VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.4413 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a precision inspection tool with a 0.4413 in diameter and a tolerance of 0.00004 in. Made from uncoated steel, this Go (Plus) gauge is used for verifying the minimum…
SKU 3G-OTH-216617
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a precision inspection tool with a 0.4413 in diameter and a tolerance of 0.00004 in. Made from uncoated steel, this Go (Plus) gauge is used for verifying the minimum acceptable hole size. It includes a Certificate of Accuracy with NIST Traceability for dimensional verification.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
This VERMONT GAGE Class X Go (Plus) Pin Gauge is used for precision inspection of machined holes. It verifies the minimum acceptable hole size by checking that a hole is not undersized. It is essential in quality control for manufacturing, aerospace, and automotive applications where tight tolerances are critical.
What are the specifications of the VERMONT GAGE 141144130 pin gauge?
The VERMONT GAGE 141144130 is a Class X Go (Plus) pin gauge with a diameter of 0.4413 in and a tolerance of 0.00004 in. It is made from uncoated steel and includes a Certificate of Accuracy with NIST Traceability. This inch-size gauge is designed for verifying minimum hole dimensions in precision engineering.
Where to buy VERMONT GAGE pin gauges worldwide?
3G Electric supplies VERMONT GAGE Class X Go Pin Gauges worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to source this 0.4413 in gauge with NIST-traceable certification for your quality inspection needs.
How to select the correct VERMONT GAGE pin gauge for hole inspection?
Select a VERMONT GAGE Class X Go (Plus) pin gauge based on the nominal hole diameter and tolerance required. For a 0.4413 in hole, use this gauge with 0.00004 in tolerance. Ensure the gauge is clean and at room temperature before use. Always refer to the Certificate of Accuracy for traceability.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.4061 in to 0.5100 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
