VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.7206 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a precision inspection tool with a 0.7206 in diameter and a tolerance of 0.00004 in. Made of uncoated steel, this Go (Plus) gauge is used for verifying the minimum…
SKU 3G-OTH-263104
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a precision inspection tool with a 0.7206 in diameter and a tolerance of 0.00004 in. Made of uncoated steel, this Go (Plus) gauge is used for verifying the minimum acceptable hole size. It includes a Certificate of Accuracy with NIST Traceability (MPN 141172060).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used to verify the minimum acceptable hole size in precision manufacturing. The Go (Plus) end checks that a hole is not undersized. It is essential for quality control in aerospace, automotive, and medical device industries where tight tolerances are critical.
What are the specifications of the VERMONT GAGE Class X Go Pin Gauge 0.7206 in?
The VERMONT GAGE Class X Go Pin Gauge has a diameter of 0.7206 in, a tolerance of 0.00004 in, and is made of uncoated steel. It is an inch-type gauge and includes a Certificate of Accuracy with NIST Traceability. The manufacturer part number is 141172060.
Where to buy VERMONT GAGE Class X Go Pin Gauges worldwide?
You can source VERMONT GAGE Class X Go Pin Gauges worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your facility. Contact us for availability and lead time on the 0.7206 in model (MPN 141172060).
How to select the correct VERMONT GAGE Class X Go Pin Gauge?
Select a VERMONT GAGE Class X Go Pin Gauge by matching the nominal diameter to the minimum hole size you need to inspect. The Go (Plus) gauge ensures the hole is not smaller than the specified dimension. Always verify the tolerance (0.00004 in for Class X) and confirm NIST-traceable certification is included.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.6351 in to 0.7600 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
