Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
VERMONT GAGE Class X No-Go (Minus) Pin Gauge - Dia. 0.9193 in - Class X No-Go (Minus) Pin Gauges - Dia. 0.7601 in to 1.0000 in
VERMONT GAGEClass X No-Go (Minus) Pin Gauges - Dia. 0.7601 in to 1.0000 in

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - Dia. 0.9193 in

VERMONT GAGE menghadirkan Class X No-Go Pin Gauge dengan diameter 0.9193 inci, dirancang untuk pemeriksaan toleransi presisi tinggi pada komponen industri. Alat ukur ini memiliki toleransi super ketat sebesar 0.00006…

SKU 3G-OTH-266414

Merek
VERMONT GAGE
Item
Class X No-Go
Kategori
Class X No-Go (Minus) Pin Gauges - Dia. 0.7601 in to 1.0000 in
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

VERMONT GAGE
Manufacturer Part Number
141291930
Type
2 in, Uncoated Steel
Tolerance
0.00006 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

VERMONT GAGE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

VERMONT GAGE menghadirkan Class X No-Go Pin Gauge dengan diameter 0.9193 inci, dirancang untuk pemeriksaan toleransi presisi tinggi pada komponen industri. Alat ukur ini memiliki toleransi super ketat sebesar 0.00006 inci, terbuat dari baja tanpa lapisan (uncoated steel), dan dilengkapi Certificate of Accuracy dengan NIST Traceability. Cocok untuk aplikasi quality control di bengkel mesin dan lini produksi yang memerlukan akurasi maksimal.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi dari VERMONT GAGE Class X No-Go Pin Gauge 0.9193 in?

Pin gauge ini berfungsi sebagai alat ukur 'No-Go' (minus) untuk memverifikasi bahwa diameter lubang tidak melebihi batas maksimum 0.9193 inci. Jika pin masuk, maka lubang dianggap out-of-spec. Toleransinya 0.00006 inci dengan sertifikat akurasi tertelusur NIST.

Apa spesifikasi teknis VERMONT GAGE pin gauge 141291930?

Spesifikasi: diameter 0.9193 inci, tipe No-Go (minus), toleransi 0.00006 inci, material baja tanpa lapisan (uncoated steel), panjang 2 inci. Dilengkapi Certificate of Accuracy dengan NIST Traceability. Nomor part pabrikan: 141291930.

Di mana beli VERMONT GAGE pin gauge di Indonesia?

Anda dapat membeli VERMONT GAGE Class X No-Go Pin Gauge 0.9193 in melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan kepabeanan untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih pin gauge yang tepat untuk aplikasi industri?

Pilih pin gauge berdasarkan diameter nominal yang diukur (misal 0.9193 in), kelas toleransi (Class X = 0.00006 in), dan tipe Go/No-Go. Pastikan material sesuai dengan lingkungan kerja; VERMONT GAGE ini menggunakan uncoated steel. Sertifikat NIST menjamin ketertelusuran kalibrasi.

Digunakan dalam

Aplikasi umum untuk VERMONT GAGE
Automotive manufacturing — VERMONT GAGE Class X pin gauges for inspecting engine cylinder bore diameters after honing.
Aerospace machining — VERMONT GAGE No-Go pin gauges for verifying hole tolerances in aircraft structural components.
Tool and die maintenance — VERMONT GAGE drill blanks used as reference pins for aligning dies and fixtures.
Quality control labs — VERMONT GAGE Class X pin gauges for calibrating bore gauges and micrometers.
General metalworking — VERMONT GAGE Go pin gauges for checking slot widths in machined parts.
Custom gage making — VERMONT GAGE high-speed steel drill blanks as raw material for fabricating custom inspection plugs.

VERMONT GAGE Produk

3G Electric memasok VERMONT GAGE class x no-go (minus) pin gauges - dia. 0.7601 in to 1.0000 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. It has a diameter of 0.9194 inches, a tolerance of 0.00006 inches, and a length of 2 inches. Made from uncoated steel, it is suitable for precision inspection in quality control applications. Includes a Certificate of Accuracy with NIST Traceability
VERMONT GAGE
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. It has a diameter of 0.9194 inches, a tolerance of 0.00006 inches, and a length of 2 inches. Made from uncoated steel, it is suitable for precision inspection in quality control applications. Includes a Certificate of Accuracy with NIST Traceability
This Class X No-Go (minus) pin gauge has a diameter of 0.9191 inches and a length of 2 inches, made from uncoated steel. With a tolerance of 0.00006 inches, it is used for go/no-go dimensional verification of holes and bores in manufacturing and quality control applications
VERMONT GAGE
This Class X No-Go (minus) pin gauge has a diameter of 0.9191 inches and a length of 2 inches, made from uncoated steel. With a tolerance of 0.00006 inches, it is used for go/no-go dimensional verification of holes and bores in manufacturing and quality control applications
Class X No-Go (Minus) pin gauge with a diameter of 0.9190 inches and a tolerance of 0.00006 inches. Made from uncoated steel, this gauge is used for go/no-go dimensional verification of hole diameters within the 0.7601 to 1.0000 inch range. Includes a Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.9190 inches and a tolerance of 0.00006 inches. Made from uncoated steel, this gauge is used for go/no-go dimensional verification of hole diameters within the 0.7601 to 1.0000 inch range. Includes a Certificate of Accuracy with NIST Traceability
This Class X No-Go (minus) pin gauge is used to verify that a hole does not exceed its specified upper size limit. It is made of uncoated steel with a tolerance of 0.00006 in. The gauge is 2 in long and includes a Certificate of Accuracy with NIST Traceability. Typical applications include quality control and inspection in manufacturing settings
VERMONT GAGE
This Class X No-Go (minus) pin gauge is used to verify that a hole does not exceed its specified upper size limit. It is made of uncoated steel with a tolerance of 0.00006 in. The gauge is 2 in long and includes a Certificate of Accuracy with NIST Traceability. Typical applications include quality control and inspection in manufacturing settings
Class X No-Go (Minus) pin gauge with a diameter of 0.9195 inches, tolerance of ±0.00006 inches, and length of 2 inches. Made from uncoated steel. Used to verify maximum material limits of machined holes or features; as a No-Go gauge, it should not enter the part if within tolerance. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.9195 inches, tolerance of ±0.00006 inches, and length of 2 inches. Made from uncoated steel. Used to verify maximum material limits of machined holes or features; as a No-Go gauge, it should not enter the part if within tolerance. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (minus) pin gauge with diameter 0.9199 inches, tolerance 0.00006 inches, length 2 inches, uncoated steel. Used to verify that a machined hole does not exceed its maximum allowable diameter. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (minus) pin gauge with diameter 0.9199 inches, tolerance 0.00006 inches, length 2 inches, uncoated steel. Used to verify that a machined hole does not exceed its maximum allowable diameter. Includes Certificate of Accuracy with NIST Traceability

