Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Describe the job or paste specifications. Press Enter or Search.
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Pin Gauge No-Go Kelas X VERMONT GAGE: Diameter 0.2135 in, Toleransi 0.00004 in, 2 in - Class X No-Go (Minus) Pin Gauges - Dia. 0.0751 in to 0.2810 in
VERMONT GAGEClass X No-Go (Minus) Pin Gauges - Dia. 0.0751 in to 0.2810 in

Pin Gauge No-Go Kelas X VERMONT GAGE: Diameter 0.2135 in, Toleransi 0.00004 in, 2 in

VERMONT GAGE menghadirkan Class X No-Go (Minus) Pin Gauge dengan diameter 0.2135 inci, dirancang untuk memeriksa batas toleransi maksimum lubang pada proses manufaktur presisi. Alat ukur ini terbuat dari baja tanpa…

SKU 3G-OTH-283849

Merek
VERMONT GAGE
Item
Pin Gauge No-Go Kelas X VERMONT GAGE: Diameter 0.2135 in, Toleransi 0.00004 in, 2 in
Part Number
141221350
Kategori
Class X No-Go (Minus) Pin Gauges - Dia. 0.0751 in to 0.2810 in
Tersedia untuk Dipesan
Also known as:141221350VERMONT GAGE
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VERMONT GAGE
Manufacturer Part Number
141221350
Type
2 in, Uncoated Steel
Tolerance
0.00004 in
Diameter (in)
0.2135

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VERMONT GAGE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

VERMONT GAGE menghadirkan Class X No-Go (Minus) Pin Gauge dengan diameter 0.2135 inci, dirancang untuk memeriksa batas toleransi maksimum lubang pada proses manufaktur presisi. Alat ukur ini terbuat dari baja tanpa lapisan (Uncoated Steel) dengan toleransi super ketat 0.00004 inci, serta dilengkapi Certificate of Accuracy dengan NIST Traceability. Cocok digunakan sebagai perlengkapan quality control di industri permesinan dan manufaktur komponen presisi di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi VERMONT GAGE Class X No-Go Pin Gauge 0.2135 in?

Pin gauge ini berfungsi sebagai alat ukur No-Go (Minus) untuk memverifikasi bahwa diameter lubang tidak melebihi batas maksimum yang diizinkan. Jika pin gauge ini masuk ke dalam lubang, maka lubang tersebut dinyatakan out-of-spec. Produk VERMONT GAGE ini memiliki diameter 0.2135 inci dengan toleransi 0.00004 inci.

Apa spesifikasi teknis VERMONT GAGE Class X No-Go Pin Gauge 141221350?

Spesifikasi teknis meliputi: diameter 0.2135 inci, tipe No-Go (Minus) Class X, material Uncoated Steel, toleransi 0.00004 inci, dan panjang 2 inci. Setiap pin gauge disertai Certificate of Accuracy dengan NIST Traceability untuk menjamin ketertelusuran kalibrasi.

Di mana beli VERMONT GAGE Class X No-Go Pin Gauge di Indonesia?

Anda dapat membeli VERMONT GAGE Class X No-Go Pin Gauge 0.2135 inci melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan sehingga produk sampai ke lokasi Anda dengan aman.

Bagaimana cara memilih pin gauge yang tepat untuk aplikasi manufaktur?

Pilih pin gauge berdasarkan diameter nominal lubang yang akan diperiksa dan kelas toleransi yang dibutuhkan. Untuk aplikasi presisi tinggi, gunakan Class X dengan toleransi 0.00004 inci seperti VERMONT GAGE ini. Pastikan Anda memiliki set Go dan No-Go untuk memeriksa batas toleransi minimum dan maksimum.

Apa itu Certificate of Accuracy dengan NIST Traceability pada pin gauge?

Certificate of Accuracy dengan NIST Traceability adalah dokumen yang menyatakan bahwa pin gauge telah dikalibrasi dan hasil pengukurannya dapat ditelusuri kembali ke standar nasional Amerika Serikat (NIST). Ini menjamin keakuratan alat ukur, sangat penting untuk quality control di industri manufaktur presisi.

