Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
USA INDUSTRIALS Steker: 1/4 in, Berulir, Kelas 150, 150 psi @ 72°F, Steker - Low-Pressure Threaded Pipe Fittings with Thread Sealant
USA INDUSTRIALSLow-Pressure Threaded Pipe Fittings with Thread Sealant

USA INDUSTRIALS Steker: 1/4 in, Berulir, Kelas 150, 150 psi @ 72°F, Steker

Plug USA INDUSTRIALS berulir, Class 150, dengan tekanan operasi maksimum 150 psi @ 72°F, terbuat dari Malleable Iron. Produk ini merupakan Low-Pressure Threaded Pipe Fittings yang dilengkapi dengan Thread Sealant…

SKU 3G-OTH-478168

Juga terdaftar sebagai: ZUSAPF23062 · ZUSA PF 23062

Merek
USA INDUSTRIALS
Item
Steker: 1/4 in, Berulir, Kelas 150, 150 psi @ 72°F, Steker
Kategori
Low-Pressure Threaded Pipe Fittings with Thread Sealant
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

USA INDUSTRIALS
Manufacturer Part Number
ZUSA-PF-23062
Type
Threaded, Class 150, 150 psi @ 72°F, Plug, Malleable Iron
Maximum Operating Pressure
150 psi @ 72 °F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

USA INDUSTRIALS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Plug USA INDUSTRIALS berulir, Class 150, dengan tekanan operasi maksimum 150 psi @ 72°F, terbuat dari Malleable Iron. Produk ini merupakan Low-Pressure Threaded Pipe Fittings yang dilengkapi dengan Thread Sealant, ideal untuk aplikasi perpipaan industri bertekanan rendah. Cocok digunakan sebagai komponen penutup pada sistem perpipaan di berbagai sektor industri di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa plug USA INDUSTRIALS ini digunakan?

Plug USA INDUSTRIALS berulir ini digunakan sebagai penutup ujung pipa pada sistem perpipaan bertekanan rendah. Dengan spesifikasi Threaded, Class 150, dan tekanan operasi maksimum 150 psi @ 72°F, produk ini cocok untuk aplikasi industri yang memerlukan penyumbatan sementara atau permanen pada jalur pipa.

Apa spesifikasi teknis plug USA INDUSTRIALS ZUSA-PF-23062?

Plug USA INDUSTRIALS dengan nomor bagian ZUSA-PF-23062 memiliki tipe Threaded, Class 150, tekanan operasi maksimum 150 psi @ 72°F, dan terbuat dari Malleable Iron. Produk ini termasuk dalam kategori Low-Pressure Threaded Pipe Fittings dan dilengkapi dengan Thread Sealant untuk mencegah kebocoran.

Di mana beli plug USA INDUSTRIALS di Indonesia?

Anda dapat membeli plug USA INDUSTRIALS ZUSA-PF-23062 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk informasi lebih lanjut.

Bagaimana cara memilih plug berulir yang tepat untuk sistem perpipaan saya?

Pilih plug berulir berdasarkan tekanan operasi, kelas material, dan ukuran pipa. Plug USA INDUSTRIALS ini memiliki spesifikasi Threaded, Class 150, tekanan maksimum 150 psi @ 72°F, dan terbuat dari Malleable Iron. Pastikan ukuran 1/4 in sesuai dengan fitting pipa Anda untuk mencegah kebocoran.

Digunakan dalam

Aplikasi umum untuk USA INDUSTRIALS
Chemical processing — USA INDUSTRIALS FEP-encapsulated silicone cam-and-groove gaskets for corrosion-resistant sealing in coupling systems.
Food and beverage — USA INDUSTRIALS food-grade FKM cam-and-groove gaskets for sanitary fluid transfer in processing lines.
Water treatment — USA INDUSTRIALS 304 stainless steel gate valves for isolation in piping systems handling non-potable water.
Oil and gas — USA INDUSTRIALS brass ball valves for manual shut-off in low-pressure gas or fluid lines.
Pharmaceutical manufacturing — USA INDUSTRIALS 316 stainless steel globe valves for precise flow control in clean-room environments.
General industrial MRO — USA INDUSTRIALS polypropylene cam-and-groove fittings for temporary hose connections in plant maintenance.

