Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
USA INDUSTRIALS Steker: 1 in, Berulir NPT, Steker Padat Heksagonal, Baja Tahan Karat 304, 150 psi @ 72°F - Low-Pressure Threaded Pipe Fittings with Thread Sealant
USA INDUSTRIALSLow-Pressure Threaded Pipe Fittings with Thread Sealant

USA INDUSTRIALS Steker: 1 in, Berulir NPT, Steker Padat Heksagonal, Baja Tahan Karat 304, 150 psi @ 72°F

USA INDUSTRIALS Plug 1 in adalah Low-Pressure Threaded Pipe Fittings dengan Thread Sealant yang dirancang untuk aplikasi perpipaan industri. Terbuat dari Stainless Steel 304, fitting ini memiliki tipe NPT Threaded…

SKU 3G-OTH-649426

Juga terdaftar sebagai: ZUSAPF23358 · ZUSA PF 23358

Merek
USA INDUSTRIALS
Item
Steker: 1 in, Berulir NPT, Steker Padat Heksagonal, Baja Tahan Karat 304, 150 psi @ 72°F
Kategori
Low-Pressure Threaded Pipe Fittings with Thread Sealant
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

USA INDUSTRIALS
Manufacturer Part Number
ZUSA-PF-23358
Type
NPT Threaded, Hex Drive Solid Plug, 150 psi @ 72°F, Class 150
Stainless Steel
304
Maximum Operating Pressure
150 psi @ 72 °F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

USA INDUSTRIALS Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

USA INDUSTRIALS Plug 1 in adalah Low-Pressure Threaded Pipe Fittings dengan Thread Sealant yang dirancang untuk aplikasi perpipaan industri. Terbuat dari Stainless Steel 304, fitting ini memiliki tipe NPT Threaded, Hex Drive Solid Plug dengan tekanan operasi maksimum 150 psi @ 72°F dan Class 150. Produk ini cocok untuk sistem perpipaan bertekanan rendah yang membutuhkan sambungan kedap udara dan tahan korosi, termasuk untuk kebutuhan suku cadang pembakar dan peralatan pembakaran di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi USA INDUSTRIALS Plug 1 in?

USA INDUSTRIALS Plug 1 in memiliki spesifikasi: tipe NPT Threaded, Hex Drive Solid Plug, material Stainless Steel 304, tekanan operasi maksimum 150 psi @ 72°F, dan Class 150. Produk ini dilengkapi Thread Sealant untuk sambungan kedap udara.

Untuk apa Plug 1 in USA INDUSTRIALS digunakan?

Plug 1 in USA INDUSTRIALS digunakan sebagai penutup sambungan pipa berulir NPT pada sistem perpipaan bertekanan rendah. Cocok untuk aplikasi industri seperti peralatan pembakaran, ketel uap, dan sistem pneumatik yang membutuhkan sambungan kedap udara dengan tekanan maksimum 150 psi @ 72°F.

Di mana beli USA INDUSTRIALS Plug 1 in di Indonesia?

Anda dapat membeli USA INDUSTRIALS Plug 1 in melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan untuk memastikan produk sampai ke lokasi proyek Anda.

Apa material USA INDUSTRIALS Plug 1 in?

USA INDUSTRIALS Plug 1 in terbuat dari Stainless Steel 304, yang memberikan ketahanan korosi baik untuk aplikasi industri umum. Material ini cocok untuk lingkungan dengan kelembaban tinggi atau kontak dengan air.

Bagaimana cara memilih Plug USA INDUSTRIALS yang tepat?

Pilih Plug USA INDUSTRIALS berdasarkan ukuran ulir NPT (1 in), tekanan operasi (maksimum 150 psi @ 72°F), dan material (Stainless Steel 304). Pastikan sistem perpipaan Anda memiliki Class 150 dan gunakan Thread Sealant untuk sambungan kedap udara.

