Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
VERMONT GAGE Class X No-Go (Minus) Pin Gauge - 0.0100 in Diameter - Class X No-Go (Minus) Pin Gauges - Dia. 0.0040 in to 0.0750 in
VERMONT GAGEClass X No-Go (Minus) Pin Gauges - Dia. 0.0040 in to 0.0750 in

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - 0.0100 in Diameter

VERMONT GAGE menghadirkan Class X No-Go Pin Gauge dengan diameter 0.0100 inci, dirancang untuk inspeksi presisi tinggi pada komponen mekanis. Alat ukur ini memiliki toleransi super ketat 0.00004 inci dan terbuat dari…

SKU 3G-OTH-278520

Merek
VERMONT GAGE
Item
Class X No-Go
Kategori
Class X No-Go (Minus) Pin Gauges - Dia. 0.0040 in to 0.0750 in
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VERMONT GAGE
Manufacturer Part Number
141201000
Type
2 in, Uncoated Steel
Tolerance
0.00004 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VERMONT GAGE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

VERMONT GAGE menghadirkan Class X No-Go Pin Gauge dengan diameter 0.0100 inci, dirancang untuk inspeksi presisi tinggi pada komponen mekanis. Alat ukur ini memiliki toleransi super ketat 0.00004 inci dan terbuat dari baja tanpa lapisan (uncoated steel) sepanjang 2 inci. Setiap gauge dilengkapi Certificate of Accuracy dengan NIST Traceability, menjadikannya pilihan andal untuk aplikasi quality control di industri manufaktur dan permesinan Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi VERMONT GAGE Class X No-Go Pin Gauge 0.0100 in?

Pin gauge ini berfungsi sebagai alat ukur No-Go (minus) untuk memeriksa diameter lubang atau celah. Jika gauge masuk ke lubang, maka komponen dinyatakan tidak lolos (reject). Dengan toleransi 0.00004 inci dan diameter 0.0100 inci, gauge ini memastikan akurasi tinggi dalam inspeksi kualitas.

Apa spesifikasi teknis VERMONT GAGE Class X No-Go Pin Gauge 141201000?

Spesifikasi: diameter 0.0100 inci, tipe No-Go (minus), panjang 2 inci, material baja tanpa lapisan (uncoated steel), toleransi 0.00004 inci, dan dilengkapi Certificate of Accuracy dengan NIST Traceability. Nomor part pabrikan adalah 141201000.

Di mana beli VERMONT GAGE Class X No-Go Pin Gauge di Indonesia?

Anda dapat membeli VERMONT GAGE Class X No-Go Pin Gauge 0.0100 in melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih pin gauge yang tepat untuk inspeksi?

Pilih pin gauge berdasarkan diameter yang ingin diukur dan toleransi yang dibutuhkan. Untuk aplikasi presisi tinggi, gunakan Class X dengan toleransi 0.00004 inci seperti VERMONT GAGE ini. Pastikan gauge memiliki sertifikat kalibrasi traceable ke NIST untuk akurasi terjamin.

Digunakan dalam

Aplikasi umum untuk VERMONT GAGE
Automotive manufacturing — VERMONT GAGE Class X pin gauges for inspecting engine cylinder bore diameters after honing.
Aerospace machining — VERMONT GAGE No-Go pin gauges for verifying hole tolerances in aircraft structural components.
Tool and die maintenance — VERMONT GAGE drill blanks used as reference pins for aligning dies and fixtures.
Quality control labs — VERMONT GAGE Class X pin gauges for calibrating bore gauges and micrometers.
General metalworking — VERMONT GAGE Go pin gauges for checking slot widths in machined parts.
Custom gage making — VERMONT GAGE high-speed steel drill blanks as raw material for fabricating custom inspection plugs.

