VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.4289 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141142890) is a 0.4289-inch diameter, uncoated steel pin gauge with a tolerance of 0.00004 inches. It is a Go (Plus) gauge, designed for verifying the minimum…
SKU 3G-OTH-216557
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141142890) is a 0.4289-inch diameter, uncoated steel pin gauge with a tolerance of 0.00004 inches. It is a Go (Plus) gauge, designed for verifying the minimum acceptable hole size within its specified diameter range. This Class X gauge includes a Certificate of Accuracy with NIST Traceability.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
This VERMONT GAGE Class X Go (Plus) pin gauge is used to verify the minimum acceptable hole size in precision machining and quality inspection. It checks that a hole is not smaller than 0.4289 inches, ensuring parts meet tight tolerances for assembly and function.
What are the specifications of the VERMONT GAGE 141142890 pin gauge?
The VERMONT GAGE 141142890 is a Class X Go (Plus) pin gauge with a diameter of 0.4289 inches, a tolerance of 0.00004 inches, and is made of uncoated steel. It includes a Certificate of Accuracy with NIST Traceability for dimensional verification.
Where to buy VERMONT GAGE pin gauges worldwide?
3G Electric supplies VERMONT GAGE Class X pin gauges worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver precision gauges like the 141142890 to any location, ensuring compliance with your quality requirements.
How to select the correct Go pin gauge size for hole inspection?
Select a Go pin gauge that matches the minimum hole diameter specified in your drawing, such as the 0.4289-inch VERMONT GAGE Class X gauge. The Go end should enter the hole freely; if it does not, the hole is undersized. Always use a gauge with NIST-traceable certification for accuracy.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.4061 in to 0.5100 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
