VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.6724 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141167240) is a 0.6724-inch diameter, uncoated steel go pin gauge with a tolerance of 0.00004 inches. It is a Class X Go (Plus) gauge, supplied with a Certificate of…
SKU 3G-OTH-263999
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141167240) is a 0.6724-inch diameter, uncoated steel go pin gauge with a tolerance of 0.00004 inches. It is a Class X Go (Plus) gauge, supplied with a Certificate of Accuracy with NIST Traceability.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used to check the minimum acceptable diameter of a hole in precision machining and quality control. The 'Go' end must pass into the hole; if it does not, the hole is undersized. This 0.6724-inch gauge ensures parts meet tight tolerances.
What are the specifications of the VERMONT GAGE 141167240 pin gauge?
The VERMONT GAGE 141167240 is a Class X Go (Plus) pin gauge with a diameter of 0.6724 inches, a tolerance of 0.00004 inches, and is made of uncoated steel. It includes a Certificate of Accuracy with NIST Traceability, ensuring measurement reliability for inch-based inspection.
Where to buy VERMONT GAGE pin gauges worldwide?
3G Electric supplies VERMONT GAGE pin gauges worldwide, handling full logistics and customs clearance for global delivery. As a sourcing partner, we provide this Class X Go gauge (MPN 141167240) with NIST-traceable certification. Contact us for availability and lead time to your location.
How to select the correct VERMONT GAGE Class X pin gauge?
To select the correct VERMONT GAGE Class X pin gauge, match the nominal diameter (e.g., 0.6724 inches) to the hole's minimum tolerance. Use a Go gauge to verify the lower limit; the gauge must enter freely. Always verify the tolerance class (0.00004 inches) and ensure NIST-traceable certification for quality assurance.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.6351 in to 0.7600 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