VERMONT GAGE Produk

3G Electric memasok VERMONT GAGE class x no-go (minus) pin gauges - dia. 0.0040 in to 0.0750 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Class X No-Go (Minus) pin gauge with 0.0101 in diameter and 0.00004 in tolerance. Made of uncoated steel, 2 in length. Used for go/no-go inspection to verify that hole diameters do not exceed the specified size in quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.0101 in diameter and 0.00004 in tolerance. Made of uncoated steel, 2 in length. Used for go/no-go inspection to verify that hole diameters do not exceed the specified size in quality control applications
Class X No-Go (Minus) pin gauge with 0.0102 in diameter, 2 in length, and 0.00004 in tolerance. Made of uncoated steel. Used for go/no-go inspection of hole diameters to ensure parts do not exceed maximum allowable size
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.0102 in diameter, 2 in length, and 0.00004 in tolerance. Made of uncoated steel. Used for go/no-go inspection of hole diameters to ensure parts do not exceed maximum allowable size
Class X No-Go (Minus) pin gauge with 0.0103 inch diameter and 0.00004 inch tolerance. Made of uncoated steel, 2 inches long. Used for go/no-go dimensional inspection of holes and bores to verify maximum allowable diameter is not exceeded
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.0103 inch diameter and 0.00004 inch tolerance. Made of uncoated steel, 2 inches long. Used for go/no-go dimensional inspection of holes and bores to verify maximum allowable diameter is not exceeded
Class X No-Go (minus) pin gauge with a diameter of 0.0104 inches, 2-inch length, and tolerance of 0.00004 inches. Made of uncoated steel. Used for go/no-go inspection of small holes and slots in precision machining and quality control to verify that hole diameters do not exceed the specified size
VERMONT GAGE
Class X No-Go (minus) pin gauge with a diameter of 0.0104 inches, 2-inch length, and tolerance of 0.00004 inches. Made of uncoated steel. Used for go/no-go inspection of small holes and slots in precision machining and quality control to verify that hole diameters do not exceed the specified size
Class X No-Go (Minus) pin gauge with a diameter of 0.0109 in and a tolerance of 0.00004 in. Made of uncoated steel with a length of 2 in. Used to verify that a hole does not exceed the specified upper size limit; the No-Go member should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.0109 in and a tolerance of 0.00004 in. Made of uncoated steel with a length of 2 in. Used to verify that a hole does not exceed the specified upper size limit; the No-Go member should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. Made of uncoated steel with a tolerance of 0.00004 in, it is suitable for precision inspection in quality control applications. Includes a Certificate of Accuracy with NIST Traceability
VERMONT GAGE
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. Made of uncoated steel with a tolerance of 0.00004 in, it is suitable for precision inspection in quality control applications. Includes a Certificate of Accuracy with NIST Traceability

Lainnya dari VERMONT GAGE

Lihat semua VERMONT GAGE suku cadang →
This Class X No-Go (Minus) pin gauge has a diameter of 0.0723 in and a tolerance of 0.00004 in. It is made of uncoated steel and measures 2 in in length. Used to verify that a hole does not exceed the specified diameter; the gauge should not enter the hole if the hole is within tolerance. Includes a Certificate of Accuracy with NIST Traceability
VERMONT GAGE
This Class X No-Go (Minus) pin gauge has a diameter of 0.0723 in and a tolerance of 0.00004 in. It is made of uncoated steel and measures 2 in in length. Used to verify that a hole does not exceed the specified diameter; the gauge should not enter the hole if the hole is within tolerance. Includes a Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge, 0.0647 in diameter, 2 in length, uncoated steel. Tolerance of 0.00004 in. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the specified size
VERMONT GAGE
Class X No-Go (Minus) pin gauge, 0.0647 in diameter, 2 in length, uncoated steel. Tolerance of 0.00004 in. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the specified size
This Class X No-Go (Minus) pin gauge is used for precision dimensional inspection to verify that a hole diameter does not exceed 0.0579 in. Made of uncoated steel with a tolerance of 0.00004 in and a length of 2 in, it is suitable for go/no-go gauging applications in manufacturing and quality control
VERMONT GAGE
This Class X No-Go (Minus) pin gauge is used for precision dimensional inspection to verify that a hole diameter does not exceed 0.0579 in. Made of uncoated steel with a tolerance of 0.00004 in and a length of 2 in, it is suitable for go/no-go gauging applications in manufacturing and quality control
Class X No-Go (Minus) pin gauge with 0.0643 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used to verify that a hole does not exceed the specified upper diameter limit; if the gauge enters, the part is rejected. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.0643 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used to verify that a hole does not exceed the specified upper diameter limit; if the gauge enters, the part is rejected. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (minus) pin gauge with 0.0524 in diameter, 2 in length, uncoated steel. Tolerance of 0.00004 in. Used to verify maximum hole diameter in precision machining and quality control applications
VERMONT GAGE
Class X No-Go (minus) pin gauge with 0.0524 in diameter, 2 in length, uncoated steel. Tolerance of 0.00004 in. Used to verify maximum hole diameter in precision machining and quality control applications
Class X No-Go (minus) pin gauge with a diameter of 0.0153 inches and a tolerance of 0.00004 inches. Made from uncoated steel, this gauge is used to verify that a hole does not exceed its maximum allowable size. Includes a Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (minus) pin gauge with a diameter of 0.0153 inches and a tolerance of 0.00004 inches. Made from uncoated steel, this gauge is used to verify that a hole does not exceed its maximum allowable size. Includes a Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge, 0.0042 in diameter, 2 in length, uncoated steel, with tolerance of 0.00004 in. Used for go/no-go dimensional inspection of small holes and features in machining and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge, 0.0042 in diameter, 2 in length, uncoated steel, with tolerance of 0.00004 in. Used for go/no-go dimensional inspection of small holes and features in machining and quality control applications
Class X No-Go (Minus) pin gauge with 0.0449 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used for go/no-go gaging to verify that hole diameters do not exceed the upper tolerance limit in precision measurement applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.0449 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used for go/no-go gaging to verify that hole diameters do not exceed the upper tolerance limit in precision measurement applications