Digunakan dalam

Aplikasi umum untuk VERMONT GAGE
Automotive manufacturing — VERMONT GAGE Class X pin gauges for inspecting engine cylinder bore diameters after honing.
Aerospace machining — VERMONT GAGE No-Go pin gauges for verifying hole tolerances in aircraft structural components.
Tool and die maintenance — VERMONT GAGE drill blanks used as reference pins for aligning dies and fixtures.
Quality control labs — VERMONT GAGE Class X pin gauges for calibrating bore gauges and micrometers.
General metalworking — VERMONT GAGE Go pin gauges for checking slot widths in machined parts.
Custom gage making — VERMONT GAGE high-speed steel drill blanks as raw material for fabricating custom inspection plugs.
Not sure this is the right part? Photo-identify it→

VERMONT GAGE Produk

3G Electric memasok VERMONT GAGE class x no-go (minus) pin gauges - dia. 0.0751 in to 0.2810 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Lainnya dari VERMONT GAGE

Lihat semua VERMONT GAGE suku cadang →
Class X No-Go (minus) pin gauge with 0.1477 in diameter, 2 in length, uncoated steel, and ±0.00004 in tolerance. Used to verify that a hole does not exceed its upper size limit; the gauge should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (minus) pin gauge with 0.1477 in diameter, 2 in length, uncoated steel, and ±0.00004 in tolerance. Used to verify that a hole does not exceed its upper size limit; the gauge should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability
This Class X No-Go (Minus) pin gauge has a diameter of 0.2300 in and a tolerance of 0.00004 in. Made of uncoated steel, it is 2 in long and includes a Certificate of Accuracy with NIST Traceability. Used for go/no-go dimensional verification of hole diameters to ensure parts meet specified tolerances
VERMONT GAGE
This Class X No-Go (Minus) pin gauge has a diameter of 0.2300 in and a tolerance of 0.00004 in. Made of uncoated steel, it is 2 in long and includes a Certificate of Accuracy with NIST Traceability. Used for go/no-go dimensional verification of hole diameters to ensure parts meet specified tolerances
Class X No-Go (Minus) pin gauge, 0.0916 in diameter, 2 in length, uncoated steel, tolerance 0.00004 in. Used for go/no-go inspection of hole maximum size limits in manufacturing quality control. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge, 0.0916 in diameter, 2 in length, uncoated steel, tolerance 0.00004 in. Used for go/no-go inspection of hole maximum size limits in manufacturing quality control. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge, 0.1735 in diameter, 2 in length, uncoated steel, tolerance 0.00004 in. Used to verify that a hole does not exceed its specified upper size limit in quality control and inspection applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge, 0.1735 in diameter, 2 in length, uncoated steel, tolerance 0.00004 in. Used to verify that a hole does not exceed its specified upper size limit in quality control and inspection applications
Class X No-Go (Minus) pin gauge with 0.2640 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for no-go gaging to verify hole diameters do not exceed the specified size in precision inspection applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.2640 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for no-go gaging to verify hole diameters do not exceed the specified size in precision inspection applications
Class X No-Go (Minus) pin gauge with 0.1245 in diameter, 0.00004 in tolerance, 2 in length, uncoated steel. Used for go/no-go dimensional inspection of hole diameters to ensure they do not exceed the upper tolerance limit. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.1245 in diameter, 0.00004 in tolerance, 2 in length, uncoated steel. Used for go/no-go dimensional inspection of hole diameters to ensure they do not exceed the upper tolerance limit. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (minus) pin gauge used to verify that a hole does not exceed its maximum allowable size. Diameter 0.1834 in, tolerance ±0.00004 in, length 2 in, uncoated steel. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (minus) pin gauge used to verify that a hole does not exceed its maximum allowable size. Diameter 0.1834 in, tolerance ±0.00004 in, length 2 in, uncoated steel. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge with 0.1820 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used to verify that a hole does not exceed its maximum allowable diameter in quality control and inspection applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.1820 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used to verify that a hole does not exceed its maximum allowable diameter in quality control and inspection applications

Ulasan pelanggan

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first