Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
VERMONT GAGE Class X No-Go (Minus) Pin Gauge: 0.8886 in Dia - Class X No-Go (Minus) Pin Gauges - Dia. 0.7601 in to 1.0000 in
VERMONT GAGEClass X No-Go (Minus) Pin Gauges - Dia. 0.7601 in to 1.0000 in

VERMONT GAGE Class X No-Go (Minus) Pin Gauge: 0.8886 in Dia

VERMONT GAGE Class X No-Go Pin Gauge dengan diameter 0.8886 in adalah alat ukur presisi tinggi yang dirancang untuk memeriksa batas toleransi lubang secara akurat. Pin gauge ini memiliki toleransi ketat 0.00006 in…

SKU 3G-OTH-266408

Merek
VERMONT GAGE
Item
Class X No-Go
Kategori
Class X No-Go (Minus) Pin Gauges - Dia. 0.7601 in to 1.0000 in
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VERMONT GAGE
Manufacturer Part Number
141288860
Type
2 in, Uncoated Steel
Tolerance
0.00006 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VERMONT GAGE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

VERMONT GAGE Class X No-Go Pin Gauge dengan diameter 0.8886 in adalah alat ukur presisi tinggi yang dirancang untuk memeriksa batas toleransi lubang secara akurat. Pin gauge ini memiliki toleransi ketat 0.00006 in dan terbuat dari baja tanpa lapisan (Uncoated Steel) untuk ketahanan aus yang optimal. Setiap produk dilengkapi dengan Certificate of Accuracy dengan NIST Traceability, menjadikannya pilihan andal untuk aplikasi kalibrasi dan inspeksi di industri manufaktur dan permesinan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi VERMONT GAGE Class X No-Go Pin Gauge 0.8886 in?

VERMONT GAGE Class X No-Go Pin Gauge ini memiliki diameter 0.8886 in dengan toleransi 0.00006 in. Terbuat dari Uncoated Steel dan termasuk dalam tipe 2 in. Dilengkapi Certificate of Accuracy dengan NIST Traceability untuk menjamin ketertelusuran pengukuran.

Untuk apa VERMONT GAGE Class X No-Go Pin Gauge digunakan?

Pin gauge ini digunakan sebagai alat ukur go/no-go untuk memeriksa batas maksimum diameter lubang. Dengan toleransi 0.00006 in, alat ini memastikan komponen yang diinspeksi memenuhi spesifikasi desain yang ketat, terutama dalam proses quality control di industri manufaktur.

Bagaimana cara memilih pin gauge yang tepat?

Pilih pin gauge berdasarkan diameter lubang yang akan diukur dan toleransi yang dibutuhkan. VERMONT GAGE Class X No-Go Pin Gauge dengan diameter 0.8886 in dan toleransi 0.00006 in cocok untuk aplikasi presisi tinggi. Pastikan Anda memilih tipe No-Go (Minus) untuk memeriksa batas maksimum lubang.

Di mana beli VERMONT GAGE Class X No-Go Pin Gauge di Indonesia?

Anda dapat membeli VERMONT GAGE Class X No-Go Pin Gauge diameter 0.8886 in melalui 3G Electric, distributor resmi yang melayani pengiriman ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan aman dan tepat waktu.

Digunakan dalam

Aplikasi umum untuk VERMONT GAGE
Automotive manufacturing — VERMONT GAGE Class X pin gauges for inspecting engine cylinder bore diameters after honing.
Aerospace machining — VERMONT GAGE No-Go pin gauges for verifying hole tolerances in aircraft structural components.
Tool and die maintenance — VERMONT GAGE drill blanks used as reference pins for aligning dies and fixtures.
Quality control labs — VERMONT GAGE Class X pin gauges for calibrating bore gauges and micrometers.
General metalworking — VERMONT GAGE Go pin gauges for checking slot widths in machined parts.
Custom gage making — VERMONT GAGE high-speed steel drill blanks as raw material for fabricating custom inspection plugs.

