/4 in, for low-pressure fluid or air systems. Rated to 150 psi, it is suitable for applications requiring a directional change in plumbing, pneumatic, or hydraulic lines
This 90° elbow fitting connects two pipes at a right angle in low-pressure plumbing and industrial systems. It has a 1/2 in x 1/2 in pipe size with Female NPT Threaded x Male NPT Threaded ends and a maximum operating pressure of 150 psi
USA INDUSTRIALS
This 90° elbow fitting connects two pipes at a right angle in low-pressure plumbing and industrial systems. It has a 1/2 in x 1/2 in pipe size with Female NPT Threaded x Male NPT Threaded ends and a maximum operating pressure of 150 psi
This 90° elbow fitting connects two pipes of 1/2 inch size, changing flow direction in low-pressure piping systems. It features a female NPT threaded connection on one end and a male NPT threaded connection on the other, with a maximum operating pressure of 150 psi. Suitable for water, air, and non-corrosive fluid lines
USA INDUSTRIALS
This 90° elbow fitting connects two pipes of 1/2 inch size, changing flow direction in low-pressure piping systems. It features a female NPT threaded connection on one end and a male NPT threaded connection on the other, with a maximum operating pressure of 150 psi. Suitable for water, air, and non-corrosive fluid lines
This 90° elbow pipe fitting connects two female NPT threaded pipes of different sizes, 1-1/2 in and 1-1/4 in. It is rated for a maximum operating pressure of 150 psi and is suitable for low-pressure plumbing and industrial systems where flow direction change is needed
USA INDUSTRIALS
This 90° elbow pipe fitting connects two female NPT threaded pipes of different sizes, 1-1/2 in and 1-1/4 in. It is rated for a maximum operating pressure of 150 psi and is suitable for low-pressure plumbing and industrial systems where flow direction change is needed
This 90° elbow fitting connects two female NPT threaded pipes of different sizes, allowing a change in flow direction. It is rated for a maximum operating pressure of 150 psi and is suitable for low-pressure plumbing, pneumatic, and hydraulic systems
USA INDUSTRIALS
This 90° elbow fitting connects two female NPT threaded pipes of different sizes, allowing a change in flow direction. It is rated for a maximum operating pressure of 150 psi and is suitable for low-pressure plumbing, pneumatic, and hydraulic systems
This 90° elbow fitting connects two female NPT threaded pipes of different sizes (1-1/2 in x 1-1/4 in) in low-pressure plumbing, pneumatic, or hydraulic systems. It redirects flow direction in confined spaces and is rated for a maximum operating pressure of 150 psi
USA INDUSTRIALS
This 90° elbow fitting connects two female NPT threaded pipes of different sizes (1-1/2 in x 1-1/4 in) in low-pressure plumbing, pneumatic, or hydraulic systems. It redirects flow direction in confined spaces and is rated for a maximum operating pressure of 150 psi

Lainnya dari USA INDUSTRIALS

Lihat semua USA INDUSTRIALS suku cadang →
This 304 stainless steel tee (run x run x branch) is used to split or combine fluid flow in low-pressure piping systems. With a Class 150 rating and maximum operating pressure of 150 psi at 72 °F, it is suitable for water, air, or chemical lines requiring corrosion resistance. Fitting pipe size is 3/4 in x 3/8 in x 3/4 in
USA INDUSTRIALS
This 304 stainless steel tee (run x run x branch) is used to split or combine fluid flow in low-pressure piping systems. With a Class 150 rating and maximum operating pressure of 150 psi at 72 °F, it is suitable for water, air, or chemical lines requiring corrosion resistance. Fitting pipe size is 3/4 in x 3/8 in x 3/4 in
This straight pipe fitting connects male BSPP threads to male NPT threads, allowing transition between different thread standards. Rated for a maximum operating pressure of 150 psi, it is used in low-pressure industrial piping systems for air, water, or oil lines. The fitting accommodates a 1/2 in to 3/8 in pipe size change
