Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
VEKTEK VGP-40-C1 Two-Finger Parallel Gripper - Two-Finger Parallel Grippers
VEKTEKTwo-Finger Parallel Grippers

VEKTEK VGP-40-C1 Two-Finger Parallel Gripper

Gripper paralel dua jari VEKTEK seri VGP-40-C1 ini dirancang untuk aplikasi end-of-arm tooling pada lengan robot industri. Dengan tekanan operasi 2 bar hingga 8 bar (maksimum 8 bar), gripper ini menawarkan stroke…

SKU 3G-OTH-623055

Juga terdaftar sebagai: VGP40C1 · VGP 40 C1

Merek
VEKTEK
Item
VGP-40-C1 Two-Finger Parallel Gripper
Kategori
Two-Finger Parallel Grippers
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VEKTEK
Manufacturer Part Number
VGP-40-C1
Type
2 bar to 8 bar, 8 bar Max Op Pressure, 2 bar Min Op Pressure

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VEKTEK Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Gripper paralel dua jari VEKTEK seri VGP-40-C1 ini dirancang untuk aplikasi end-of-arm tooling pada lengan robot industri. Dengan tekanan operasi 2 bar hingga 8 bar (maksimum 8 bar), gripper ini menawarkan stroke panjang 2.5 mm yang presisi untuk penanganan komponen kecil. Tingkat perlindungan IP40 memastikan keandalan di lingkungan pabrik yang terkontrol. Cari gripper pneumatik untuk robot? VGP-40-C1 adalah pilihan tepat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi gripper VEKTEK VGP-40-C1?

Gripper VEKTEK VGP-40-C1 adalah gripper paralel dua jari dengan tekanan operasi 2 bar hingga 8 bar (maksimum 8 bar). Memiliki stroke panjang 2.5 mm dan tingkat perlindungan IP40. Tipe produk ini adalah VGP dengan nomor komponen VGP-40-C1.

Untuk apa gripper VEKTEK VGP-40-C1 digunakan?

Gripper VEKTEK VGP-40-C1 digunakan sebagai end-of-arm tooling pada lengan robot industri untuk menggenggam dan memindahkan komponen kecil. Dengan tekanan operasi 2 bar hingga 8 bar, gripper ini cocok untuk aplikasi perakitan, penanganan material, dan otomatisasi pabrik.

Di mana beli gripper VEKTEK VGP-40-C1 di Indonesia?

Anda dapat membeli gripper VEKTEK VGP-40-C1 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih gripper VEKTEK yang tepat?

Pilih gripper VEKTEK berdasarkan tekanan operasi, stroke, dan kapasitas genggaman. Untuk VGP-40-C1, pastikan sistem pneumatik Anda mendukung tekanan 2 bar hingga 8 bar (maksimum 8 bar) dan stroke 2.5 mm sesuai kebutuhan aplikasi end-of-arm tooling Anda.

Digunakan dalam

Aplikasi umum untuk VEKTEK
Machining centers — VEKTEK zero point system fixture plates for quick workpiece changeover
Robotic assembly — VEKTEK robot coupler PQ9020 for EOAT interfaces on ISO 31.5-4-M5 flanges
Workholding — VEKTEK swing clamp hydraulic cylinders for clamping parts during milling operations
Automated gripping — VEKTEK parallel gripper jaw blanks for custom jaw fabrication in VGP/VZP series
Fixture setup — VEKTEK zero point system pull studs for securing workpieces to subplates
Tooling change — VEKTEK quick-change jaw adapters for rapid gripper jaw replacement in VY series

VEKTEK Produk

3G Electric memasok VEKTEK two-finger parallel grippers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari VEKTEK

