VERMONT GAGE Class X No-Go Pin Gauge: 0.9008 in Dia, 0.00006 in Tolerance, 2 in
The VERMONT GAGE Class X No-Go (Minus) Pin Gauge, model 141290080, is a precision inspection tool with a diameter of 0.9008 in and a tolerance of 0.00006 in. Made from uncoated steel, this No-Go pin gauge is designed…
SKU 3G-OTH-267789
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X No-Go (Minus) Pin Gauge, model 141290080, is a precision inspection tool with a diameter of 0.9008 in and a tolerance of 0.00006 in. Made from uncoated steel, this No-Go pin gauge is designed for verifying that a hole does not exceed the specified upper size limit. It includes a Certificate of Accuracy with NIST Traceability for dimensional verification.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the VERMONT GAGE Class X No-Go Pin Gauge used for?
This precision pin gauge is used to verify that a hole does not exceed its specified upper size limit. In quality control and machining, the No-Go member must not enter the hole; if it does, the hole is oversized and out of tolerance.
What are the specifications of the VERMONT GAGE 141290080 pin gauge?
The VERMONT GAGE Class X No-Go pin gauge has a diameter of 0.9008 in, a tolerance of 0.00006 in, and a length of 2 in. It is made from uncoated steel and includes a Certificate of Accuracy with NIST Traceability.
Where to buy VERMONT GAGE pin gauges worldwide?
3G Electric supplies VERMONT GAGE pin gauges worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this Class X No-Go gauge.
How to use a No-Go pin gauge correctly?
Insert the No-Go gauge into the hole being inspected. It should NOT pass through. If it enters freely, the hole exceeds the upper size limit and is out of tolerance. Always handle gauges by the insulated handle to avoid thermal expansion affecting readings.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x no-go (minus) pin gauges - dia. 0.7601 in to 1.0000 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
