VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.4689 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141146890) is a 0.4689-inch diameter, uncoated steel go pin gauge with a tolerance of 0.00004 inches. It is a Class X Go (Plus) pin gauge, supplied with a Certificate…
SKU 3G-OTH-216733
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141146890) is a 0.4689-inch diameter, uncoated steel go pin gauge with a tolerance of 0.00004 inches. It is a Class X Go (Plus) pin gauge, supplied with a Certificate of Accuracy with NIST Traceability.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used to check the minimum acceptable hole diameter in precision machining and quality control. The 'Go' end must pass freely into the hole, confirming the hole is not undersized. It is essential for dimensional inspection in aerospace, automotive, and general manufacturing.
What are the specifications of the VERMONT GAGE 141146890 pin gauge?
The VERMONT GAGE 141146890 is a Class X Go (Plus) pin gauge with a diameter of 0.4689 inches, a tolerance of 0.00004 inches, and is made of uncoated steel. It includes a Certificate of Accuracy with NIST Traceability, ensuring traceable dimensional verification for critical inspection applications.
Where to buy VERMONT GAGE pin gauges worldwide?
3G Electric supplies VERMONT GAGE pin gauges worldwide, handling full logistics and customs clearance for international orders. As a global industrial solutions provider, we source and deliver genuine Class X Go pin gauges like the 141146890 to your facility, ensuring compliance with your inspection requirements.
How to select the correct VERMONT GAGE Go pin gauge size?
To select the correct VERMONT GAGE Go pin gauge, determine the minimum allowable hole diameter from your engineering drawing or tolerance specification. The Go gauge diameter should match the low limit of the hole tolerance. For a 0.4689-inch hole, use a 0.4689-inch Go gauge to verify the hole is not undersized.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.4061 in to 0.5100 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