Lainnya dari VERMONT GAGE

Lihat semua VERMONT GAGE suku cadang →
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. With a diameter of 0.9435 in and a tolerance of 0.00006 in, it is made from uncoated steel and measures 2 in in length. The gauge is intended for precision inspection in machining and quality control applications
VERMONT GAGE
This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. With a diameter of 0.9435 in and a tolerance of 0.00006 in, it is made from uncoated steel and measures 2 in in length. The gauge is intended for precision inspection in machining and quality control applications
Class X No-Go (Minus) pin gauge with 0.9385 in diameter, 2 in length, and ±0.00006 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its maximum allowable diameter in quality control applications. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.9385 in diameter, 2 in length, and ±0.00006 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its maximum allowable diameter in quality control applications. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge with a diameter of 0.9857 inches and a tolerance of ±0.00006 inches. Made from uncoated steel, this 2-inch long gauge is used to verify that a hole does not exceed its maximum allowable size; if the gauge enters the hole, the hole is oversized. Includes a Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (Minus) pin gauge with a diameter of 0.9857 inches and a tolerance of ±0.00006 inches. Made from uncoated steel, this 2-inch long gauge is used to verify that a hole does not exceed its maximum allowable size; if the gauge enters the hole, the hole is oversized. Includes a Certificate of Accuracy with NIST Traceability
Class X No-Go (minus) pin gauge with a diameter of 0.9239 inches, 2-inch length, and tolerance of 0.00006 inches. Made of uncoated steel. Used to verify that a hole's diameter does not exceed the upper tolerance limit; if the gauge fits, the hole is oversize and out of specification. Includes Certificate of Accuracy with NIST Traceability
VERMONT GAGE
Class X No-Go (minus) pin gauge with a diameter of 0.9239 inches, 2-inch length, and tolerance of 0.00006 inches. Made of uncoated steel. Used to verify that a hole's diameter does not exceed the upper tolerance limit; if the gauge fits, the hole is oversize and out of specification. Includes Certificate of Accuracy with NIST Traceability
Class X No-Go (Minus) pin gauge, diameter 0.7857 in, tolerance ±0.00004 in. Uncoated steel, 2 in length. Used to verify that a hole does not exceed its maximum allowable diameter; the gauge should not enter the hole if within tolerance
VERMONT GAGE
Class X No-Go (Minus) pin gauge, diameter 0.7857 in, tolerance ±0.00004 in. Uncoated steel, 2 in length. Used to verify that a hole does not exceed its maximum allowable diameter; the gauge should not enter the hole if within tolerance
Class X No-Go (Minus) pin gauge with 0.9752 in diameter, 2 in length, uncoated steel, and ±0.00006 in tolerance. Used to verify that a hole does not exceed the specified upper dimension limit in machining and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.9752 in diameter, 2 in length, uncoated steel, and ±0.00006 in tolerance. Used to verify that a hole does not exceed the specified upper dimension limit in machining and quality control applications
Class X No-Go (Minus) pin gauge with 0.9599 in diameter, 2 in length, and ±0.00006 in tolerance. Uncoated steel construction. Used for verifying that hole diameters do not exceed the upper tolerance limit in precision manufacturing and quality control applications
VERMONT GAGE
Class X No-Go (Minus) pin gauge with 0.9599 in diameter, 2 in length, and ±0.00006 in tolerance. Uncoated steel construction. Used for verifying that hole diameters do not exceed the upper tolerance limit in precision manufacturing and quality control applications
Class X No-Go (minus) pin gauge with 0.8021 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for go/no-go inspection of hole diameters to verify that holes do not exceed the upper limit in machining and quality control applications
VERMONT GAGE
Class X No-Go (minus) pin gauge with 0.8021 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for go/no-go inspection of hole diameters to verify that holes do not exceed the upper limit in machining and quality control applications