VELCRO BRAND Hook-and-Loop Fastener: Disc, 7/8 in Overall Dia, Hook, Black, Adhesive
The VELCRO BRAND Hook-and-Loop Fastener is a pre-cut disc (7/8 in overall diameter) made of nylon with a black hook surface and an acrylic adhesive backing. This SKU (5JLD1, MPN 192339) provides a ready-to-use…
SKU 3G-OTH-524940
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VELCRO BRAND Hook-and-Loop Fastener is a pre-cut disc (7/8 in overall diameter) made of nylon with a black hook surface and an acrylic adhesive backing. This SKU (5JLD1, MPN 192339) provides a ready-to-use fastening solution for light-duty mounting or temporary attachment applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the VELCRO BRAND Hook-and-Loop Fastener disc used for?
This 7/8 in diameter pre-cut disc is used for light-duty mounting, temporary attachment, or cable management in industrial, commercial, and office settings. The acrylic adhesive backing bonds to smooth surfaces, while the nylon hook side mates with loop material for repeated fastening cycles.
What are the specifications of the VELCRO BRAND 192339 disc?
The VELCRO BRAND 192339 disc has a 7/8 in overall diameter, is made of nylon, and features a black hook surface with an acrylic adhesive backing. It is a pre-cut, ready-to-use fastener for light-duty applications. The material is nylon, and the type is Hook, Black, Adhesive, Acrylic, Nylon.
Where to buy VELCRO BRAND 192339 hook-and-loop discs worldwide?
3G Electric supplies the VELCRO BRAND 192339 hook-and-loop disc to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this nylon pre-cut disc with acrylic adhesive backing.
How to install the VELCRO BRAND adhesive disc?
Clean the mounting surface thoroughly with isopropyl alcohol to remove dust and oil. Peel the liner from the acrylic adhesive backing, press the disc firmly onto the surface, and hold for 30 seconds. Allow 24 hours at room temperature for full bond strength before applying load.
Digunakan dalam
Aplikasi umum untuk VELCRO BRANDVELCRO BRAND Produk
3G Electric memasok VELCRO BRAND pre-cut discs. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









