Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
VERMONT GAGE Kelas X Pin Gauge No-Go: Dia 0.1150 in, Toleransi 0.00004 in, 2 in - Class X No-Go (Minus) Pin Gauges - Dia. 0.0751 in to 0.2810 in
VERMONT GAGEClass X No-Go (Minus) Pin Gauges - Dia. 0.0751 in to 0.2810 in

VERMONT GAGE Kelas X Pin Gauge No-Go: Dia 0.1150 in, Toleransi 0.00004 in, 2 in

VERMONT GAGE Class X No-Go Pin Gauge dengan diameter 0.1150 in adalah alat ukur presisi tinggi yang dirancang untuk memeriksa toleransi lubang secara akurat. Pin gauge ini memiliki toleransi ketat 0.00004 in dan…

SKU 3G-OTH-282992

Merek
VERMONT GAGE
Item
Kelas X Pin Gauge No-Go: Dia 0.1150 in, Toleransi 0.00004 in, 2 in
Kategori
Class X No-Go (Minus) Pin Gauges - Dia. 0.0751 in to 0.2810 in
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VERMONT GAGE
Manufacturer Part Number
141211500
Type
2 in, Uncoated Steel
Tolerance
0.00004 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VERMONT GAGE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

VERMONT GAGE Class X No-Go Pin Gauge dengan diameter 0.1150 in adalah alat ukur presisi tinggi yang dirancang untuk memeriksa toleransi lubang secara akurat. Pin gauge ini memiliki toleransi ketat 0.00004 in dan terbuat dari baja tanpa lapisan (uncoated steel) untuk ketahanan aus yang optimal. Setiap produk dilengkapi dengan Certificate of Accuracy dengan NIST Traceability, memastikan keandalan hasil pengukuran Anda. Cocok digunakan sebagai alat inspeksi di industri manufaktur dan permesinan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi VERMONT GAGE Class X No-Go Pin Gauge 0.1150 in?

VERMONT GAGE Class X No-Go Pin Gauge ini memiliki diameter 0.1150 in dengan toleransi 0.00004 in. Terbuat dari baja tanpa lapisan (uncoated steel) dan termasuk dalam kategori Class X No-Go (Minus) Pin Gauges untuk diameter 0.0751 in hingga 0.2810 in. Setiap produk disertai Certificate of Accuracy dengan NIST Traceability.

Untuk apa VERMONT GAGE Class X No-Go Pin Gauge digunakan?

Pin gauge ini digunakan untuk memeriksa toleransi lubang dengan metode no-go, memastikan bahwa lubang tidak melebihi batas maksimum yang diizinkan. Sangat penting dalam proses quality control di industri manufaktur, permesinan, dan fabrikasi untuk menjamin akurasi dimensi komponen.

Bagaimana cara memilih pin gauge yang tepat?

Pilih pin gauge berdasarkan diameter lubang yang akan diperiksa dan toleransi yang dibutuhkan. VERMONT GAGE Class X No-Go Pin Gauge dengan diameter 0.1150 in dan toleransi 0.00004 in cocok untuk aplikasi presisi tinggi. Pastikan Anda memilih tipe no-go (minus) untuk memeriksa batas maksimum lubang.

Di mana beli VERMONT GAGE Class X No-Go Pin Gauge di Indonesia?

Anda dapat membeli VERMONT GAGE Class X No-Go Pin Gauge diameter 0.1150 in melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda dengan aman.

Digunakan dalam

Aplikasi umum untuk VERMONT GAGE
Automotive manufacturing — VERMONT GAGE Class X pin gauges for inspecting engine cylinder bore diameters after honing.
Aerospace machining — VERMONT GAGE No-Go pin gauges for verifying hole tolerances in aircraft structural components.
Tool and die maintenance — VERMONT GAGE drill blanks used as reference pins for aligning dies and fixtures.
Quality control labs — VERMONT GAGE Class X pin gauges for calibrating bore gauges and micrometers.
General metalworking — VERMONT GAGE Go pin gauges for checking slot widths in machined parts.
Custom gage making — VERMONT GAGE high-speed steel drill blanks as raw material for fabricating custom inspection plugs.