USA INDUSTRIALS Produk

3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This 1/4 in threaded plug is made of malleable iron and rated for Class 150 service up to 150 psi at 72°F. It includes PTFE thread sealant for leak-free sealing. Commonly used to close unused openings in low-pressure plumbing, HVAC, and industrial piping systems
USA INDUSTRIALS
This 1/4 in threaded plug is made of malleable iron and rated for Class 150 service up to 150 psi at 72°F. It includes PTFE thread sealant for leak-free sealing. Commonly used to close unused openings in low-pressure plumbing, HVAC, and industrial piping systems
This malleable iron pipe plug features a 1/2 in NPT male thread and is rated for a maximum operating pressure of 150 psi at 72°F. It comes pre-applied with PTFE thread sealant for a reliable seal. Used to close threaded pipe openings in low-pressure air, water, and oil lines
USA INDUSTRIALS
This malleable iron pipe plug features a 1/2 in NPT male thread and is rated for a maximum operating pressure of 150 psi at 72°F. It comes pre-applied with PTFE thread sealant for a reliable seal. Used to close threaded pipe openings in low-pressure air, water, and oil lines
This threaded pipe cap is made of malleable iron and rated Class 150 for low-pressure applications up to 150 psi at 72°F. It is used to seal the end of a piping system, commonly in plumbing, HVAC, and process lines for maintenance or isolation. The fitting comes with thread sealant applied for secure installation
USA INDUSTRIALS
This threaded pipe cap is made of malleable iron and rated Class 150 for low-pressure applications up to 150 psi at 72°F. It is used to seal the end of a piping system, commonly in plumbing, HVAC, and process lines for maintenance or isolation. The fitting comes with thread sealant applied for secure installation
This 4-inch NPT threaded hex drive solid plug is made from 304 stainless steel and rated for a maximum operating pressure of 150 psi at 72°F (Class 150). It is used to seal threaded openings in low-pressure pipe systems, providing a secure closure in applications such as water, air, and chemical lines
USA INDUSTRIALS
This 4-inch NPT threaded hex drive solid plug is made from 304 stainless steel and rated for a maximum operating pressure of 150 psi at 72°F (Class 150). It is used to seal threaded openings in low-pressure pipe systems, providing a secure closure in applications such as water, air, and chemical lines
This 316 stainless steel hex drive solid plug seals unused ports in low-pressure piping systems. Rated for 150 psi @ 72°F and Class 150, it is suitable for industrial fluid handling, instrumentation, and general plumbing applications where a leak-tight closure is required
USA INDUSTRIALS
This 316 stainless steel hex drive solid plug seals unused ports in low-pressure piping systems. Rated for 150 psi @ 72°F and Class 150, it is suitable for industrial fluid handling, instrumentation, and general plumbing applications where a leak-tight closure is required
This 3/4 in NPT threaded solid plug features a hex drive for installation and is made from 316 stainless steel. Rated for 150 psi at 72°F (Class 150), it is used to seal unused ports in low-pressure piping systems. The plug comes pre-applied with thread sealant for a reliable NPT connection
USA INDUSTRIALS
This 3/4 in NPT threaded solid plug features a hex drive for installation and is made from 316 stainless steel. Rated for 150 psi at 72°F (Class 150), it is used to seal unused ports in low-pressure piping systems. The plug comes pre-applied with thread sealant for a reliable NPT connection