Digunakan dalam

Aplikasi umum untuk USA INDUSTRIALS
Chemical processing — USA INDUSTRIALS FEP-encapsulated silicone cam-and-groove gaskets for corrosion-resistant sealing in coupling systems.
Food and beverage — USA INDUSTRIALS food-grade FKM cam-and-groove gaskets for sanitary fluid transfer in processing lines.
Water treatment — USA INDUSTRIALS 304 stainless steel gate valves for isolation in piping systems handling non-potable water.
Oil and gas — USA INDUSTRIALS brass ball valves for manual shut-off in low-pressure gas or fluid lines.
Pharmaceutical manufacturing — USA INDUSTRIALS 316 stainless steel globe valves for precise flow control in clean-room environments.
General industrial MRO — USA INDUSTRIALS polypropylene cam-and-groove fittings for temporary hose connections in plant maintenance.

USA INDUSTRIALS Produk

3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This 1-1/4 in NPT threaded hex drive solid plug is made of 304 stainless steel. It is rated for Class 150 with a maximum operating pressure of 150 psi at 72°F. The plug is used to seal threaded pipe openings in low-pressure systems, such as water, air, and chemical lines
USA INDUSTRIALS
This 1-1/4 in NPT threaded hex drive solid plug is made of 304 stainless steel. It is rated for Class 150 with a maximum operating pressure of 150 psi at 72°F. The plug is used to seal threaded pipe openings in low-pressure systems, such as water, air, and chemical lines
This 316 stainless steel hex drive solid plug seals unused ports in low-pressure piping systems. Rated for 150 psi @ 72°F and Class 150, it is suitable for industrial fluid handling, instrumentation, and general plumbing applications where a leak-tight closure is required
USA INDUSTRIALS
This 316 stainless steel hex drive solid plug seals unused ports in low-pressure piping systems. Rated for 150 psi @ 72°F and Class 150, it is suitable for industrial fluid handling, instrumentation, and general plumbing applications where a leak-tight closure is required
This 1/4 in threaded plug is made of malleable iron and rated for Class 150 service up to 150 psi at 72°F. It includes PTFE thread sealant for leak-free sealing. Commonly used to close unused openings in low-pressure plumbing, HVAC, and industrial piping systems
USA INDUSTRIALS
This 1/4 in threaded plug is made of malleable iron and rated for Class 150 service up to 150 psi at 72°F. It includes PTFE thread sealant for leak-free sealing. Commonly used to close unused openings in low-pressure plumbing, HVAC, and industrial piping systems
This malleable iron pipe plug features a 1/2 in NPT male thread and is rated for a maximum operating pressure of 150 psi at 72°F. It comes pre-applied with PTFE thread sealant for a reliable seal. Used to close threaded pipe openings in low-pressure air, water, and oil lines
USA INDUSTRIALS
This malleable iron pipe plug features a 1/2 in NPT male thread and is rated for a maximum operating pressure of 150 psi at 72°F. It comes pre-applied with PTFE thread sealant for a reliable seal. Used to close threaded pipe openings in low-pressure air, water, and oil lines
This low-pressure threaded pipe fitting features a 1-1/2 in x 1/8 in Male NPT Threaded x Female NPT Threaded straight configuration with a maximum operating pressure of 150 psi. It includes thread sealant for leak-resistant connections. Suitable for connecting and redirecting fluid or air lines in industrial systems such as instrumentation or control circuits
USA INDUSTRIALS
This low-pressure threaded pipe fitting features a 1-1/2 in x 1/8 in Male NPT Threaded x Female NPT Threaded straight configuration with a maximum operating pressure of 150 psi. It includes thread sealant for leak-resistant connections. Suitable for connecting and redirecting fluid or air lines in industrial systems such as instrumentation or control circuits
This straight pipe fitting connects a 1 in male NPT thread to a 1/4 in female NPT thread. It is rated for a maximum operating pressure of 150 psi and includes thread sealant for leak-resistant joints. Typical applications include low-pressure plumbing, pneumatic, and hydraulic systems
USA INDUSTRIALS
This straight pipe fitting connects a 1 in male NPT thread to a 1/4 in female NPT thread. It is rated for a maximum operating pressure of 150 psi and includes thread sealant for leak-resistant joints. Typical applications include low-pressure plumbing, pneumatic, and hydraulic systems

