VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.7427 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a precision inspection tool with a 0.7427 in diameter and a tolerance of 0.00004 in. Made from uncoated steel, this Go (Plus) gauge is used for verifying the minimum…
SKU 3G-OTH-262821
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a precision inspection tool with a 0.7427 in diameter and a tolerance of 0.00004 in. Made from uncoated steel, this Go (Plus) gauge is used for verifying the minimum acceptable hole size. It includes a Certificate of Accuracy with NIST Traceability (MPN 141174270).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used to verify the minimum acceptable hole size in precision manufacturing. The Go (Plus) end checks that a hole is not undersized. It is essential for quality control in aerospace, automotive, and medical device industries where tight tolerances are critical.
What are the specifications of the VERMONT GAGE Class X Go Pin Gauge 0.7427 in?
This VERMONT GAGE Class X Go (Plus) Pin Gauge has a diameter of 0.7427 inches, a tolerance of 0.00004 inches, and is made from uncoated steel. It includes a Certificate of Accuracy with NIST Traceability. The manufacturer part number is 141174270.
Where to buy VERMONT GAGE Class X Go Pin Gauges worldwide?
You can source VERMONT GAGE Class X Go Pin Gauges through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this precision inspection tool.
How to select the correct VERMONT GAGE Class X Go Pin Gauge?
Select a VERMONT GAGE Class X Go Pin Gauge by matching the nominal diameter to the minimum hole size you need to verify. The Go (Plus) gauge should pass freely into the hole. Ensure the tolerance class (Class X, 0.00004 in) meets your application requirements. Always use a gauge with NIST-traceable certification.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.6351 in to 0.7600 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
