VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.0883 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a precision inspection tool with a 0.0883 in diameter and a tolerance of 0.00004 in. Made from uncoated steel, this Go (Plus) gauge is used for verifying the minimum…
SKU 3G-OTH-226275
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a precision inspection tool with a 0.0883 in diameter and a tolerance of 0.00004 in. Made from uncoated steel, this Go (Plus) gauge is used for verifying the minimum acceptable hole size. It includes a Certificate of Accuracy with NIST Traceability for dimensional verification.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used to verify the minimum acceptable hole size in precision machining and quality control. It is a Go (Plus) gauge that checks that a hole is not undersized, ensuring parts meet tight tolerances in industries like aerospace and automotive.
What are the specifications of the VERMONT GAGE Class X Go Pin Gauge 141108830?
The VERMONT GAGE Class X Go Pin Gauge (MPN 141108830) has a diameter of 0.0883 in, a tolerance of 0.00004 in, and is made from uncoated steel. It includes a Certificate of Accuracy with NIST Traceability and is an inch-type gauge from VERMONT GAGE.
Where to buy VERMONT GAGE Class X Go Pin Gauges worldwide?
You can source VERMONT GAGE Class X Go Pin Gauges worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location, ensuring you receive precision gauges like the 141108830 with NIST-traceable certification.
How to select the correct VERMONT GAGE Class X Go Pin Gauge?
To select the correct VERMONT GAGE Class X Go Pin Gauge, match the gauge diameter to the minimum hole size you need to inspect. For example, the 0.0883 in Go (Plus) gauge checks that holes are not smaller than that dimension. Always verify tolerance (0.00004 in) and material (uncoated steel) for your application.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.0751 in to 0.2810 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