Lainnya dari USA INDUSTRIALS

Lihat semua USA INDUSTRIALS suku cadang →
This 304 stainless steel solid plug features a hex drive and NPT threads for sealing low-pressure pipe systems. Rated for 150 psi at 72°F and Class 150, it is supplied with thread sealant. Typical applications include closing threaded ports in plumbing, instrumentation, and hydraulic circuits
USA INDUSTRIALS
This 304 stainless steel solid plug features a hex drive and NPT threads for sealing low-pressure pipe systems. Rated for 150 psi at 72°F and Class 150, it is supplied with thread sealant. Typical applications include closing threaded ports in plumbing, instrumentation, and hydraulic circuits
This threaded pipe plug is made of malleable iron and rated for Class 150 service with a maximum operating pressure of 150 psi at 72°F. It includes a PTFE thread sealant for leak-free sealing. Commonly used to close off pipe ends in low-pressure plumbing, HVAC, and process piping systems
USA INDUSTRIALS
This threaded pipe plug is made of malleable iron and rated for Class 150 service with a maximum operating pressure of 150 psi at 72°F. It includes a PTFE thread sealant for leak-free sealing. Commonly used to close off pipe ends in low-pressure plumbing, HVAC, and process piping systems
Low-pressure threaded pipe fitting with thread sealant. Connects 3 in male NPT to 2-1/2 in female NPT piping in straight configurations. Rated for 150 psi maximum operating pressure. Suitable for water, air, or oil lines requiring a reducer
USA INDUSTRIALS
Low-pressure threaded pipe fitting with thread sealant. Connects 3 in male NPT to 2-1/2 in female NPT piping in straight configurations. Rated for 150 psi maximum operating pressure. Suitable for water, air, or oil lines requiring a reducer
This 90° threaded pipe elbow connects two 1/8 in pipes in low-pressure systems. Class 150 rated with a maximum operating pressure of 150 psi. Features threaded x threaded connections and PTFE thread sealant for leak-resistant assembly. Suitable for pneumatic, hydraulic, and instrumentation applications
USA INDUSTRIALS
This 90° threaded pipe elbow connects two 1/8 in pipes in low-pressure systems. Class 150 rated with a maximum operating pressure of 150 psi. Features threaded x threaded connections and PTFE thread sealant for leak-resistant assembly. Suitable for pneumatic, hydraulic, and instrumentation applications
This 3/4 in NPT threaded solid plug features a hex drive for installation and is made from 316 stainless steel. Rated for 150 psi at 72°F (Class 150), it is used to seal unused ports in low-pressure piping systems. The plug comes pre-applied with thread sealant for a reliable NPT connection
USA INDUSTRIALS
This 3/4 in NPT threaded solid plug features a hex drive for installation and is made from 316 stainless steel. Rated for 150 psi at 72°F (Class 150), it is used to seal unused ports in low-pressure piping systems. The plug comes pre-applied with thread sealant for a reliable NPT connection
This low-pressure threaded pipe fitting features a male NPT threaded end and a female NPT threaded end in a straight configuration. It is used to connect pipes or adapt between different sizes in plumbing, HVAC, and industrial piping systems. The fitting has a maximum operating pressure of 150 psi and includes thread sealant
USA INDUSTRIALS
This low-pressure threaded pipe fitting features a male NPT threaded end and a female NPT threaded end in a straight configuration. It is used to connect pipes or adapt between different sizes in plumbing, HVAC, and industrial piping systems. The fitting has a maximum operating pressure of 150 psi and includes thread sealant
This threaded plug is made of malleable iron and rated for 150 psi at 72°F. It is used to seal open ends in low-pressure piping systems, such as water, air, and steam lines. The Class 150 design ensures compatibility with standard threaded fittings
USA INDUSTRIALS
This threaded plug is made of malleable iron and rated for 150 psi at 72°F. It is used to seal open ends in low-pressure piping systems, such as water, air, and steam lines. The Class 150 design ensures compatibility with standard threaded fittings
This 4-inch NPT threaded hex drive solid plug is made from 304 stainless steel and rated for a maximum operating pressure of 150 psi at 72°F (Class 150). It is used to seal threaded openings in low-pressure pipe systems, providing a secure closure in applications such as water, air, and chemical lines
USA INDUSTRIALS
This 4-inch NPT threaded hex drive solid plug is made from 304 stainless steel and rated for a maximum operating pressure of 150 psi at 72°F (Class 150). It is used to seal threaded openings in low-pressure pipe systems, providing a secure closure in applications such as water, air, and chemical lines