VERMONT GAGE Produk

3G Electric memasok VERMONT GAGE class x no-go (minus) pin gauges - dia. 0.7601 in to 1.0000 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This Class X No-Go (Minus) pin gauge has a diameter of 0.8887 in and a tolerance of 0.00006 in. It is made of uncoated steel with a length of 2 in. Used to verify that a hole does not exceed the specified upper size limit. Includes a Certificate of Accuracy with NIST Traceability
VERMONT GAGE
This Class X No-Go (Minus) pin gauge has a diameter of 0.8887 in and a tolerance of 0.00006 in. It is made of uncoated steel with a length of 2 in. Used to verify that a hole does not exceed the specified upper size limit. Includes a Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge with a diameter of 0.8884 in, tolerance of 0.00006 in, and length of 2 in. Constructed from uncoated steel. Used for go/no-go dimensional inspection of holes and bores in manufacturing and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.8884 in, tolerance of 0.00006 in, and length of 2 in. Constructed from uncoated steel. Used for go/no-go dimensional inspection of holes and bores in manufacturing and quality control applications
Class X No-Go (Minus) pin gauge with a diameter of 0.8888 inches, 2 inches long, made from uncoated steel. Tolerance is 0.00006 inches. Used for go/no-go dimensional verification of holes or bores in quality control and inspection processes
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.8888 inches, 2 inches long, made from uncoated steel. Tolerance is 0.00006 inches. Used for go/no-go dimensional verification of holes or bores in quality control and inspection processes
Class X No-Go (Minus) pin gauge with a diameter of 0.8882 in and tolerance of 0.00006 in. Made of uncoated steel, 2 in length. Used for go/no-go dimensional inspection of holes and bores to verify that diameters do not exceed the upper tolerance limit. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.8882 in and tolerance of 0.00006 in. Made of uncoated steel, 2 in length. Used for go/no-go dimensional inspection of holes and bores to verify that diameters do not exceed the upper tolerance limit. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (minus) pin gauge with 0.8881 in diameter and 0.00006 in tolerance. Made from uncoated steel, 2 in length. Used to verify that a hole does not exceed the specified dimension; the gauge should not enter a hole within tolerance. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (minus) pin gauge with 0.8881 in diameter and 0.00006 in tolerance. Made from uncoated steel, 2 in length. Used to verify that a hole does not exceed the specified dimension; the gauge should not enter a hole within tolerance. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge with 0.8883 in diameter, 0.00006 in tolerance, and 2 in length. Made of uncoated steel. Used to verify that a hole diameter does not exceed the upper tolerance limit; the gauge should not enter the hole if within specification
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.8883 in diameter, 0.00006 in tolerance, and 2 in length. Made of uncoated steel. Used to verify that a hole diameter does not exceed the upper tolerance limit; the gauge should not enter the hole if within specification

Lainnya dari VERMONT GAGE

Lihat semua VERMONT GAGE suku cadang →
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. With a diameter of 0.9435 in and a tolerance of 0.00006 in, it is made from uncoated steel and measures 2 in in length. The gauge is intended for precision inspection in machining and quality control applications
VERMONT GAGE
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. With a diameter of 0.9435 in and a tolerance of 0.00006 in, it is made from uncoated steel and measures 2 in in length. The gauge is intended for precision inspection in machining and quality control applications
Class X No-Go (Minus) pin gauge with 0.9385 in diameter, 2 in length, and ±0.00006 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its maximum allowable diameter in quality control applications. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.9385 in diameter, 2 in length, and ±0.00006 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its maximum allowable diameter in quality control applications. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge with a diameter of 0.9857 inches and a tolerance of ±0.00006 inches. Made from uncoated steel, this 2-inch long gauge is used to verify that a hole does not exceed its maximum allowable size; if the gauge enters the hole, the hole is oversized. Includes a Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.9857 inches and a tolerance of ±0.00006 inches. Made from uncoated steel, this 2-inch long gauge is used to verify that a hole does not exceed its maximum allowable size; if the gauge enters the hole, the hole is oversized. Includes a Certificate of Accuracy with NIST Traceability
Class X No-Go (minus) pin gauge with a diameter of 0.9239 inches, 2-inch length, and tolerance of 0.00006 inches. Made of uncoated steel. Used to verify that a hole's diameter does not exceed the upper tolerance limit; if the gauge fits, the hole is oversize and out of specification. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (minus) pin gauge with a diameter of 0.9239 inches, 2-inch length, and tolerance of 0.00006 inches. Made of uncoated steel. Used to verify that a hole's diameter does not exceed the upper tolerance limit; if the gauge fits, the hole is oversize and out of specification. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge, diameter 0.7857 in, tolerance ±0.00004 in. Uncoated steel, 2 in length. Used to verify that a hole does not exceed its maximum allowable diameter; the gauge should not enter the hole if within tolerance
VERMONT GAGE
Class X No-Go (Minus) pin gauge, diameter 0.7857 in, tolerance ±0.00004 in. Uncoated steel, 2 in length. Used to verify that a hole does not exceed its maximum allowable diameter; the gauge should not enter the hole if within tolerance
Class X No-Go (Minus) pin gauge with 0.9752 in diameter, 2 in length, uncoated steel, and ±0.00006 in tolerance. Used to verify that a hole does not exceed the specified upper dimension limit in machining and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.9752 in diameter, 2 in length, uncoated steel, and ±0.00006 in tolerance. Used to verify that a hole does not exceed the specified upper dimension limit in machining and quality control applications
Class X No-Go (Minus) pin gauge with 0.9599 in diameter, 2 in length, and ±0.00006 in tolerance. Uncoated steel construction. Used for verifying that hole diameters do not exceed the upper tolerance limit in precision manufacturing and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.9599 in diameter, 2 in length, and ±0.00006 in tolerance. Uncoated steel construction. Used for verifying that hole diameters do not exceed the upper tolerance limit in precision manufacturing and quality control applications
Class X No-Go (minus) pin gauge with 0.8021 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for go/no-go inspection of hole diameters to verify that holes do not exceed the upper limit in machining and quality control applications
VERMONT GAGE
Class X No-Go (minus) pin gauge with 0.8021 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for go/no-go inspection of hole diameters to verify that holes do not exceed the upper limit in machining and quality control applications