Lihat semua VEKTEK suku cadang →
The VEKTEK VGP-50-C2 is a VGP Series two-finger parallel gripper for end-of-arm tooling. It operates at 2 bar to 8 bar with a 2 mm stroke length and IP40 rating. Suitable for pick-and-place, assembly, and material handling tasks in industrial automation
VEKTEK
The VEKTEK VGP-50-C2 is a VGP Series two-finger parallel gripper for end-of-arm tooling. It operates at 2 bar to 8 bar with a 2 mm stroke length and IP40 rating. Suitable for pick-and-place, assembly, and material handling tasks in industrial automation
Pneumatic two-finger parallel gripper with 4 mm stroke length. Operates at 2 bar to 8 bar, with maximum operating pressure of 8 bar and minimum of 2 bar. IP40 rated. Used in end-of-arm tooling for pick-and-place, assembly, and part handling in automated manufacturing
VEKTEK
Pneumatic two-finger parallel gripper with 4 mm stroke length. Operates at 2 bar to 8 bar, with maximum operating pressure of 8 bar and minimum of 2 bar. IP40 rated. Used in end-of-arm tooling for pick-and-place, assembly, and part handling in automated manufacturing
Pneumatic two-finger parallel gripper with 8 mm stroke. Operates at 2 bar to 8 bar, with maximum pressure of 8 bar and minimum of 2 bar. IP40 rated. Suitable for end-of-arm tooling in automation applications such as pick-and-place, assembly, and material handling
VEKTEK
Pneumatic two-finger parallel gripper with 8 mm stroke. Operates at 2 bar to 8 bar, with maximum pressure of 8 bar and minimum of 2 bar. IP40 rated. Suitable for end-of-arm tooling in automation applications such as pick-and-place, assembly, and material handling
Two-finger parallel gripper with 6 mm stroke, operating pressure range 2.5 bar to 8 bar, maximum 8 bar. IP67 rated. Suitable for end-of-arm tooling in automated pick-and-place, assembly, and material handling applications
VEKTEK
Two-finger parallel gripper with 6 mm stroke, operating pressure range 2.5 bar to 8 bar, maximum 8 bar. IP67 rated. Suitable for end-of-arm tooling in automated pick-and-place, assembly, and material handling applications
Pneumatic two-finger parallel gripper for end-of-arm tooling. Stroke length 6 mm. Operating pressure range 2 bar to 8 bar. IP40 protection rating
VEKTEK
Pneumatic two-finger parallel gripper for end-of-arm tooling. Stroke length 6 mm. Operating pressure range 2 bar to 8 bar. IP40 protection rating
Two-finger parallel gripper for end-of-arm tooling. Operates at 2.5 bar to 8 bar with 8 bar maximum pressure. Overall length 198 mm. Suitable for pick-and-place, assembly, and part handling in automated manufacturing
VEKTEK
Two-finger parallel gripper for end-of-arm tooling. Operates at 2.5 bar to 8 bar with 8 bar maximum pressure. Overall length 198 mm. Suitable for pick-and-place, assembly, and part handling in automated manufacturing
Pneumatic two-finger parallel gripper with 10 mm stroke, operating pressure 2.5 bar to 8 bar (max 8 bar), overall length 122.5 mm, IP67 rated. Used for end-of-arm tooling in automated pick-and-place and part handling applications
VEKTEK
Pneumatic two-finger parallel gripper with 10 mm stroke, operating pressure 2.5 bar to 8 bar (max 8 bar), overall length 122.5 mm, IP67 rated. Used for end-of-arm tooling in automated pick-and-place and part handling applications
Pneumatic two-finger parallel gripper with 14 mm stroke, operating at 2 bar to 8 bar. Max operating pressure 8 bar, min 2 bar. IP40 rated. Used in end-of-arm tooling for pick-and-place, assembly, and material handling
VEKTEK
Pneumatic two-finger parallel gripper with 14 mm stroke, operating at 2 bar to 8 bar. Max operating pressure 8 bar, min 2 bar. IP40 rated. Used in end-of-arm tooling for pick-and-place, assembly, and material handling