USA INDUSTRIALS
This straight pipe fitting connects male BSPP threads to male NPT threads, allowing transition between different thread standards. Rated for a maximum operating pressure of 150 psi, it is used in low-pressure industrial piping systems for air, water, or oil lines. The fitting accommodates a 1/2 in to 3/8 in pipe size change
This low-pressure threaded pipe fitting features a straight configuration with male NPT threads on both ends, sized 1-1/2 in x 1-1/2 in. It is rated for a maximum operating pressure of 150 psi. Commonly used in industrial plumbing, pneumatic systems, and fluid handling applications requiring a leak-resistant joint
USA INDUSTRIALS
This low-pressure threaded pipe fitting features a straight configuration with male NPT threads on both ends, sized 1-1/2 in x 1-1/2 in. It is rated for a maximum operating pressure of 150 psi. Commonly used in industrial plumbing, pneumatic systems, and fluid handling applications requiring a leak-resistant joint
This low-pressure threaded pipe fitting features a 1/2 in x 1/2 in size with male BSPT threads on one end and male NPT threads on the other, in a straight configuration. It is rated for a maximum operating pressure of 150 psi. Commonly used in plumbing, pneumatic, and hydraulic systems to connect components with different thread standards
USA INDUSTRIALS
This low-pressure threaded pipe fitting features a 1/2 in x 1/2 in size with male BSPT threads on one end and male NPT threads on the other, in a straight configuration. It is rated for a maximum operating pressure of 150 psi. Commonly used in plumbing, pneumatic, and hydraulic systems to connect components with different thread standards
This low-pressure threaded pipe fitting connects two female BSPP threaded ports in a straight line. It has a 1 in x 1/4 in pipe size and a maximum operating pressure of 150 psi. Suitable for industrial fluid or air systems requiring a leak-resistant joint
USA INDUSTRIALS
This low-pressure threaded pipe fitting connects two female BSPP threaded ports in a straight line. It has a 1 in x 1/4 in pipe size and a maximum operating pressure of 150 psi. Suitable for industrial fluid or air systems requiring a leak-resistant joint
This low-pressure threaded pipe fitting connects two male NPT threaded pipes in a straight line. It is used in plumbing, pneumatic systems, and fluid transfer applications requiring a leak-resistant joint at pressures up to 150 psi. Fitting pipe size is 1 in x 3/8 in with a straight configuration
USA INDUSTRIALS
This low-pressure threaded pipe fitting connects two male NPT threaded pipes in a straight line. It is used in plumbing, pneumatic systems, and fluid transfer applications requiring a leak-resistant joint at pressures up to 150 psi. Fitting pipe size is 1 in x 3/8 in with a straight configuration
This straight pipe fitting connects male BSPP threads to male NPT threads, allowing adaptation between different thread standards. It is rated for a maximum operating pressure of 150 psi and is suitable for low-pressure pneumatic, hydraulic, and fluid-handling systems
USA INDUSTRIALS
This straight pipe fitting connects male BSPP threads to male NPT threads, allowing adaptation between different thread standards. It is rated for a maximum operating pressure of 150 psi and is suitable for low-pressure pneumatic, hydraulic, and fluid-handling systems
This Class 150 threaded pipe tee is made from 316 stainless steel for corrosion resistance. It features a run x run x branch configuration with pipe sizes of 1/2 in x 3/8 in x 1/2 in. Maximum operating pressure is 150 psi at 72 °F. Suitable for low-pressure water, air, or chemical lines
USA INDUSTRIALS
This Class 150 threaded pipe tee is made from 316 stainless steel for corrosion resistance. It features a run x run x branch configuration with pipe sizes of 1/2 in x 3/8 in x 1/2 in. Maximum operating pressure is 150 psi at 72 °F. Suitable for low-pressure water, air, or chemical lines