Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
VERMONT GAGE Kelas X Pin Gauge No-Go: 0.5296 in Dia, 0.00004 in Toleransi, 2 in - Class X No-Go (Minus) Pin Gauges - Dia. 0.5101 in to 0.6350 in
VERMONT GAGEClass X No-Go (Minus) Pin Gauges - Dia. 0.5101 in to 0.6350 in

VERMONT GAGE Kelas X Pin Gauge No-Go: 0.5296 in Dia, 0.00004 in Toleransi, 2 in

VERMONT GAGE Class X No-Go Pin Gauge berdiameter 0.5296 in adalah alat ukur presisi tinggi yang digunakan untuk memeriksa batas toleransi maksimum lubang pada komponen mesin. Dengan toleransi ketat 0.00004 in dan…

SKU 3G-OTH-289008

Merek
VERMONT GAGE
Item
Kelas X Pin Gauge No-Go: 0.5296 in Dia, 0.00004 in Toleransi, 2 in
Kategori
Class X No-Go (Minus) Pin Gauges - Dia. 0.5101 in to 0.6350 in
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VERMONT GAGE
Manufacturer Part Number
141252960
Type
2 in, Uncoated Steel
Tolerance
0.00004 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VERMONT GAGE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

VERMONT GAGE Class X No-Go Pin Gauge berdiameter 0.5296 in adalah alat ukur presisi tinggi yang digunakan untuk memeriksa batas toleransi maksimum lubang pada komponen mesin. Dengan toleransi ketat 0.00004 in dan material Uncoated Steel, pin gauge ini termasuk dalam kategori Class X No-Go (Minus) untuk diameter 0.5101 in hingga 0.6350 in. Setiap unit dilengkapi Certificate of Accuracy dengan NIST Traceability, memastikan keakuratan pengukuran di lingkungan industri. Cari pin gauge presisi untuk kebutuhan quality control Anda? Produk ini adalah pilihan tepat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi VERMONT GAGE Class X No-Go Pin Gauge 0.5296 in?

Pin gauge ini berfungsi sebagai alat ukur No-Go (Minus) untuk memverifikasi bahwa diameter lubang tidak melebihi batas maksimum 0.5296 in. Jika pin gauge masuk, maka lubang dianggap out-of-spec. Toleransinya 0.00004 in dengan material Uncoated Steel, cocok untuk inspeksi presisi di industri manufaktur.

Apa spesifikasi teknis VERMONT GAGE pin gauge 141252960?

Spesifikasi: diameter 0.5296 in, tipe Class X No-Go (Minus), toleransi 0.00004 in, material Uncoated Steel, panjang 2 in. Produk ini termasuk dalam rentang diameter 0.5101 in hingga 0.6350 in dan dilengkapi Certificate of Accuracy dengan NIST Traceability dari VERMONT GAGE.

Di mana beli VERMONT GAGE pin gauge 0.5296 in di Indonesia?

Anda dapat membeli VERMONT GAGE Class X No-Go Pin Gauge 0.5296 in melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda dengan aman.

Bagaimana cara memilih pin gauge No-Go yang tepat?

Pilih pin gauge No-Go berdasarkan diameter lubang yang akan diperiksa. Untuk aplikasi presisi, gunakan Class X dengan toleransi 0.00004 in seperti VERMONT GAGE ini. Pastikan diameter pin gauge (0.5296 in) sesuai dengan batas toleransi maksimum komponen Anda. Sertifikat NIST Traceability menjamin keakuratan alat.

Apa itu Class X No-Go Pin Gauge dan mengapa penting?

Class X No-Go Pin Gauge adalah alat ukur dengan toleransi sangat ketat (0.00004 in) yang digunakan untuk memeriksa batas atas diameter lubang. Jika pin gauge masuk, komponen ditolak. Produk VERMONT GAGE ini penting untuk quality control di industri otomotif, dirgantara, dan manufaktur presisi lainnya.

Digunakan dalam

Aplikasi umum untuk VERMONT GAGE
Automotive manufacturing — VERMONT GAGE Class X pin gauges for inspecting engine cylinder bore diameters after honing.
Aerospace machining — VERMONT GAGE No-Go pin gauges for verifying hole tolerances in aircraft structural components.
Tool and die maintenance — VERMONT GAGE drill blanks used as reference pins for aligning dies and fixtures.
Quality control labs — VERMONT GAGE Class X pin gauges for calibrating bore gauges and micrometers.
General metalworking — VERMONT GAGE Go pin gauges for checking slot widths in machined parts.
Custom gage making — VERMONT GAGE high-speed steel drill blanks as raw material for fabricating custom inspection plugs.