VERMONT GAGE Produk

3G Electric memasok VERMONT GAGE class x no-go (minus) pin gauges - dia. 0.0751 in to 0.2810 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Class X No-Go (Minus) pin gauge with 0.1153 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for go/no-go dimensional verification of holes to ensure they do not exceed the specified size in machining and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.1153 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for go/no-go dimensional verification of holes to ensure they do not exceed the specified size in machining and quality control applications
Class X No-Go (Minus) pin gauge with 0.1151 in diameter, 0.00004 in tolerance, 2 in length, uncoated steel. Used as a no-go limit to verify that hole diameters do not exceed the specified size in precision machining and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.1151 in diameter, 0.00004 in tolerance, 2 in length, uncoated steel. Used as a no-go limit to verify that hole diameters do not exceed the specified size in precision machining and quality control applications
Class X No-Go (Minus) pin gauge, 0.1152 in diameter, 2 in length, uncoated steel, tolerance 0.00004 in. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed maximum allowable size
VERMONT GAGE
Class X No-Go (Minus) pin gauge, 0.1152 in diameter, 2 in length, uncoated steel, tolerance 0.00004 in. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed maximum allowable size
Class X No-Go (minus) pin gauge with a diameter of 0.1154 inches and a tolerance of 0.00004 inches. Made from uncoated steel with a 2-inch length. Used to verify that a hole does not exceed its maximum allowable size in quality control and inspection applications
VERMONT GAGE
Class X No-Go (minus) pin gauge with a diameter of 0.1154 inches and a tolerance of 0.00004 inches. Made from uncoated steel with a 2-inch length. Used to verify that a hole does not exceed its maximum allowable size in quality control and inspection applications
Class X No-Go (Minus) pin gauge with diameter 0.1157 in, tolerance 0.00004 in, 2 in length, uncoated steel. Used for go/no-go dimensional verification of hole diameters to ensure holes do not exceed specified size
VERMONT GAGE
Class X No-Go (Minus) pin gauge with diameter 0.1157 in, tolerance 0.00004 in, 2 in length, uncoated steel. Used for go/no-go dimensional verification of hole diameters to ensure holes do not exceed specified size
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable diameter. Made of uncoated steel with a tolerance of 0.00004 in, it is 2 in long and includes a Certificate of Accuracy with NIST Traceability. Suitable for quality control in machining and manufacturing applications
VERMONT GAGE
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable diameter. Made of uncoated steel with a tolerance of 0.00004 in, it is 2 in long and includes a Certificate of Accuracy with NIST Traceability. Suitable for quality control in machining and manufacturing applications

Lainnya dari VERMONT GAGE

Lihat semua VERMONT GAGE suku cadang →
Class X No-Go (Minus) pin gauge with 0.1624 in diameter, 2 in length, and ±0.00004 in tolerance. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the specified upper limit in machining and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.1624 in diameter, 2 in length, and ±0.00004 in tolerance. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the specified upper limit in machining and quality control applications
Class X No-Go (Minus) pin gauge with diameter 0.1294 in, tolerance ±0.00004 in, length 2 in, uncoated steel. Used for go/no-go dimensional inspection of hole minimum diameters in manufacturing and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with diameter 0.1294 in, tolerance ±0.00004 in, length 2 in, uncoated steel. Used for go/no-go dimensional inspection of hole minimum diameters in manufacturing and quality control applications
VERMONT GAGE Class X No-Go (Minus) Pin Gauge, diameter 0.2090 in, 2 in length, uncoated steel, tolerance 0.00004 in. Used to verify that a hole does not exceed its specified upper size limit in precision machining and quality control applications
VERMONT GAGE
VERMONT GAGE Class X No-Go (Minus) Pin Gauge, diameter 0.2090 in, 2 in length, uncoated steel, tolerance 0.00004 in. Used to verify that a hole does not exceed its specified upper size limit in precision machining and quality control applications
Class X No-Go (Minus) pin gauge with diameter 0.2267 in, tolerance ±0.00004 in, and 2 in length. Made from uncoated steel. Used for dimensional inspection to verify that hole diameters do not exceed the specified size in manufacturing and quality control applications. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with diameter 0.2267 in, tolerance ±0.00004 in, and 2 in length. Made from uncoated steel. Used for dimensional inspection to verify that hole diameters do not exceed the specified size in manufacturing and quality control applications. Includes Certificate of Accuracy with NIST Traceability
This Class X No-Go (Minus) pin gauge has a diameter of 0.1659 in and a tolerance of 0.00004 in. It is made of uncoated steel and is 2 in long. Used as a limit inspection tool to verify that a hole does not exceed the specified diameter, ensuring tight tolerance control in quality assurance applications
VERMONT GAGE
This Class X No-Go (Minus) pin gauge has a diameter of 0.1659 in and a tolerance of 0.00004 in. It is made of uncoated steel and is 2 in long. Used as a limit inspection tool to verify that a hole does not exceed the specified diameter, ensuring tight tolerance control in quality assurance applications
Class X No-Go (Minus) pin gauge with 0.1473 in diameter, 2 in length, and 0.00004 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its maximum allowable size in machining and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.1473 in diameter, 2 in length, and 0.00004 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its maximum allowable size in machining and quality control applications
Class X No-Go (Minus) pin gauge with diameter 0.1758 in, tolerance 0.00004 in, and length 2 in. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters in machining and quality control applications. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with diameter 0.1758 in, tolerance 0.00004 in, and length 2 in. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters in machining and quality control applications. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (minus) pin gauge with 0.1627 in diameter and 0.00004 in tolerance. Used to verify that a hole does not exceed its maximum allowable size; the gauge should not enter the hole if the hole is within tolerance. Suitable for quality control in machining and manufacturing. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (minus) pin gauge with 0.1627 in diameter and 0.00004 in tolerance. Used to verify that a hole does not exceed its maximum allowable size; the gauge should not enter the hole if the hole is within tolerance. Suitable for quality control in machining and manufacturing. Includes Certificate of Accuracy with NIST Traceability