Lainnya dari USA INDUSTRIALS

Lihat semua USA INDUSTRIALS suku cadang →
This threaded pipe plug is made of malleable iron and rated for Class 150 service with a maximum operating pressure of 150 psi at 72°F. It is designed to seal threaded openings in low-pressure piping systems. Typical applications include water, air, and steam lines
USA INDUSTRIALS
This threaded pipe plug is made of malleable iron and rated for Class 150 service with a maximum operating pressure of 150 psi at 72°F. It is designed to seal threaded openings in low-pressure piping systems. Typical applications include water, air, and steam lines
This threaded plug is made of malleable iron and rated for Class 150 service with a maximum operating pressure of 150 psi at 72 °F. It includes thread sealant to help create leak-free connections. Commonly used to seal open ends in low-pressure industrial piping systems for water, air, or steam lines
USA INDUSTRIALS
This threaded plug is made of malleable iron and rated for Class 150 service with a maximum operating pressure of 150 psi at 72 °F. It includes thread sealant to help create leak-free connections. Commonly used to seal open ends in low-pressure industrial piping systems for water, air, or steam lines
This low-pressure threaded pipe fitting connects 1-1/4 in male NPT to 3/8 in female NPT lines in a straight configuration. Rated for 150 psi maximum operating pressure, it is used in plumbing, pneumatic, or hydraulic systems for air, water, or oil transfer. The fitting includes thread sealant for leak-resistant connections
USA INDUSTRIALS
This low-pressure threaded pipe fitting connects 1-1/4 in male NPT to 3/8 in female NPT lines in a straight configuration. Rated for 150 psi maximum operating pressure, it is used in plumbing, pneumatic, or hydraulic systems for air, water, or oil transfer. The fitting includes thread sealant for leak-resistant connections
This straight pipe fitting has male NPT threads on both ends, connecting 3/8 in and 1/4 in pipes in a straight line. Pre-applied thread sealant aids in creating a leak-resistant joint. Rated for 150 psi maximum operating pressure, it is used in low-pressure pneumatic, hydraulic, and fluid-handling systems
USA INDUSTRIALS
This straight pipe fitting has male NPT threads on both ends, connecting 3/8 in and 1/4 in pipes in a straight line. Pre-applied thread sealant aids in creating a leak-resistant joint. Rated for 150 psi maximum operating pressure, it is used in low-pressure pneumatic, hydraulic, and fluid-handling systems
This low-pressure threaded pipe fitting is a straight adapter with male NPT on one end and female NPT on the other, sized 3/4 in x 3/8 in. It is rated for a maximum operating pressure of 150 psi and includes thread sealant for leak-resistant joints. Commonly used in industrial plumbing, pneumatic, and hydraulic systems for connecting pipes of different sizes
USA INDUSTRIALS
This low-pressure threaded pipe fitting is a straight adapter with male NPT on one end and female NPT on the other, sized 3/4 in x 3/8 in. It is rated for a maximum operating pressure of 150 psi and includes thread sealant for leak-resistant joints. Commonly used in industrial plumbing, pneumatic, and hydraulic systems for connecting pipes of different sizes
This 2-inch NPT threaded hex drive solid plug is made from 304 stainless steel. It is rated for a maximum operating pressure of 150 psi at 72°F and is Class 150. The plug is used to seal open ends in low-pressure piping systems, such as water, air, or inert gas lines
USA INDUSTRIALS
This 2-inch NPT threaded hex drive solid plug is made from 304 stainless steel. It is rated for a maximum operating pressure of 150 psi at 72°F and is Class 150. The plug is used to seal open ends in low-pressure piping systems, such as water, air, or inert gas lines
This threaded plug is used to seal openings in low-pressure pipe systems. Made of malleable iron, it is rated for Class 150 and a maximum operating pressure of 150 psi at 72°F. Typical applications include water, air, and steam lines in plumbing, HVAC, and material handling systems
USA INDUSTRIALS
This threaded plug is used to seal openings in low-pressure pipe systems. Made of malleable iron, it is rated for Class 150 and a maximum operating pressure of 150 psi at 72°F. Typical applications include water, air, and steam lines in plumbing, HVAC, and material handling systems
This 45° elbow is a low-pressure threaded pipe fitting made of malleable iron. It has 1/4 in NPT threads on both ends and is rated for a maximum operating pressure of 150 psi. The fitting includes PTFE thread sealant for sealing. It is used in piping systems to redirect flow at a gradual angle, typical in air, water, or oil lines
USA INDUSTRIALS
This 45° elbow is a low-pressure threaded pipe fitting made of malleable iron. It has 1/4 in NPT threads on both ends and is rated for a maximum operating pressure of 150 psi. The fitting includes PTFE thread sealant for sealing. It is used in piping systems to redirect flow at a gradual angle, typical in air, water, or oil lines