VERMONT GAGE Produk

3G Electric memasok VERMONT GAGE class x no-go (minus) pin gauges - dia. 0.5101 in to 0.6350 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This Class X No-Go (Minus) pin gauge has a diameter of 0.5297 inches and a tolerance of 0.00004 inches. It is 2 inches long and made of uncoated steel. Used for go/no-go dimensional inspection of holes and bores in manufacturing and quality control
VERMONT GAGE
This Class X No-Go (Minus) pin gauge has a diameter of 0.5297 inches and a tolerance of 0.00004 inches. It is 2 inches long and made of uncoated steel. Used for go/no-go dimensional inspection of holes and bores in manufacturing and quality control
Class X No-Go pin gauge with 0.5299 in diameter, 0.00004 in tolerance, 2 in length, uncoated steel. Used to verify that a hole does not exceed its maximum specified size; the gauge should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go pin gauge with 0.5299 in diameter, 0.00004 in tolerance, 2 in length, uncoated steel. Used to verify that a hole does not exceed its maximum specified size; the gauge should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge with 0.5295 in diameter, 2 in length, uncoated steel, and ±0.00004 in tolerance. Used for dimensional inspection to verify that a hole or bore does not exceed its maximum allowable diameter; the No-Go side should not enter the hole, confirming the part is within tolerance. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.5295 in diameter, 2 in length, uncoated steel, and ±0.00004 in tolerance. Used for dimensional inspection to verify that a hole or bore does not exceed its maximum allowable diameter; the No-Go side should not enter the hole, confirming the part is within tolerance. Includes Certificate of Accuracy with NIST Traceability
This Class X No-Go (Minus) pin gauge has a diameter of 0.5293 in and a tolerance of 0.00004 in. It is made of uncoated steel with a 2 in length. Used for go/no-go dimensional verification of hole diameters in machining and quality control applications
VERMONT GAGE
This Class X No-Go (Minus) pin gauge has a diameter of 0.5293 in and a tolerance of 0.00004 in. It is made of uncoated steel with a 2 in length. Used for go/no-go dimensional verification of hole diameters in machining and quality control applications
Class X No-Go (Minus) pin gauge with 0.5276 in diameter, 2 in length, uncoated steel. Tolerance: 0.00004 in. Used to verify that a hole does not exceed its specified upper size limit; the gauge should not enter the hole. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.5276 in diameter, 2 in length, uncoated steel. Tolerance: 0.00004 in. Used to verify that a hole does not exceed its specified upper size limit; the gauge should not enter the hole. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge with 0.5294 in diameter, 2 in length, and ±0.00004 in tolerance. Made from uncoated steel. Used for go/no-go dimensional verification of hole maximum size in manufacturing and quality control. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.5294 in diameter, 2 in length, and ±0.00004 in tolerance. Made from uncoated steel. Used for go/no-go dimensional verification of hole maximum size in manufacturing and quality control. Includes Certificate of Accuracy with NIST Traceability

Lainnya dari VERMONT GAGE

Lihat semua VERMONT GAGE suku cadang →
Class X No-Go (Minus) pin gauge, 0.5150 in diameter, 2 in length, uncoated steel. Tolerance of 0.00004 in. Used to verify that a hole diameter does not exceed the specified limit in precision inspection and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge, 0.5150 in diameter, 2 in length, uncoated steel. Tolerance of 0.00004 in. Used to verify that a hole diameter does not exceed the specified limit in precision inspection and quality control applications
Class X No-Go pin gauge with 0.5701 in diameter, 2 in length, and ±0.00004 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its specified upper diameter limit; the gauge should not enter the hole if within tolerance
VERMONT GAGE
Class X No-Go pin gauge with 0.5701 in diameter, 2 in length, and ±0.00004 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its specified upper diameter limit; the gauge should not enter the hole if within tolerance
Class X No-Go (Minus) pin gauge with diameter 0.6224 in, tolerance ±0.00004 in, length 2 in, made of uncoated steel. Used to verify that a hole does not exceed its maximum allowable size in quality control and inspection applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with diameter 0.6224 in, tolerance ±0.00004 in, length 2 in, made of uncoated steel. Used to verify that a hole does not exceed its maximum allowable size in quality control and inspection applications
Class X No-Go pin gauge with 0.5378 in diameter, used to verify that a hole does not exceed its specified upper size limit. Made of uncoated steel with a tolerance of 0.00004 in. Includes Certificate of Accuracy with NIST Traceability. Suitable for precision inspection in quality control applications
VERMONT GAGE
Class X No-Go pin gauge with 0.5378 in diameter, used to verify that a hole does not exceed its specified upper size limit. Made of uncoated steel with a tolerance of 0.00004 in. Includes Certificate of Accuracy with NIST Traceability. Suitable for precision inspection in quality control applications
Class X No-Go (Minus) pin gauge with diameter 0.5519 in, tolerance ±0.00004 in, 2 in length, uncoated steel. Used for go/no-go inspection of hole diameters within 0.5101 in to 0.6350 in range, verifying that holes do not exceed maximum allowable size
VERMONT GAGE
Class X No-Go (Minus) pin gauge with diameter 0.5519 in, tolerance ±0.00004 in, 2 in length, uncoated steel. Used for go/no-go inspection of hole diameters within 0.5101 in to 0.6350 in range, verifying that holes do not exceed maximum allowable size
Class X No-Go (Minus) pin gauge with a diameter of 0.5422 inches, made of uncoated steel. Tolerance of 0.00004 inches. Used to verify that a hole diameter does not exceed the specified size in quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.5422 inches, made of uncoated steel. Tolerance of 0.00004 inches. Used to verify that a hole diameter does not exceed the specified size in quality control applications
Class X No-Go (Minus) pin gauge, 0.5170 in diameter, 2 in length, uncoated steel, tolerance ±0.00004 in. Used to verify that a hole does not exceed its specified upper size limit in precision inspection and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge, 0.5170 in diameter, 2 in length, uncoated steel, tolerance ±0.00004 in. Used to verify that a hole does not exceed its specified upper size limit in precision inspection and quality control applications
Class X No-Go (Minus) pin gauge for dimensional inspection of holes and bores. Diameter 0.6038 in, length 2 in, tolerance 0.00004 in. Uncoated steel construction. Used in manufacturing quality control to verify that hole diameters do not exceed the specified size
VERMONT GAGE
Class X No-Go (Minus) pin gauge for dimensional inspection of holes and bores. Diameter 0.6038 in, length 2 in, tolerance 0.00004 in. Uncoated steel construction. Used in manufacturing quality control to verify that hole diameters do not exceed the specified size