Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
VEKTEK VGP-240-C2-DP Two-Finger Parallel Gripper - Two-Finger Parallel Grippers
VEKTEKTwo-Finger Parallel Grippers

VEKTEK VGP-240-C2-DP Two-Finger Parallel Gripper

VEKTEK VGP-240-C2-DP adalah Two-Finger Parallel Grippers yang dirancang untuk aplikasi End of Arm Tooling dengan stroke 17 mm. Gripper ini beroperasi pada tekanan 2 bar hingga 8 bar, dengan tekanan operasi maksimum 8…

SKU 3G-OTH-623008

Juga terdaftar sebagai: VGP240C2DP · VGP 240 C2 DP

Merek
VEKTEK
Item
VGP-240-C2-DP Two-Finger Parallel Gripper
Kategori
Two-Finger Parallel Grippers
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VEKTEK
Manufacturer Part Number
VGP-240-C2-DP
Type
2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VEKTEK Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

VEKTEK VGP-240-C2-DP adalah Two-Finger Parallel Grippers yang dirancang untuk aplikasi End of Arm Tooling dengan stroke 17 mm. Gripper ini beroperasi pada tekanan 2 bar hingga 8 bar, dengan tekanan operasi maksimum 8 bar dan minimum 2 bar, serta memiliki tingkat perlindungan IP40. Produk ini merupakan bagian dari seri VGP yang andal untuk kebutuhan otomatisasi industri Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi VEKTEK VGP-240-C2-DP?

VEKTEK VGP-240-C2-DP adalah Two-Finger Parallel Grippers dengan stroke 17 mm. Spesifikasi teknisnya meliputi tekanan operasi 2 bar hingga 8 bar, tekanan maksimum 8 bar, tekanan minimum 2 bar, dan tingkat perlindungan IP40.

Untuk apa VEKTEK VGP-240-C2-DP digunakan?

VEKTEK VGP-240-C2-DP digunakan sebagai End of Arm Tooling pada lengan robot atau aktuator pneumatik untuk menggenggam objek. Dengan dua jari paralel dan stroke 17 mm, gripper ini cocok untuk aplikasi pick-and-place di industri manufaktur dan otomatisasi.

Di mana beli VEKTEK VGP-240-C2-DP di Indonesia?

Anda dapat membeli VEKTEK VGP-240-C2-DP melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih VEKTEK VGP-240-C2-DP yang tepat?

Pastikan tekanan operasi sistem Anda sesuai dengan spesifikasi VGP-240-C2-DP, yaitu antara 2 bar hingga 8 bar, dengan tekanan maksimum 8 bar. Periksa juga stroke 17 mm dan tingkat perlindungan IP40 untuk memastikan kesesuaian dengan lingkungan aplikasi Anda.

Digunakan dalam

Aplikasi umum untuk VEKTEK
Machining centers — VEKTEK zero point system fixture plates for quick workpiece changeover
Robotic assembly — VEKTEK robot coupler PQ9020 for EOAT interfaces on ISO 31.5-4-M5 flanges
Workholding — VEKTEK swing clamp hydraulic cylinders for clamping parts during milling operations
Automated gripping — VEKTEK parallel gripper jaw blanks for custom jaw fabrication in VGP/VZP series
Fixture setup — VEKTEK zero point system pull studs for securing workpieces to subplates
Tooling change — VEKTEK quick-change jaw adapters for rapid gripper jaw replacement in VY series

VEKTEK Produk

3G Electric memasok VEKTEK two-finger parallel grippers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari VEKTEK

Lihat semua VEKTEK suku cadang →
Two-finger parallel gripper for end-of-arm tooling. Operates from 2.5 bar to 8 bar with 8 bar maximum operating pressure. Overall length 56 mm. Suitable for pick-and-place, assembly, and material handling tasks in automated manufacturing
VEKTEK
Two-finger parallel gripper for end-of-arm tooling. Operates from 2.5 bar to 8 bar with 8 bar maximum operating pressure. Overall length 56 mm. Suitable for pick-and-place, assembly, and material handling tasks in automated manufacturing
Pneumatic two-finger parallel gripper with 20 mm stroke. Operates on compressed air from 2 bar to 8 bar, with maximum 8 bar. IP40 rated. Suitable for end-of-arm tooling in pick-and-place, assembly, and material handling tasks
VEKTEK
Pneumatic two-finger parallel gripper with 20 mm stroke. Operates on compressed air from 2 bar to 8 bar, with maximum 8 bar. IP40 rated. Suitable for end-of-arm tooling in pick-and-place, assembly, and material handling tasks
Two-finger parallel gripper for end-of-arm tooling. 8 mm stroke length. Operating pressure range 2 bar to 8 bar. IP40 rating. Suitable for pick-and-place, assembly, and machine tending applications
VEKTEK
Two-finger parallel gripper for end-of-arm tooling. 8 mm stroke length. Operating pressure range 2 bar to 8 bar. IP40 rating. Suitable for pick-and-place, assembly, and machine tending applications
Pneumatic two-finger parallel gripper with 5 mm stroke length. Operates on compressed air from 2 bar to 8 bar, with a maximum operating pressure of 8 bar. Suitable for end-of-arm tooling in automated pick-and-place, assembly, and part handling applications
VEKTEK
Pneumatic two-finger parallel gripper with 5 mm stroke length. Operates on compressed air from 2 bar to 8 bar, with a maximum operating pressure of 8 bar. Suitable for end-of-arm tooling in automated pick-and-place, assembly, and part handling applications
Pneumatic two-finger parallel gripper with 13 mm stroke. Operates at 2 bar to 8 bar (8 bar max, 2 bar min). IP40 rated. Suitable for end-of-arm tooling in pick-and-place, assembly, and material handling applications
VEKTEK
Pneumatic two-finger parallel gripper with 13 mm stroke. Operates at 2 bar to 8 bar (8 bar max, 2 bar min). IP40 rated. Suitable for end-of-arm tooling in pick-and-place, assembly, and material handling applications
Pneumatic two-finger parallel gripper with 3 mm stroke, operating at 2 to 8 bar. Suitable for end-of-arm tooling in automation applications such as pick-and-place, assembly, and part handling
VEKTEK
Pneumatic two-finger parallel gripper with 3 mm stroke, operating at 2 to 8 bar. Suitable for end-of-arm tooling in automation applications such as pick-and-place, assembly, and part handling
Pneumatic two-finger parallel gripper with 35 mm stroke. Operates on compressed air from 2 bar to 8 bar, with maximum pressure 8 bar and minimum 2 bar. IP40 rated. Used for robotic pick-and-place, assembly, and material handling in automated manufacturing cells
VEKTEK
Pneumatic two-finger parallel gripper with 35 mm stroke. Operates on compressed air from 2 bar to 8 bar, with maximum pressure 8 bar and minimum 2 bar. IP40 rated. Used for robotic pick-and-place, assembly, and material handling in automated manufacturing cells
Pneumatic two-finger parallel gripper with 4 mm stroke. Operates from 2.5 bar to 8 bar. IP67 rated. Suitable for end-of-arm tooling in pick-and-place, assembly, and part handling applications
VEKTEK
Pneumatic two-finger parallel gripper with 4 mm stroke. Operates from 2.5 bar to 8 bar. IP67 rated. Suitable for end-of-arm tooling in pick-and-place, assembly, and part handling applications